• 반도체디스플레이기술학회지
• /
• 제12권4호
• /
• pp.27-32
• /
• 2013

In this paper, the boost converter was implemented by digital control in many applications of the step-up. The PWM(pulse width modulation) control module of boost converter was digitized at power converter using the FPGA device and VHDL. The boost converter was designed to output a fixed voltage through the PI control algorithm of the PWM control module even if input voltage and output load are variable. The boost converter was digitized can be simplified by reducing the size of the module and the external control components. Thus, the digital power IC has advantageous for weight reduction and miniaturization of electronic products because it can be controlled remotely by setting the desired output voltage and PWM control module. The boost converter using the digital power IC was confirmed through experiments and the good performances were showed from experiment results.

• 한국안전학회지
• /
• 제1권1호
• /
• pp.27-32
• /
• 1986

To remove sulfur dioxide from flue gas by the method of metal oxide, copper powder of average diameter $2.4\mu\textrm{m}$and $51\mu\textrm{m}$ were used in a fixed bed reactor over a, temperature range of $300^{\circ}C-500^{\circ}C$. Copper oxide reacts with sulfur dioxide producing cupric sulfate and it can be regenerated from the latter by using hydrogen or methane. Experimental results showed that the reaction rate was increased by the increase of reaction temperature in the range of $300^{\circ}C-422^{\circ}C$ and the removal efficiency of sulfur dioxide was high in case of small size copper particle. However the removal efficiency was decreased at higher temperature due to decomposition of cupric sulfate. The rate controlling step of this reaction was chemical reaction and deactivating catalysts model can be applied to this reaction. The rate constants for this reaction and deactivation are as follows ： k＝8,367exp(-10,298/RT) Kd＝2.23exp(-8,485/RT)

• 전자공학회논문지B
• /
• 제32B권9호
• /
• pp.62-70
• /
• 1995

In some practical applications of the LMS Algorithm the coefficient adaptation can be performed only after some fixed delay. The resulting algorithm is known as the Delayed Least Mean Square (DLMS) algorithm in the literature. There exist analyses for this algorithm, but most of them are based on the unrealistic independence assumption between successive input vectors. Inthis paper we consider the DLMS algorithm with decreasing step size .mu.(n)=n/a, a>0 and prove the almost-sure convergence ofthe weight vector W(n) to the Wiener solution W$_{opt}$ as n .rarw. .inf. under the mixing unput condition and the satisfaction of the law of large numbers. Computer simulations for decision-directed adaptive equalizer with decoding delay are performed to demonstrate the functioning of the proposed algorithm.m.

• Nonlinear Functional Analysis and Applications
• /
• 제26권2호
• /
• pp.347-371
• /
• 2021

A plethora of applications from mathematical programmings, such as minimax, mathematical programming, penalization and fixed point problems can be framed as variational inequality problems. Most of the methods that used to solve such problems involve iterative methods, that is why, in this paper, we introduce a new extragradient-like method to solve pseudomonotone variational inequalities in a real Hilbert space. The proposed method has the advantage of a variable step size rule that is updated for each iteration based on previous iterations. The main advantage of this method is that it operates without the previous knowledge of the Lipschitz constants of an operator. A strong convergence theorem for the proposed method is proved by letting the mild conditions on an operator 𝒢. Numerical experiments have been studied in order to validate the numerical performance of the proposed method and to compare it with existing methods.

• 한국항행학회논문지
• /
• 제13권1호
• /
• pp.87-96
• /
• 2009

본 논문에서는 무선통신에서 유한개의 전략집합을 갖는 전력제어 문제를 게임이론을 통하여 분석하였다. 기존의 게임이론을 이용한 전력제어에서는 개방루프 제어에서와 같이 초기전송 전력을 결정하는 연속적인 게임 모델에 국한된 반면, 본 논문에서는 폐루프 전력제어에서와 정해진 전력제어 step size 만큼 전력을 올리거나 내리는 전력제어 문제를 게임 이론의 전형적인 모델 중의 하나인 죄수 딜레마 모형을 이용하여 분석하였다. 분석결과 전력을 올리는 전략이 내쉬 균형임을 증명하였고, 따라서 이와 같은 상황에서는 모든 단말기가 자신의 전력을 향상시키려고 시도하기 때문에 전체 시스템 측면에서는 효율적이지 못하다. 본 논문에서는 인접 셀 간 간섭이 심각한 환경에서 효율적인 전력제어 알고리즘을 구현하기 위하여 게임모형의 효용함수를 새롭게 정의하였고, 그 결과 모든 단말이 자신의 효용함수를 최대화 하려고 노력한다고 하더라도 자신의 송신 전력이 일정한 수준으로 유지될 수 있는 알고리즘을 개발하였다.

• International Journal of Control, Automation, and Systems
• /
• 제2권3호
• /
• pp.279-288
• /
• 2004

This paper presents a novel design for a tubular linear brushless permanent-magnet motor. In this design, the magnets in the moving part are oriented in an NS-NS―SN-SN fashion which leads to higher magnetic force near the like-pole region. An analytical methodology to calculate the motor force and to size the actuator was developed. The linear motor is operated in conjunction with a position sensor, three power amplifiers, and a controller to form a complete solution for controlled precision actuation. Real-time digital controllers enhanced the dynamic performance of the motor, and gain scheduling reduced the effects of a nonlinear dead band. In its current state, the motor has a rise time of 30 ms, a settling time of 60 ms, and 25% overshoot to a 5-mm step command. The motor has a maximum speed of 1.5 m/s and acceleration up to 10 g. It has a 10-cm travel range and 26-N maximum pull-out force. The compact size of the motor suggests it could be used in robotic applications requiring moderate force and precision, such as robotic-gripper positioning or actuation. The moving part of the motor can extend significantly beyond its fixed support base. This reaching ability makes it useful in applications requiring a small, direct-drive actuator, which is required to extend into a spatially constrained environment.

