• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.578-583
• /
• 2016

본 논문에서는 이중루프 구조를 갖는 다중모드 무선전력전송 시스템을 제안하였다. 본 논문에서 제안한 다중모드 무선전력전송 시스템은 두 개의 서로 다른 주파수 6.78 MHz 자기공진 무선전력전송 모드와 13.56 MHz NFC 모드로 동작하는 외부 루프 모듈과 두 개의 서로 다른 주파수에서 동작하는 자기유도 표준인 WPC 모드와 PMA 모드로 동작하는 외부 루프와 연결된 내부 루프 모듈로 구성된다. 실제 상용 스마트폰 배터리 커버에 장착하기 위해 페라이트 시트를 포함한 $45{\times}90{\times}0.35mm3$ 크기에 맞춰 설계 및 최적화 되었다. 제안된 다중모드 무선전력전송 시스템은 기존의 자기유도방식 표준에 해당하는 WPC와 PMA를 지원할 뿐만 아니라 6.78 MHz 및 13.56 MHz에서 20 dB 이상의 반사손실 특성을 나타내었고 6.78 MHz 자기공진 무선충전 환경에서는 공진코일 간 70% 이상의 효율 특성을 갖는다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.168-168
• /
• 1999

Recently, Fe/Si multilayered films (MLF) have been a focus of interest due to the strong antiferromagnetic (AF) coupling observed in such kind of MLF originates from the same nature as in the metal/metal MLF. In particular, a question of whether the spacer layer in the Fe/Si MLF is metallic or semiconducting is of interest. In spite of various experimental techniques envolved in the study, the chemical composition and the properties of the interfacial regions in the MLF exhibiting the AF coupling is still questionable. The nature of the AF coupling and the interfacial properties of Fe/Si MLF are investigated in this study. A series of Fe/Si MLF with a fixed nominal thickness of Fe(3nm) and a variable thickness of Sk(1.0-2.2nm) were deposited by RF-sputtering onto glass substrates at room temperature. The atomic structures and the actual sublayer thicknesses of the Fe/Si MLF are investigated by using x-ray diffraction. The magnetic-field dependence of the equatorial Kerr effect clearly shows an appearance of the AF coupling between Fe sublayers at tsi = 1.5 - 1.8 nm. the drastic discrepancies between the experimental magnetooptical (MO) and optical properties, and based on the assumption of sharp interfaces between Fe and Si sublayers leads to a conclusion that pure si is absent in the AF-coupled Fe/Si MLF. Introducing in the model nonmagnetic semiconducting FeSi alloy layers between Fe and Si sublayers or as spacer between pure Fe sublayers only slightly improves the agreement between model and experiment. A reasonable agreement between experimental and simulated MO spectra was reached with using the fitted optical properties for the spacer with a typical metallic type of behavior. The results of the magnetic properties measured by vibrating sample magnetometer and magnetic circular dichroism are also analyzed in connection with the MO and optical properties.

• 한국자기학회지
• /
• 제20권6호
• /
• pp.207-211
• /
• 2010

우리는 증기전달법(vapor transport method)으로 성장된 $Cr_5S_6$ 단결정의 자기저항 효과를 연구하였다. 상온에서의 X-선 회절 (X-ray diffraction) 연구는 삼방구조(trigonal structure)를 가지는 단결정의 상 형성을 보여주었다. 5 K~400 K 온도영역에서 온도의 함수로 자기장(0.1 T, 5 T)을 걸어주면서 자화를 측정하였다. 자화의 온도의존성 결과로부터 $Cr_5S_6$의 두 가지 상태변화를 확인 할 수 있었다. 첫 번째는 150 K 근처에서 반강자성에서 준강자성으로의 전이가 일어나고, 두 번째는 준강자성에서 상자성으로의 전이가 300 K 근처에서 일어난다. 0 T와 5 T의 자기장에서 측정한 온도에 따른 저항의 변화는 150 K 근처에서 반강자성-준강자성 전이를 보여주면서 금속성을 보여주었다. 자기장의 변화에 따른 자화의 변화를 고정된 온도(100 K, 150 K, 200 K, 그리고 300 K)에서 측정하였다. 200 K과 300 K에서는 M-H 이력 현상을 잘 보여주는 반면에, 100 K과 150 K에서는 이력 현상을 보여주지 않았다. 150 K, 즉 반강자성 전이온도에서 $Cr_5S_6$는 5 T의 자기장 하에서 약 -2%의 음의 자기저항(magnetoresistance)이 관찰되었다.

