• Journal of Veterinary Clinics
• /
• v.25 no.6
• /
• pp.545-548
• /
• 2008

A 3-year-old castrated male Siberian husky was presented for evaluation after being hit by a car. On physical examination, the dog showed open-mouth, displacement of mandible and hypersalivation with blood ting. The base of tongue was transected almost 80% on the bias from right dorsal side to the left ventral side. Radiography demonstrated separation of mandible symphysis, and fracture of right condyle and vertical ramus. After debridement of the necrotic tissue, tongue apposition with simple interrupted suture was performed. Mandibular symphysis, condyle and mandibular vertical ramus fractures were fixed using pin, cerclage wire, T-plate, and K-wires. The mouth was irrigated daily using chlorhexidine after surgery. The sutures that were loose here or untied at tongue were re-sutured under sedation. The transected tongue was healed and recovered its normal movement after 6 weeks.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.362-367
• /
• 2018

A complementary metal oxide semiconductor (CMOS) binary image sensor is proposed for low-power and low-noise operation. The proposed binary image sensor has the advantages of reduced power consumption and fixed pattern noise (FPN). A gate/body-tied (GBT) p-channel metal-oxide-semiconductor field-effect transistor (PMOSFET)-type photodetector is used as the proposed CMOS binary image sensor. The GBT PMOSFET-type photodetector has a floating gate that amplifies the photocurrent generated by incident light. Therefore, the sensitivity of the GBT PMOSFET-type photodetector is higher than that of other photodetectors. The proposed CMOS binary image sensor consists of a pixel array with $394(H){\times}250(V)$ pixels, scanners, bias circuits, and column parallel readout circuits for binary image processing. The proposed CMOS binary image sensor was analyzed by simulation. Using the dynamic comparator, a power consumption reduction of approximately 99.7% was achieved, and this performance was verified by the simulation by comparing the results with those of a two-stage comparator. Also, it was confirmed using simulation that the FPN of the proposed CMOS binary image sensor was successfully reduced by use of the double sampling process.

• Journal of Sensor Science and Technology
• /
• v.28 no.2
• /
• pp.101-105
• /
• 2019

ZnS substrates with excellent transmittance in the mid-infrared region ($3-5{\mu}m$) were prepared using hot pressing instead of conventional chemical vapor deposition (CVD). Diamond-like carbon(DLC) was coated on either one or both sides of the ZnS substrates to improve their mechanical properties and transmittance. More specifically DLC was coated using CVD with an Ar and $C_2H_2$ mixed gas, and Ge was used as the bonding layer. During CVD, the bias voltage was fixed to 500 V and analyzed by Fourier transform infrared spectroscopy (FT-IR), nanoindenter, scanning electron microscope and energy dispersive spectrometry. Results of hardness analysis using the nanoindenter, showed that DLC coating increased from 5.9 to 17.7 GPa after deposition. The FT-IR spectroscopy results showed that, in the mid-infrared region ($3-5{\mu}m$), the average transmittance of the samples with DLC coating on one and both sides increased by approximately 6% and approximately 11.2% respectively. In conclusion, the DLC coating improved the durability and transmittance of the ZnS substrates.

• The korean journal of orthodontics
• /
• v.49 no.3
• /
• pp.140-149
• /
• 2019

We are currently living in an era where the use of computer-aided design/computer-aided manufacturing has allowed individualized orthodontic treatments, but has also incorporated enhanced digitalized technology that does not permit improvisation. The purpose of this systematic review was to analyze publications that assessed the accuracy and efficiency of the $Invisalign^{(R)}$ system. A systematic review was performed using a search strategy to identify articles that referenced $Invisalign^{(R)}$, which were published between August 2007 and August 2017, and listed in the following databases: MEDLINE, Embase, Cochrane Library, Web of Knowledge, Google Scholar, and LILACS. Additionally, a manual search of clinical trials was performed in scientific journals and other databases. To rate the methodological quality of the articles, a grading system described by the Swedish Council on Technology Assessment in Health Care was used, in combination with the Cochrane tool for risk of bias assessment. We selected 20 articles that met the inclusion criteria and excluded 5 due to excess biases. The level of evidence was high. Although it is possible to treat malocclusions with plastic systems, the results are not as accurate as those achieved by treatment with fixed appliances.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.841-850
• /
• 2021