• 산업경영시스템학회지
• /
• 제41권2호
• /
• pp.1-8
• /
• 2018

K-means algorithm is one of the most popular and widely used clustering method because it is easy to implement and very efficient. However, this method has the limitation to be used with fixed number of clusters because of only considering the intra-cluster distance to evaluate the data clustering solutions. Silhouette is useful and stable valid index to decide the data clustering solution with number of clusters to consider the intra and inter cluster distance for unsupervised data. However, this valid index has high computational burden because of considering quality measure for each data object. The objective of this paper is to propose the fast and simple speed-up method to overcome this limitation to use silhouette for the effective large-scale data clustering. In the first step, the proposed method calculates and saves the distance for each data once. In the second step, this distance matrix is used to calculate the relative distance rate ($V_j$) of each data j and this rate is used to choose the suitable number of clusters without much computation time. In the third step, the proposed efficient heuristic algorithm (Group search optimization, GSO, in this paper) can search the global optimum with saving computational capacity with good initial solutions using $V_j$ probabilistically for the data clustering. The performance of our proposed method is validated to save significantly computation time against the original silhouette only using Ruspini, Iris, Wine and Breast cancer in UCI machine learning repository datasets by experiment and analysis. Especially, the performance of our proposed method is much better than previous method for the larger size of data.

• 한국인터넷방송통신학회논문지
• /
• 제21권4호
• /
• pp.75-80
• /
• 2021

본 논문은 DSE-MMA (Dithered Sign Error-MMA) 적응 등화기에서 adaptive modulus와 adaptive stepsize를 이용하여 등화 성능을 개선할 수 있는 Hybrid-DSE-MMA에 관한 것이다. DSE-MMA는 탭 계수 갱신을 위한 오차 신호를 얻을 때 dither 신호를 부가한 후 이의 부호만을 이용하므로 SE-MMA의 외부 잡음에 대한 robustness 성능을 개선시키지만, 고정 modulus와 stepsize를 이용하므로 수렴 속도와 잔류 isi 성능이 저하되는 단점이 있다. 논문에서는 등화기 출력 신호의 전력에 비례하는 adaptive modulus와 adaptive stepsize를 DSE-MMA에 적용하므로서 저하되는 등화 성능을 개선할 수 있음을 컴퓨터 시뮬레이션을 통해 확인한다. 개선된 등화 성능을 기존 DSE-MMA와 비교하기 위하여 수신측에서의 등화기 출력 신호인 복원된 신호 성상도, 잔류 isi, MD (Maximum Distortion), MSE 및 외부 잡음에 대한 알고리즘의 강인성을 알 수 있는 SER 성능을 사용하였다. 컴퓨터 시뮬레이션 결과 Hybrid-DSE-MMA 알고리즘은 모든 잔류 isi와 MD, MSE 및 SER등의 모든 성능 지수에서 DSE-MMA 보다 개선 되지만 수렴 속도가 늦어짐을 알 수 있었다.

• 방사선산업학회지
• /
• 제9권2호
• /
• pp.85-90
• /
• 2015

Purpose: Time of operation has been reduced and accuracy of operation has been improved since C-arm, which offer real-time image of patient, was introduced in operation room. However, because of the contamination of patient, C-arm could not be used more appropriately. Therefore, this study is to know factors of controlling exposure dose, image quality and the exposed dose of health professional in operation room. Materials and methods: Height of Wilson frame (bed for operation) was fixed at 130 cm. Then, Model 76-2 Phantom, which was set by assembling manual of Fluke Company, was set on the bed. Head/Spine Fluoroscopy AEC mode was set for exposure condition. According to detector size of C-arm, the absorbed dose per min was measured in the 7 steps OFD (cm) from 10 cm to 40 cm (10, 15, 20, 25, 30, 35, 40 cm). In each step of OFD, the absorbed dose per min of same diameter of collimation was measured. Moreover, using Nero MAX Model 8000, exposure dose per min was measured according to 3 step of distance from detector (20 cm, 60 cm, 100 cm). Finally, resolution was measured by CDRH Disc Phantom and magnification of each OFD was measured by aluminum stick bar. Result: According to detector size of C-arm, difference of absorbed dose shows that the dose of 20 cm OFD is 1.750 times higher than the dose of 40 cm OFD. It means that the C-arm, which has smaller size of detector, shows the bigger difference of absorbed dose per min (p<0.05). In the difference of absorbed dose in the same step of OFD (from 20 cm to 40 cm), the absorbed dose of 9 inch detect or C-arm was 1.370 times higher than 12 inch' s (p<0.05). When OFD was set to 20 cm OFD, the absorbed dose of non-collimation case was approximately 0.816 times lower than the absorbed dose of collimation cases (p<0.05). When the distance was 20 cm from detector, exposed does includes first-ray and scatter-ray. When the distance was 60 cm and 100 cm from detector, exposed does includes just scatter-ray. So, there was the 2.200 times difference of absorbed does. Finally, when OFD was increased, spatial resolution was 4 to 5 step was increased. However, low contrast resolution was not relative. Moreover, there was 1.363 times difference of magnification (p<0.05). Conclusion: When C-Arm is used, avoiding contamination of patient is more important factor than reducing exposed dose of health professional in operation room. Just controlling exposure time is just way to reduce the exposed does of workers. However, in the case, non-probability influence could be occurred. Therefore, this study proved that the exposed dose will be reduced if the factors such as using small detector size of C-arm, setting OFD from 20 cm to 25 cm and non-collimating. Moreover, dose management of C-arm in the non-interesting area will be considered additionally.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.230-235
• /
• 2009

In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.