• Title/Summary/Keyword: fishing ship

Search Result 963, Processing Time 0.024 seconds

A study on the resistance affecting on the engine power in towing fishing gear of a bottom trawl ship (저층 트롤선의 예망 시 기관출력에 영향을 미치는 저항들에 관한 고찰)

  • Woo-Gyeong WANG
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.59 no.4
    • /
    • pp.344-353
    • /
    • 2023
  • In the actual sea, the additional resistance due to external force such as wind, current and wave is accompanied, and the required power is added in response to these resistance. Especially when the ship is sailing at low speed, the effects of wind and current have a great impact on the safe control of the ship. Likewise, it is thought that the effects of wind and current have a great impact on the trawl ship control since the towing speed of a bottom trawl ship is a low speed of 3 to 4 knots. If the reduce of ship speed and the increase of engine power due to the influence of wind and current can be identified, the safe towing power can be calculated based on a given engine output. Thus, the appropriate size of a fishing gear can be determined. In this study, a total of 20 trawl operations were conducted for seasonal maritime research in the same research area according to the operation mode of propeller. Based on navigation data, trawl fishing data, and engine performance data acquired during the towing fishing gear, and data of ship speed, hull resistance, fishing gear resistance, wind force and current force according to an incidence angle were estimated. The overall power for these loads was calculated and compared with the measured engine power, and the effects of wind force and current force on the engine power were investigated.

Evaluating the Application Feasibility of Lithium-Battery Electric Propulsion for Fishing Boats

  • Haiyang Zhang;Jaewon Jang;Maydison;Daekyun Oh;Zhiqiang Han
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.60 no.3
    • /
    • pp.175-185
    • /
    • 2023
  • Many small vessels such as fishing boats operate in the world's oceans; accordingly, interest in these small vessels' exhaust-gas problem is increasing. Research on the application of electric-propulsion technology has been steadily conducted; however, the subject is limited to research ships or leisure boats, while research on application efficiency remains insufficient. This study attempts to apply lithium-battery electric-propulsion technology to small ships. A gross tonnage of 9.77, a representative fishing boat, is to be redesigned as a fully electrified ship. Without changing the main cabin's dimensions and fuel tanks, the ship's propulsion system is redesigned based on a lithium-battery electric-propulsion system. In addition, the redesigned system is compared with the original sample ship's diesel-propulsion system for application-effect analysis. The results indicate that under controlled sailing conditions, the weight and volume of the electric-propulsion system are 9.5 and 10.5 times those of the diesel-propulsion system, respectively. These values indicate that the system cannot meet fishing boats' high endurance requirements. Therefore, under the existing technical conditions, applying the full lithium-battery electric-propulsion system to solve the problem of high emissions from fishing boats shows limited feasibility.

A Study on the Analysis of Marine Accidents on Fishing Ships Using Accident Cause Data (사고 데이터의 주요 원인을 이용한 어선 해양사고 분석에 관한 연구)

  • Sang-A Park;Deuk-Jin Park
    • Journal of Navigation and Port Research
    • /
    • v.47 no.1
    • /
    • pp.1-9
    • /
    • 2023
  • Many studies have analyzed marine accidents, and since marine accident information is updated every year, it is necessary to periodically analyze and identify the causes. The purpose of this study was to prevent accidents by identifying and analyzing the causes of marine accidents using previous and new data. In marine accident data, 1,921 decisions by the Korea Maritime Safety Tribunal on marine accidents on fishing ships over 16 years were collected in consideration of the specificity of fishing ships, and 1,917 cases of accident notification text history by the Ministry of Maritime Affairs and Fisheries over 3 years were collected. The decision data and text data were classified according to variables and quantified. Prior probability was calculated using a Bayesian network using the quantified data, and fishing ship marine accidents were predicted using backward propagation. Among the two collected datasets, the decision data did not provide the types of fishing ships and fishing areas, and because not all fishing ship accidents were included in the decision data, the text data were selected. The probability of a fishing ship marine accident in which engine damage would occur in the West Sea was 0.0000031%, as calculated by backward propagation. The expected effect of this study is that it is possible to analyze marine accidents suitable for the characteristics of actual fishing ships using new accident notification text data to analyze fishing ship marine accidents. In the future, we plan to conduct research on the causal relationship between variables that affect fishing ship marine accidents.

The causes and counterplan for marine casualties of fishing boats according to the fishing types (어선의 업종별 해양사고의 원인과 대책)

  • KIM, Su-Hyung;KIM, Hyung-Seok;LEE, Yoo-Won
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.56 no.3
    • /
    • pp.246-257
    • /
    • 2020
  • According to the statistics of KMST (2010~2019), 68.5% of marine casualties have been occurred in fishing boats in the last 10 years. Although the incidence rate of annual average per ship is 10.4% for merchant ships and 2.3% for fishing boats, it is necessary to first reduce the marine casualties of fishing boats in order to reduce the occurrence of the whole marine casualty, considering that the number of registered fishing boats are 86.5% of the total. In this study, the top 10 fishing types with high occurring marine casualties in the past 10 years were selected using the statistics of KMST. Then, the causes of the marine casualties, focusing on the collision, were analyzed and counterplan were suggested. The biggest marine casualty that the top 10 fishing types have caused in the past 10 years was a collision, accounting for 71.7% of the total, and the rest were less than 10.0% each. Also, it was found that the biggest environment and cause of the collision were due to human factors such as poor look out or negligence of duty. Eventually, it was concluded that a reduction in the human factors for the causes basically, could lower the incidence of the marine casualties. Therefore, if the continuous and systematic correcting education of the attitude toward the ship operating of seafarers could conducted with the focus on the main human factors, the whole marine casualties will be expected to decrease gradually.