This study aims to evaluate the relationship between bank capital, efficiency, and risk in Islamic banks. We use data from 129 Islamic banks in the world, retrieved from various data sources. We retrieved specific banking data from Moody's Analytics BankFocus and Thomson Reuters Eikon, while data at the country level was obtained from the World Bank website. This study uses various estimates both Pooled OLS (Ordinary Least Square) and Random Effect (RE). However, to overcome the issue of serial correlation which could cause bias in the results of the study, we used fixed-effect (FE) cluster estimates. The research results confirm the previous findings that bank capital positively affects bank stability (natural logarithm of Z-Score) and negatively affects credit risk (loan loss provision to total liabilities). The findings also show that efficiency has the same effect. The interaction test of bank capital and efficiency shows that efficiency encourages banks to reduce risk, including when bank capital is relatively lower. This finding is expected to have implications for the authorities to boost bank efficiency in addition to establishing several regulations related to capital. The efficiency implemented by the bank will encourage banks to act prudently so that the bank can maintain its performance through risk mitigation.

• Electrical & Electronic Materials
• /
• v.16 no.9
• /
• pp.63.2-64
• /
• 2003

Epitaxial yttrium-stabilized HfO$_2$ thin films were deposited on p-type (100) Si substrates by pulsed laser deposition at a relatively lower substrate temperature of 550. Transmission electron microscopy observation revealed a fixed orientation relationship between the epitaxial film and Si; that is, (100)Si.(100)HfO$_2$ and [001]Si/[001]HfO$_2$. The film/Si interface is not atomically flat, suggesting possible interfacial reaction and diffusion, X-ray photoelectron spectrum analysis also revealed the interfacial reaction and diffusion evidenced by Hf silicate and Hf-Si bond formation at the interface. The epitaxial growth of the yttrium stabilized HfO$_2$ thin film on bare Si is via a direct growth mechanism without involoving the reaction between Hf atoms and SiO$_2$ layer. High-frequency capacitance-voltage measurement on an as-grown 40-A yttrium-stabilized HfO$_2$ epitaxial film yielded an dielectric constant of about 14 and equivalent oxide thickness to SiO$_2$ of 12 A. The leakage current density is 7.0${\times}$ 10e-2 A/$\textrm{cm}^2$ at 1V gate bias voltage.

• Current Optics and Photonics
• /
• v.7 no.4
• /
• pp.408-418
• /
• 2023

Due to the technological limitations of infrared thermography, infrared focal plane array (IFPA) imaging exhibits stripe non-uniformity, which is typically fixed pattern noise that changes over time and temperature on top of existing non-uniformities. This paper proposes a stripe non-uniformity correction algorithm based on scene-adaptive nonlinear filtering. The algorithm first uses a nonlinear filter to remove single-column non-uniformities and calculates the actual residual with respect to the original image. Then, the current residual is obtained by using the predicted residual from the previous frame and the actual residual. Finally, we adaptively calculate the gain and bias coefficients according to global motion parameters to reduce artifacts. Experimental results show that the proposed algorithm protects image edges to a certain extent, converges fast, has high quality, and effectively removes column stripes and non-uniform random noise compared to other adaptive correction algorithms.

• Journal of the Korean Magnetics Society
• /
• v.25 no.3
• /
• pp.67-73
• /
• 2015

This is a basic research for improving soft magnetic property of Fe based nano crystalline alloy powder core. The main study is done around characteristics of permeability, core loss, and DC bias depending on amount of insulation coating agent and particle size. First, $Fe_{73.5}Si_{13.5}B_9Nb_3Cu_1$ amorphous alloy ribbon was fabricated by using the planar flow casting (PFC) device. Then, heat treatment and ball milling were done to obtain alloy powder. The amount of polyether imide (PEI) added to it was varied by 0.5, 1.0, 2.0, 2.5 wt% to have compression molding into $16ton/cm^2$. After going through crystalline heat treatment, the made toroidal nano crystalline powder core ($OD12.7mm^*ID7.62mm^*H4.75mm$) had smaller permeability as amount of insulation coating agent decreases. However, it was found out that core loss and DC bias characteristics have been improved. The reason for this results were expected to be because green density of power core decreases as amorphous alloy powder particles become smaller as amount of alloy powder insulation coating agent increases, it was determined that 1 wt% of insulation coating agent is appropriate. Also, for powder core made based on alloy powder size with amount of insulation coating agent fixed at 1 wt%, effective permeability and core loss were outstanding as particle size became bigger. However, characteristics of DC bias became worse as applied DC field increases. This is expected to be due to insulation effect, residual pores, or molding density of powder core resulting from thickness of coating on surface of alloy powder.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.9
• /
• pp.4783-4788
• /
• 2012