• 대한치과보철학회지
• /
• 제43권2호
• /
• pp.232-247
• /
• 2005

Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)

• 자원환경지질
• /
• 제31권1호
• /
• pp.53-57
• /
• 1998

Transient electromagnetic (TEM) method is also affected by cultural and natural electromagnetic (EM) noises, since it uses part of the broadband ($10^{-2}$ to $10^5Hz$) spectrum. Especially, predominant EM noise which affects a moving transmitter-receiver TEM system is sensor motion-induced noise. This noise is caused by the sensor motion in the earth magnetic field. The technique for reducing the sensor motion-induced EM noise presented in this paper is based on Halverson stacking. This Halverson stacking is generally used in a time-domain induced polarisation (IP) system to reject DC offset and linear drift. According to spectrum analysis of the vertical component of sensor motion-induced noise, the frequency range affected by the motion of an EM sensor is less than about 700 Hz in this study. With the decrease of the frequency, the spectral power caused by the motion of a sensor increases. For example, at the frequency of 200 Hz, the spectral power of the sensor motion-induced noise is $-90dBVrms^2$ while the spectral power of the EM noise measured with a fixed sensor on the ground is $-105dBVrms^2$, and at the frequency of 100 Hz, the spectral power of the sensor motion-induced noise is $-70dBVrms^2$ while the spectral power of the EM noise measured with a fixed sensor on the ground is $-105dBVrms^2$. With applying Halverson stacking to an artificial noise transient generated by adding a noise-free transient to sensor motion-induced noise measured without pulsing, it is shown that the filtered transient is nearly consistent with the noise-free transient within a delay time of $0.5{{\mu}sec}$. The inversion obtained from this filtered transient is in accord with the true model with an error of 5%.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권2호
• /
• pp.7-10
• /
• 2005

The magnetic properties of a series of both annealed (biaxially textured) and as-rolled (non-textured) Ni-xW alloy tapes with compositions x = 0,1,3, and 5 at.$\%$, were studied. Characterization methods included XRD analyses to investigate the biaxial cube texturing of the annealed Ni-W alloy tapes and studies of the magnetization M for both annealed and as-rolled Ni-W alloy tapes. Both the isothermal mass magnetizations M(H) of a series of samples at different fixed temperatures and M(T) in fixed field, employing a PPMS-9 (Quantum Design), were measured. The Ni-W alloys have shown much reduced ferromagnetism as W-content x increases. Both the saturation magnetization Msat and Curie temperature Tc decrease linearly with W-content x, and both Msat and Tc go to zero at critical concentration of Xc - 9.50 at. $\%$ W.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.579-591
• /
• 2015

This paper investigates a magnetoelectric (ME) vibration energy harvester that can scavenge energy in arbitrary directions in a plane as well as wide working bandwidth. In this harvester, a circular cross-section cantilever rod is adopted to extract the external vibration energy due to the capability of it's free end oscillating in arbitrary in-plane directions. And permanent magnets are fixed to the free end of the cantilever rod, causing it to experience a non-linear force as it moves with respect to stationary ME transducers and magnets. The magnetically coupled cantilever rod exhibits a nonlinear and two-mode motion, and responds to vibration over a much broader frequency range than a standard cantilever. The effects of the magnetic field distribution and the magnetic force on the harvester's voltage response are investigated with the aim to obtain the optimal vibration energy harvesting performances. A prototype harvester was fabricated and experimentally tested, and the experimental results verified that the harvester can extract energy from arbitrary in-plane directions, and had maximum bandwidth of 5.5 Hz, and output power of 0.13 mW at an acceleration of 0.6 g (with $g=9.8ms^{-2}$).