Ship Stability Calculation for Cause Analysis of No. 501 Oryong Sinking Accident

  • Lee, Sang-Gab;Lee, Jae-Seok;Ki, Jee-Hun
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2018.11a
    • /
    • pp.248-255
    • /
    • 2018
  • Deep-sea fishing vessel No. 501 Oryong was fully flooded through the openings and was sunk down to the bottom of sea due to the very rough sea weather on the way of evasion after fishing operation in the Bearing Sea with many crews dead and/or missed. In this study, calculation of ship stability was carried out using KST-SHIP(ship calculation system of KST), considering the effect of flow fluid and fish catch arrangement according to the progress of its sinking accident, and damage stability was analyzed. For this study, intact stability calculation of its accident ship under the full load departure condition and its calculation result were verified by comparing with each other, and intact stability according to displacement from the departure of accident ship just before the accident was calculated and analyzed. Damage stability was calculated according to the progress during sinking accident and also analyzed.

  • PDF

A Study on the Occupational Orientation of the Junior Ship Officer in Fishing Vessel (어선에 종사하는 초급 해기사의 직업 지향에 관한 연구)

  • KIM, Young-Un
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.27 no.3
    • /
    • pp.725-734
    • /
    • 2015
  • In contemporary society, many fishery industries face a serious problem of having an insufficient number of junior ship officers and engineers. Even though many fishery high schools in Korea made significant effort to produce many talented junior officers and engineers, but after graduation, the students are reluctant to get a job on the fishing vessels. Furthermore, Korean government also invested a large amount of money to train students for ocean-going and costal & near-ocean fishing vessels. However, despite the government's great effort on the training program and education, only a few students wish to work on the fishing vessels. In this article, the author tried to find answers for various questions such as what are the factors that the student prefer, where the student to want to get a job in fishery industries, and how student feel about working at fishing vessels. Furthermore, the author also analyzed the differences between high school student group and Korea Institute of Maritime and Fisheries Technology(KIMFT) student group about occupational orientation by utilizing SPSS statistical program. Additionally, the author surveyed the current onboard status of job position of the high school and KIMFT alumni. This study's results and data will be used for aiding further stimulation and advertisement of job position in fishing vessels and continued daily lives on board.

Experimental analysis on the motion response of the small fishing boat toward wave direction (실선 시험에 의한 소성어업의 동요특성)

  • 강일권;윤점동
    • Journal of the Korean Institute of Navigation
    • /
    • v.19 no.1
    • /
    • pp.1-8
    • /
    • 1995
  • The motion of a small boat in seas is affected in relatively higher degrees than the case of a larger ship by the specific characteristics of sea waves, i.e., the wave length and height. Ship's motion caused by sea waves is a matter of special importance to small fishing boats, because they carry out fishing job in rough seas frequently. This is an experimental study on the rolling and pitching motions of full scale ship. In the experiment, the ship's motions were measured for head, how, beam, quarter and following seas. The experiment were carried out on board the training ship Pusan 404(160 GT) in the adjacent waters off NAM HYENG JAE DO on Dec. 13th 1994. The sea condition during the measurements was that wave height 2.5m, no swell and the wind velocity of 12 m/sec. Some statistic considerations were given to the observed data by the series analysis methods and discussed in this paper.

  • PDF

Legal Issues on the Diving Apparatus Fishery: The case of contract responsibility and accountability at the time of ship collision (잠수기 어업과 관련한 법률상의 쟁점 -약정책임과 선박충돌시의 법정책임을 중심으로-)

  • Heo, Gyeom;Shin, Hyeon-Ok;Lim, Seok-Won
    • Journal of Fisheries and Marine Sciences Education
    • /
    • v.26 no.3
    • /
    • pp.647-655
    • /
    • 2014
  • In this research, unlike other fishing, the diving apparatus fishery is that the diver is engaged in fishing for profits. Because it is unique fishery, conflicts can be occurred in members. So, the purpose of this research is to define the contractual relationship between the parties of the diving apparatus fishery. For example, the relationship between the owner and diver and the owner and fishing ship crew. In addition, civil liability of default on the obligation was reviewed. Also, because the trouble was occurred by illegal fishing, criminal liability of ship crash caused by illegal diving apparatus fishery was considered. As a result, It is important to notifying the necessity of some method for the status of diver and fishing ship crew in diving apparatus fishery. moreover, It is need to educate the risk of illegal fishery for the parties of diving apparatus fishery.

Estimation of maneuverability of fisheries training vessel BAEK-KYUNG using numerical simulation method (수치 시뮬레이션 방법을 이용한 어업실습선 백경호의 조종성 추정)

  • KIM, Su-Hyung;LEE, Chun-Ki;LEE, Yoo-Won
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.57 no.3
    • /
    • pp.246-255
    • /
    • 2021
  • Most fishing vessels are less than 100 m in length (LBP), which is not mandatory for the IMO standards for ship maneuverability. Therefore, research on estimating the maneuverability of fishing vessel hull shapes are somewhat lacking compared to that of merchant ship hull shapes, and at the design stage, the numerical simulation method developed for merchant ships are applied without modification to estimate the maneuverability. Since this can cause estimation errors, the authors have derived a modified empirical formula that can improve the accuracy of estimating the maneuverability of fishing vessels in a previous study. In this study, using the modified empirical formula, the IMO maneuverability evaluation items, the turning motion test and Z-test simulations were performed on the fisheries training vessel BAEK-KYUNG and compared with the sea trial test result to verify the validity of the modified empirical formula. In conclusion, the modified empirical formula was able to estimate quantitatively and qualitatively similar to the result of the sea trial test. Such a study on estimating the maneuverability of fishing vessels will be a good indicator for fishing vessel operators and will help them analyze marine accidents.