• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.847-854
• /
• 1999

In this paper, we have analysed frequency-dispersion characteristics of higher-order modes for uniform planar transmission lines, using the 2-dimensional finite-difference time-domain method. The method presented in this paper uses both informations of amplitude and phase of the electromagnetic spectrum to determine resonant frequencies, while methods previously reported use the magnitude only. This algorithm is very useful when a resonant mode has a relatively small magnitude, where the identification of the resonant mode is quite difficult. Numerical results show that a strip line supports few higher-order modes within the frequency range of 20 GHz, but there occur many higher-order modes in the structure of grounded coplanar waveguide, where resonant frequencies of the first higher-order mode is very close to those of the fundamental mode and there occur lots of very adjacent higher-order modes. As in this example, for the analysis of planar transmission lines which support many resonant modes very close each other, the method presented in this paper can be applied very efficiently.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2017

The characteristics of the rock cleavage in Jurassic Geochang granite were analysed using the distribution of microcrack lengths and spacings. The phases of distribution of the above lengths and spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. First, the length and spacing-cumulative diagrams for the six directions of rock cleavages were arranged in increasing order($H2{\rightarrow}R1$) on the density(${\rho}$) of microcrack length. The various parameters were extracted through the combination of the above two types of diagrams. The discrimination factors representing the three quarrying planes and three rock cleavages were acquired through the mutual contrast between the values of parameters. The analysis results of the research are summarized as follows. The evaluation for the six directions of rock cleavages was performed using the parameters such as (1) intersection angle(${\alpha}-{\beta}$) and (2) exponent difference(${\lambda}_S-{\lambda}_L$) between two exponential straight lines related to spacing(${\alpha}$, ${\lambda}_S$) and length(${\beta}$, ${\lambda}_L$). The values of parameters(1 and 2) are in order of H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2). On the contrary, the values of the above two parameters for three planes are in order of R < G < H. Meanwhile, the direction of convergence between two exponential straight lines was derived. The above direction is compliant to arrangement of the line os' centering around the line ol. The above two lines converge in the direction of the Y-axis when the line ol and line os' occupy the upper region on the left and the lower region on the right, respectively(R-type). On the contrary, the above two lines converge in the direction of the X-axis when the order of arrangement between line ol and line os' is reversed(H-type). Especially, the positive(+) or negative(-) value of intersection angle(${\alpha}-{\beta}$) is determined by the arrangement of two vertical lines. This type of correlation analysis is useful for evaluating the relative strength of rock cleavage and discriminating three quarrying planes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.4
• /
• pp.513-521
• /
• 2019

The purpose of this research is to find out the preference of users on the characteristics of the subway sign blank. In detail, The purpose is to introduce the concept of designing various characteristics of the subway sign blank according to characteristics such as gender and age, etc. The methodology of this study is to investigate the preference of the characteristics of the characteristics of the subway sign blank space and analyze the preference of the whole group and the cluster group. A survey was conducted to investigate preferences. A cluster analysis was conducted to analyze the preferences. And a demographic and conjoint analysis was conducted for whole group and the cluster group. The attributes of the subway sign blank space for preference survey are as follow : top and bottom blank, side blank, border line blank, arrow thickness, 'station name' and 'line number' order. The results of the preference analysis are as follows. The importance of the attributes in the whole group is shown in the order of the border line blank, 'station name' and 'line number' blank, side blank, top and bottom blank, and arrow thickness. The cluster group is composed of 3 groups, 1 cluster is a woman who uses the subway almost every day, three to four times a week, and seems to prefer half the side blank. 2 crowd is the user who thinks that 60 or more subway signs are uncomfortable, and preferring the order of 'station name' + 'line number' order without border. The 3 clusters were men in their 20s and 30s, with a preference for 1/5 border line blank and thin arrow thickness. The conclusion is as follows. First, the characteristics of the subway sign blank must be designed consistently. However, it is necessary to consider various factors according to gender, age, and frequency of subway use for specific regions or routes. Secondly, It has been shown that, depending on the specific area or route, it is possible to design two or more types of design, not one type of standardized marking of the characteristics of the subway sign blank.