• Journal of Korean Neurosurgical Society
• /
• 제67권2호
• /
• pp.249-256
• /
• 2024

The Leksell frame-based transcerebellar approach was proposed with the arc support frame attached upside down to the Z coordinate. This study presented practical tips and considerations for obtaining adequate tissue samples for deep-seated cerebellar lesions or lower brainstem lesions specifically those accessible via the cerebellar peduncle. For practical insights, the Leksell coordinate frame G was fixed to prevent the anterior screw implantation within the temporalis muscle, to avoid interference with the magnetic resonance (MR)-adapter, and taking into account the magnetic field of MR in close proximity to the tentorium. After mounting of indicator box, the MR imaging evaluation should cover both the indicator box and the infratentorial region that deviated from it. The coordinates [X, Y, Za, Arc⁰, Ringa⁰] obtained from Leksell SurgiPlan^® software (Elekta, Stockholm, Sweden) with arc 0⁰ located on the patient's right side were converted to [X, Y, Zb=360-Za, Arc⁰, Ringb⁰=Ringa⁰-180⁰]. The operation was performed in the prone position under general anesthesia in four patients with deep cerebellar (n=3) and brainstem (n=1) tumors. The biopsy results showed two cases of diffuse large B-cell lymphoma, one metastatic braintumor and one glioblastoma. One patient required frame repositioning as a complication. Drawing upon the methodology outlined in existing literature, we anticipate that imparting supplementary expertise could render the stereotactic biopsy of infratentorial tumors more consistent and manageable for the practitioner, thereby facilitating adequate tissue samples and minimizing patient complications.

• 암석학회지
• /
• 제24권3호
• /
• pp.193-207
• /
• 2015

이 연구에서는 한양도성 석재공급지 추정을 위해 고문헌을 분석하고 산지탐색 지점에 대한 광역조사를 수행하여 암석학적 기초 데이터베이스를 구축하였다. 고문헌 분석 결과를 종합하면 성돌은 조선 초기에 주로 도성과 인접한 석산에서 조달된 반면 후기로 갈수록 도성 외부의 고정 채석장으로부터 공급되었다. 따라서 고문헌에 기록된 채석 산지를 중심으로 암석학적 조사를 수행한 결과, 산지탐색 전역에 걸쳐 담홍색화강암과 우백질화강암이 분포하였으며, 이들 화강암류는 광물조성 및 지구화학적 거동특성이 거의 유사하였다. 그러나 담홍색화강암은 남산 북사면에서 불암산의 북동방향으로 갈수록 대자율 값이 증가하는 자철석 계열을 보였으며, 우백질화강암은 용마산을 시작으로 남산과 인왕산 등의 편마암 경계부에 주로 나타나고 티탄철석계열의 낮은 대자율 특성을 가졌다. 이상의 내용을 종합할 때, 한양도성 석재공급지 추정을 위한 중요한 암석학적 지시자는 색상과 대자율로 판단된다. 이와 함께 채석장의 석재 양, 운반거리 및 기술력 등을 고려하여 원산지 해석의 신뢰도를 높일 필요가 있다.

• 전자공학회논문지SC
• /
• 제47권2호
• /
• pp.1-7
• /
• 2010

본 논문은 Air-cored induction 코일 센서의 고주파 동작 특성에 대한 실험적 관계식을 제시한다. Air-cored induction 코일 센서는 입, 출력 간 선형성이 좋고 저주파 영역에서 정확한 출력 특성 예측이 가능해서 널리 사용되지만 민감도가 낮다는 단점이 있다. 반면, 고주파 영역에서는 코일 센서 구성상의 기생효과로 인해 민감도가 크게 향상되지만 인가되는 자기장 주파수에 대한 출력 민감도의 의존성으로 인해 사용이 제한되어 왔다. 그러나 최근 고정된 주파수의 자기장을 대상으로 하는 비파괴 자기 검사법에서 검사 성능을 향상시키기 위하여 이와 같은 코일 센서의 고주파 특성을 이용하기 시작하였는데 코일 센서를 고주파 영역에서 사용하기 위해서는 고주파 영역에서의 센서 특성에 대한 예측이 요구된다. 본 논문에서는 다양한 코일 센서의 구성 조건하에서 코일 센서의 주파수 응답 특성을 측정하고 이 측정 결과를 기반으로 하여, 민감도가 최대가 되는 공진 주파수와 최대 민감도를 코일 센서 단면의 지름, 권선 지름, 그리고 권선 수와 같은 구성 파라미터의 함수식으로 근사하였다. 함수식은 실험결과를 잘 반영하며, 추론된 함수식으로부터 원하는 사양을 가지는 코일 센서의 구성 방안 및 관련 회로 설계 사양을 얻을 수 있다.