• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.95-104
• /
• 2014

PURPOSES : The purpose of this study is to evaluate the degree of restraint (DOR) of longitudinal steel at continuously reinforced concrete pavement (CRCP) against environmental loadings. METHODS : To measure the longitudinal steel strain, 3-electrical resistance and self-temperature compensation gauges were installed to CRCP test section (thickness = 250mm, steel ratio = 0.7%) and continuously measured 10 min. intervals during 259 days. In order to properly analyze the steel strains first, temperature compensation process has been conducted. Secondly, measured steel strains were divided into 12 phases with different events such as before paving, during concrete hardening, and after first cracking, etc. RESULTS : Thermal strain rate (TSR) concept is defined as the linear strain variations with temperature changes and restraints rate of longitudinal steel against environmental loadings (especially thermal loading) with different cases is defined as degree of restraint(DOR). New concept of DOR could be indirect indicator of crack width behaviors of CRCP. CONCLUSIONS : Before paving, DOR of longitudinal steel is almost same at the coefficient of thermal expansion of steel ($12.44m/m/^{\circ}C$) because of no restraint boundary condition. After concrete pouring, DOR is gradually changed into -1 due to concrete stiffness developing with hydration. After first cracking at crack induced area, values of DOR are around -3~-5. The negative DOR stands for the crack width behavior instead of steel strain behavior. During winter season, DOR reached to -5.77 as the highest, but spring this values gradually reduced as -1.7 as the lowest. Based on this observation, we can presume crack width decreased over time within the time frame of this study. This finding is not consistent with the current theory on crack width variations over time, so further study is necessary to identify the causes of crack width reducing. One of the reasons could be related to concrete stress re-distribution and stress relaxation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.1
• /
• pp.71-82
• /
• 2017

It is necessary to conduct a detailed geotechnical investigation on the tunnel section in order to secure the tunnel design and construction stability. It is necessary for the importance of geotechnical investigation that needed for the analysis of distribution and size of fractured fault zone and distribution of groundwater in tunnel. However, if it is difficult to perform the ground survey in the tunnel design due to ground condition of the tunnel section and the limited conditions such as civil complaint, the tunnel design is performed using the result of the minimum survey. Therefore, if weathered fault zone exists in the face the reinforcement method is determined in the design process to secure the stability of the tunnel. The most important factor in reinforcing the tunnel excavation surface is to secure the stability of the tunnel by performing quick reinforcement. In particular, if groundwater leaching occurs on the excavation surface, more rapid reinforcement is needed. In this study, fractured fault zone exists on the tunnel excavation surface and displacement occurs due to weathered fracture zone. When the amount of groundwater leaching rapidly increased under the condition of displacement, the behavior of tunnel displacement was analyzed based on tunnel collapse. In the study, reinforcement measures were taken because the first stage displacement did not converge continuously. After the first reinforcement, the displacement was not converged due to increased groundwater leaching and the second stage displacement occurred and chimney collapse occurred.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.3
• /
• pp.35-65
• /
• 1995