Objective: Previous studies of the association between X-ray cross-complementing group 1 (XRCC1) gene polymorphisms and the gliomas risk have yielded conflicting results, and thus a meta-analysis was performed to provide a more accurate estimation. Methods: A computerized literature search of 5 electronic databases was conducted to identify the relevant studies. Fixed or random effect models were selected based on the heterogeneity test. Publication bias was estimated using Begg's funnel plots and Egger's regression test. Results: A total of 11 studies (3,810 cases and 6,079 controls), 7 studies (2,928 cases and 5,048 controls), and 4 studies (1,461 cases and 2,593 controls) were finally included in the analyses of the association between XRCC1 Arg399Gln, Arg194Trp, and Arg280His polymorphisms and glioma risk, respectively. The pooled results showed that GlnGln carriage was associated with moderately increased risk of gliomas in Asians (GlnGln vs. ArgArg, OR=1.490, 95%CI 1.031-2.153; GlnGln/ArgGln vs. ArgArg, OR=1.321, 95%CI 1.037-1.684), whereas a marginal association was revealed in Caucasians. For the Arg194Trp polymorphism, although a significant association was shown in the homozygous genotype comparisons (TrpTrp vs. ArgArg, OR = 2.209, 95%CI 1.398-2.945), no significant link was found on subgroup analysis stratified by ethnicity. With regard to the Arg280His polymorphism, no significant association was found in each comparison. No particular study was found to significantly influence the pooled results, and no potential publication bias was detected. Conclusions: This meta-analysis suggested that the XRCC1 Arg399Gln polymorphism is moderately associated with increased risk of gliomas in Asians, while Arg194Trp and Arg280His polymorphisms demonstrated no significant influence. Due to the limited studies and the potential confounders, further studies are needed to confirm these results.

• Journal of Distribution Science
• /
• v.14 no.1
• /
• pp.93-102
• /
• 2016

Purpose - The purpose of paper is studying the static and dynamic side for long-term memory storage properties, and increase the explanatory power regarding the long-term memory process by looking at the long-term storage attributes, Korea Composite Stock Price Index. The reason for the use of GPH statistic is to derive the modified statistic Korea's stock market, and to research a process of long-term memory. Research design, data, and methodology - Level shifts were subjected to be an empirical analysis by applying the GPH method. It has been modified by taking into account the daily log return of the Korea Composite Stock Price Index a. The Data, used for the stock market to analyze whether deciding the action by the long-term memory process, yield daily stock price index of the Korea Composite Stock Price Index and the rate of return a log. The studies were proceeded with long-term memory and long-term semiparametric method in deriving the long-term memory estimators. Chapter 2 examines the leading research, and Chapter 3 describes the long-term memory processes and estimation methods. GPH statistics induced modifications of statistics and discussed Whittle statistic. Chapter 4 used Korea Composite Stock Price Index to estimate the long-term memory process parameters. Chapter 6 presents the conclusions and implications. Results - If the price of the time series is generated by the abnormal process, it may be located in long-term memory by a time series. However, test results by price fixed GPH method is not followed by long-term memory process or fractional differential process. In the case of the time-series level shift, the present test method for a long-term memory processes has a considerable amount of bias, and there exists a structural change in the stock distribution market. This structural change has implications in level shift. Stratum level shift assays are not considered as shifted strata. They exist distinctly in the stock secondary market as bias, and are presented in the test statistic of non-long-term memory process. It also generates an error as a long-term memory that could lead to false results. Conclusions - Changes in long-term memory characteristics associated with level shift present the following two suggestions. One, if any impact outside is flowed for a long period of time, we can know that the long-term memory processes have characteristic of the average return gradually. When the investor makes an investment, the same reasoning applies to him in the light of the characteristics of the long-term memory. It is suggested that when investors make decisions on investment, it is necessary to consider the characters of the long-term storage in reference with causing investors to increase the uncertainty and potential. The other one is the thing which must be considered variously according to time-series. The research for price-earnings ratio and investment risk should be composed of the long-term memory characters, and it would have more predictability.