• Journal of Plant Biotechnology
• /
• v.4 no.3
• /
• pp.129-134
• /
• 2002

We report the development of a new selection system for the transformation of pepper plants by mannose. In order to achieve this, we first tested several factors related to regeneration conditions. Among the 30 inbred lines examined, line P9l5 was able to generate shoots at the highest rate from both cotyledons and hyporotyls in MS media. A dosage curve for optimizing the selection conditions was established by mixing mannose (range 0-50 g/L) and sucrose (range 0-30 g/L). The least selection pressure on shoot formation was created by a mixture of sucrose and mannose at 20 g/L and 15 g/L, respectively, and the threshold for ultimate tissue death was 50 g/L of mannose irrespective of the sucrose concentration. However, we found that mannose itself was not the sole inhibitor of pepper shoot development. High concentrations of sucrose (30 g/L) contributed additively to the inhibition of shoot formation at higher mannose concentrations. Genotype preference is a major factor that enhances regeneration ability in mannose media, as was observed in MS media. P9l5 and P410 line had high regeneration rates under mannose selection conditions in the presence of Agrobacterium infection. Different virulence levels of Agrobacterium strains did change the regeneration rates, probably due to interaction with the specificities of the inbred lines. Taken together, P9l5 offers the best pepper inbred line for transformation and we recommend a selection condition of 20 g/L of sucrose and 15 g/L or more of mannose up to 50 g/L in media.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.9
• /
• pp.53-62
• /
• 2013

This paper proposes a method of automatically predicting the vanishing point for the purpose of detecting the road region from natural images. The proposed method stably detects the vanishing point in the road environment by analyzing the dominant orientation of the image and predicting the vanishing point to be at the position where the feature components of the image are concentrated. For this purpose, in the first stage, the image is partitioned into sub-blocks, an edge sample is selected randomly from within the sub-block, and RANSAC is applied for line fitting in order to analyze the dominant orientation of each sub-block. Once the dominant orientation has been detected for all blocks, we proceed to the second stage and randomly select line samples and apply RANSAC to perform the fitting of the intersection point, then measure the cost of the intersection model arising from each line and we predict the vanishing point to be located at the average point, based on the intersection point model with the highest cost. Lastly, quantitative and qualitative analyses are performed to verify the performance in various situations and prove the efficiency of the proposed algorithm for detecting the vanishing point.

• Journal of the Korean Society of Costume
• /
• v.50
• /
• pp.5-22
• /
• 2000

The study on the past costume should be done first for the creation of new style of fashion. That is one of the reasons why we have to annalize characteristic style in each period. Before the latter of nineteenth century one must have made the costume by draping design. Because the complicated clothes can be expressed by draping deign think that the subject draping design is even more important than other subject. But there haven't been the studies that analyzed the pattern of Art Nouveau style by draping design in Korea. Art Nouveau style is a certain one that was relatively more changeable than the ones of other periods. The purpose of this study is the analysis about the patterns of hourglass and S-curve style which represented the Art Nouveau style. The results of the study summarized as follows. 1. Bodice pattern : In the front Hourglass silhouette has the princess line for fitting bodice while S-curve silhouette has the wide midriff due to the blousing. There is the yoke in S-curve one. In the pattern of back bodice we can't see the much differences but Hourglass silhouette is used the princess line like the front one while S-curve is made use of the waist darts for fitting back. 2. Sleeve pattern : Hourglass silhouette is made of two pieces the upper part and lower part besides S-curve is consisted of one pieces. The former has the big upper part in order to the emphasis of the shoulder and the tight lower part. The latter is the tight sleeve that similar to the basic sleeve pattern at present. 3. Skirt pattern: There is partially a gored line in the front skirt in Hourglass silhouette however S-curve silhouette is consisted of the six pieces gored skirt. At this part we can also see the fact that s-curve is more complicated than Hourglass silhouette. 4. Others: Wecan find out the differences between Hourglass and S-curve pattern easily at the parts of the collar flounce wing and so on. Summing up, the patterns of S-curve style are more expanded than those of Hourgalss style for the most part.