The development of Korean shipping industry is maybe defined into three development stages-industry fixing stage, industry coordinating stage, industry development stage-. The development of shipping industry has been depended on the geovernment/authority role such as shipping policy, system, law, rules and regulations. In 1983, Korean shipping industry reorganization and coordination by shipping authority have made our shipping industry on the stable condition together with each company's efforts. Today's world economic environment such WTO/UR negotiation results get this government role limited. According to the being reduced government role, each company's competitive advantage power becomes more important. Besides, korean shipping industry is exposed into the entire and bitter world competition. In order to win and prevent the world shipping competition, it is necessary to look out the competitive advantage power of Korean shipping industry. The first purpose of this study is the situation analysis for competitive advantage power of Korean shipping industry. The second is to compare with our shipping policies with foreign ones concerned with ship, cargo, crew, tax and others. But in order to compare with foreign shipping, this study need their shipping statistics data, this study has some limit of the foreign data. This study has been carried on the basis of the following items. 1. Shipping environment, 2. Ships and ship acquirement(shipbuilding/purchasing), 3. Oceangoing cargo and ship's stowage rate, 4. Human factor in shipping-crew, 5. The incomes and costs in finacial statements. We have some conclusions as following through the this study. First, Korean shipping industry environment-competitive disadvantage situation- has changed rapidly due to the shipping market opening, free market entering of foreign shipping. Second, Korean shipping is disadvantageous due to the high tax rate and financing conditions in connection with ship acquirement. In order to improve the competitive advantage power, the shipping tax system and ship financing conditions should be reviewed to profitable for owners. Third, but both world and Korean oceangoing cargoes quantity have been increased annualy, Korean ship's cargo stowage rate is being decreased. This is serious situation but Korean shipping take well use of foreign vessel with hire. It is recommended to take use of owner's vessel and hired ones in the long range view, considering the world shipping management. But the number of crew has been decreased by 2, 000~3, 000 annualy, it is desirable that the long sea-experienced crew have been increased. Almost of owners usauly complain the crew cost is the main obstacles to competitive advantage power. Human factor is the most important firm's asset. All owners should pay attention to this though, and invest the proper budget to training, education, welfare as much as possible. In the long run this effects could be feedback to owners. Fifth, We must improve the financial statements structure, that is, the first step is to increase income, the second is to decrease cost, the third is to increase income on the same cost, the fourth is to decrease cost on the same income. It is essential to find out what the urgent investment is and what unnecessary cost is. At last, in order to competite world shipping race, each shipping firm must try for himself to retain the power. The government/authority is no longer dependable. I believe that each firm's power will be the industry's power, the industry's power will be the nations's power.

• Journal of the Korean Society of Costume
• /
• v.64 no.6
• /
• pp.33-46
• /
• 2014

The purpose of this study is to present basic data for the standardization of the sizing system for children's wear by investigating the current production and sizing system of Korean children's wear brands. The result of conducting a survey of 20 brands show the following: first, regarding the age bracket of Korean children's wear, it ranged from 3~15 years old. Most of the brands divided up the sizes into 4 or 5 different groups. Second, the utilization of a bodice basic pattern was low during the manufacturing of a pattern, and the basic pattern had been used for the item. Third, the designation of garment sizes were done using height or height-chest measurement or height-waist measurement. Fourth, the brands used the smallest size as the basic size in most cases. Most of the brands had similar deviations for any grading deviations. In conclusion, it appears necessary to restructure the unity of size designation and the sizing system in order to establish the sizing system of children's wear, which features diverse age brackets and various body types.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.576-579
• /
• 1997

In order to repair sewage pipes, it is necessary to dig up the damaged sewage pipes, which results in traffic jams. Since digging up the pipes takes too much time and cost, this method is inefficient. So, in stead of digging up the damaged pipes, a robot is sent down to the pipe to do the repair works. For big pipes, human workers go into the pipe and do to repair works, but for small pipes, it is impossible for human worker to go inside the pipe. In this case, mobile robots have used. The procedures for repairing pipes are as follows : First, the condition of the sewage pipes is observed by a robot. Second, appropriate steps for repair are determined according to the types of the damage. While repairing procedures, a newly-developed packer is sent into the sport to be repaired inside the pipe. Then, the packer is filled with air by a V-shaped wrinkel pipe. This makes the packer inflates uniformly and adhere closely to the inside wall of the pipe in large area. This increases the area that can be repaired. Therefore, the newly-developed packer will be very helpful for sewage pipe repair works.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.2
• /
• pp.146-155
• /
• 1986

Until recently, the calculation of torsional vibration for the marine diesel engine shafting has been performed only for vibratory stresses of resonant points and vibratory stresses for other engine speeds are determined by the estimation. With the advent of energy-saving engines which have a long stroke and a small number of cylinders, the first major critical torsional vibration of the propulsion shaft appears ordinarily near the MCR speed of engine and the flank of its vibratory stress exceeds now and then the limit stress defined by the rules of Classification Society. In order to know the above condition in the design stage of propulsion shafting, it is necessary to calculate the forced torsional vibration with the damping of propulsion shafting for all orders and to synthesize its calculated results according to their phase angles. In this study, the forced torsional vibrations with the damping of propulsion shafting are calculated for several orders by mechanical impedance method, and their results are synthesized. A computer program for above calculations are developed and some test-runs of the developed program are performed for propulsion shaftings of actual ships. The results of calculations are compared with measured values and also with those of the modal analysis method. They show fairly good agreements and the developed program is checked up on its reliability.

• Korean Institute of Interior Design Journal
• /
• no.6
• /
• pp.38-44
• /
• 1995

The purpose of this paper is to show that a shape pro-duced by natural factors such as weather, environments, etc., can be introduced into the emotion of a design, and to make a design process by planning a Korean image and characterizing its concept. Human beings, nature, man-made objects, and society have their own functions in an environmental structure. When all their functions are kept in working order, human beings come to discover orderliness out of which they can absorb pleasure. They cannot look into their own inside but they can trace back in their memories a variety of panoramic experiences which have been embed-ded onto their identity during their lifetime interactions with an empirical world. Children first acquire a way of cognition in the space, a comprehensive premise, connecting a specific place and an object of cognition. Such subconsciousness forms sky-lines of mountains, seas, and trees under the sky, and produces axis lines and beehived domes under the influ-ence of natural, cultural, and social factors, forming a folk culture. A subconscious composition of existential space is extended. A subconscious composition of existential space is extended to the areas of environmental design, product design, and fashion design. The development of a concept of place and space as a system is a necessary condition for discovering an existential foothold.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2055-2058
• /
• 2002

It designs the general description of 8-VSB DTV transmission system will be installed and operated in future on the basis of NTSC TV transmission system in operation now. First of all, it investigates a condition that can maintain optimum received field in case of ground wave broadcasting with analog NTSC and digital 8-VSB DTV. Also it calculates critical value of minimum field strength fur receiving by using field strength calculation method of Longley-Rice. The 8-VSB DTV transmission sets its goal in transmission of data with 19.39Mbps at high speed in order to be available of HDTV in the band of NTSC 6MHz. Accordingly, the optimum of field strength between transmission and receiving points most of all is important problem. So,8-VSB DTV transmission should be enlarged or effective compared with NTSC service coverage. This study is to calculate the transmission power necessary in switching from NTSC VHF to DTV UHF and from NTSC UHF to DTV UHF for maintaining service coverage that NTSC is equal to 8-VSB DTV as a result of calculation.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.202-208
• /
• 2015

In this study, we propose a new inference algorithm for a multiclass Gaussian process classification model using a variational EM framework and the Laplace approximation (LA) technique. This is performed in two steps, called expectation and maximization. First, in the expectation step (E-step), using Bayes' theorem and the LA technique, we derive the approximate posterior distribution of the latent function, indicating the possibility that each observation belongs to a certain class in the Gaussian process classification model. In the maximization step, we compute the maximum likelihood estimators for hyper-parameters of a covariance matrix necessary to define the prior distribution of the latent function by using the posterior distribution derived in the E-step. These steps iteratively repeat until a convergence condition is satisfied. Moreover, we conducted the experiments by using synthetic data and Iris data in order to verify the performance of the proposed algorithm. Experimental results reveal that the proposed algorithm shows good performance on these datasets.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.54-59
• /
• 2010

In order to develop the deep-underground GTX (Great Train eXpress) in domestic, the running performance analysis of the propulsion system by a variety of route condition must be carried out before studying the specification and the development of the high-speed propulsion system with inverter and traction motor. Then it is necessary to study the running resistance properties of the high-speed traction system for the variety of tunnel type and vehicle organization method at first. In addition, the properties of the power requirement of the traction motors needed to maintain the balanced speed of the high-speed traction system are next studied. We need to study properties of the emergency braking distance caused by the highest operation speed of the high-speed traction system and present the fundamental design technologies to develop the high-speed traction system for the deep-underground GTX. Finally, the paper analyzes the applicability of the conventional Korean Tilting Train eXpress (TTX) propulsion system on the high-speed propulsion system for the deep-underground GTX.