• Journal of the Korean Society of Costume
• /
• v.50
• /
• pp.129-144
• /
• 2000

In the history of the costume of Western Europe one of the most interesting apects is that the silhouette of women's dress has been continuously evolved. There can be various origins in this changing silhouette but the most important origin is that clothes of any period are the reflection of the architectural political religious and economic background against which they are worn they must also be djusted to the texture and design of the materials produced at the time and of course there is always the basic instinct of sex attraction. The changing line in men's and women's clothes has been demanded by each period but man's great active life did not required the development of exaggerated line which could restrict his movements. Exaggeration in men's clothes has usually been confined to accessories only details could be simplified or abandoned altogether in time of action. However Woman has no great concern in these restrivtions and when an era demanded an exaggerated silhouette she developed it to the utmost limit with out any hesitation plunged herself into whalebone cane and steel for the desired line and then later to adapt herself to a changing world just as without any hesitaion abandoned all these artificial props. In this study first of all the origin of the corset and the evolution of silhouette will be chronologically studied and rearranged on the basis of written materials such as text books theses and catalogs which are related to corset In this section the most important backgrounds-social religious and economic-which caused the chages of silhouette will be scrutinized in a time order. Then the shapes and functions of corsets will be looked into in a more detailed way. In addition the materials and decorations which were preferred to achieve the desired silhouette will be examined. Finally underwear which was and has been worn for cleanness protection the shapes of outer clothes and erotic mood will be studied.

• Journal of the Korean Society of Costume
• /
• v.66 no.3
• /
• pp.121-134
• /
• 2016

The purpose of this study is to explore the effectiveness of marketing strategies of children's clothing line for global SPA brands among Korean consumers. The following factors were evaluated as the dependent variables: benefits sought, store attributes, and brand loyalty. We employed a survey method to test our research questions. The subjects of our survey were mothers with preschool kids between 2 and 7 years who had purchase experiences of children's clothing lines of global SPA brands. The major findings are as follows: First, among the three factors of benefits sought ('trend'/'brand value'/'practicality'), the 'trend' factor only positively impacted the 'product' factor, which is part of the store attributes. 'Practicality' and 'trend' factors had a positive effect on the 'service' factor of store attributes. However, all three factors of benefits sought had no impact on the 'store' factor, and 'practicality' and 'trend' factors had positive effects on the price factor of store attributes. Second, 'practicality' and 'trend' factors among the three factors of benefits sought, had positive effects on brand loyalty. Third, the 'product', 'price', 'store', and 'service' factors had a significant positive effect on brand loyalty in decreasing order. Suggestions from our results for national SPA brands are as follows: National SPA children's clothing lines should focus more on unique designs and unique marketing strategies better reflecting Korean consumers' interest and needs in competing with their global counterparts.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.4
• /
• pp.29-39
• /
• 2011

The purpose of this study provides a high consumer-oriented wedding dress on the consumer and offering the consumer-oriented product and provide a basis data to develop a wedding shops so it can stable and manage of effective marketing. Wedding shop for a survey of consumer preference, and based on this wedding dress designed and made. The results are summarized as follows. First, when wearing wedding dresses and "graceful and feminine" image that seek to pursue an image that showed the highest response, "simple and stylish", "cute and vivid" image was in order. In the survey of wedding dress preference, lace is preferred, in tone of color white is preferred by and large. In silhouette, A-line is preferred most, in neckline, exposure of the shoulder, in sleeve length, sleeveless, in decoration, beads. Second, on the basis of these results, depending on the image to pursue the design, wedding was made of 3 creations. The work I is a target of the early 20s, the concept "simple and stylish", and A-line is adopted in silhouette focusing on modern simplicity, soft satin material used of high class. The work II is a target of the late 20s, the concept "cut and vivid", and fit-and-flare made of many folded tulle mesh material. The work ill is a target of the 30s overall, the concept "graceful and feminine", and high-waist- empire-line is adopted in silhouette, splendid lace material used, is of the gorgeous and mature beauty.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.852-857
• /
• 2011

In this paper, the application of a variable characteristic impedance transmission line that can be used to design a dual-band bandpass filter(BPF) is presented. The proposed filter offers a fixed first frequency passband and a controllable second passband. The tuning of the second passband is achieved by varying the characteristic impedance of and open shunt stub line in a stub loaded resonator(SLR) with the help of a defected ground structure(DGS) transmission line and varactor diodes. In order to validate the proposed structure, a two stage dual-band BPF with three transmission zeros was implemeted and experimentally verified based on its theoretical predictions and simulations.