• 한국환경농학회지
• /
• 제35권2호
• /
• pp.128-136
• /
• 2016

BACKGROUND: Hydrothermal carbonization reaction is the thermo-chemical energy conversion technology for producing the solid fuel of high carbon density from organic wastes. The hydrothermal carbonization reaction is accompanied by the thermal hydrolysis reaction which converse particulate organic matters to soluble forms (hydro-thermal hydrolysate). Recently, hydrothermal carbonization is adopted as a pre-treatment technology to improve anaerobic digestion efficiency. This research was carried out to assess the effects of hydro-thermal reaction temperature on the methane potential and anaerobic biodegradability in the thermal hydrolysate of organic sludge generating from the wastewater treatment plant of poultry slaughterhouse .METHODS AND RESULTS: Wastewater treatment sludge cake of poultry slaughterhouse was treated in the different hydro-thermal reaction temperature of 170, 180, 190, 200, and 220℃. Theoretical and experimental methane potential for each hydro-thermal hydrolysate were measured. Then, the organic substance fractions of hydro-thermal hydrolysate were characterized by the optimization of the parallel first order kinetics model. The increase of hydro-thermal reaction temperature from 170℃ to 220℃ caused the enhancement of hydrolysis efficiency. And the methane potential showed the maximum value of 0.381 Nm³ kg^-1-VS_added in the hydro-thermal reaction temperature of 190℃. Biodegradable volatile solid(VSB) content have accounted for 66.41% in 170℃, 72.70% in 180℃, 79.78% in 190℃, 67.05% in 200℃, and 70.31% in 220℃, respectively. The persistent VS content increased with hydro-thermal reaction temperature, which occupied 0.18% for 170℃, 2.96% for 180℃, 6.32% for 190℃, 17.52% for 200℃, and 20.55% for 220℃.CONCLUSION: Biodegradable volatile solid showed the highest amount in the hydro-thermal reaction temperature of 190℃, and then, the optimum hydro-thermal reaction temperature for organic sludge was assessed as 190℃ in the aspect of the methane production. The rise of hydro-thermal reaction temperature caused increase of persistent organic matter content.

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.408-414
• /
• 1987

The rate of bromine-exchange reaction between antimony tribromide and ${\alpha}-phenyl-n-butyl$ bromide in nitrobenzene has been determined, using antimony tribromide labelled with Br-82. The results indicate that the exchange reaction follows the first-order kinetics with respect to the organic bromide, and either the second- or first-order kinetics with respect to antimony tribromide depending on its concentration. The third-order rate constant obtained was 7.50 ${\times}10^{-2}l^2mol^{-2}s^{-1}$ at 28$^{\circ}$C. Similar study on the bromine-exchange reaction between antimony tribromide and ${\alpha}$-phenyl-i-butyl bromide has also been carried out. The results of the study show the same kinetic orders as the ones observed with $\alpha$-phenyl-n-butyl bromide. The third-order rate constant observed was 2.40 ${\times} 10^{-2} l^2mol^{-2}s^{-1}$ at 28$^{\circ}$C. The activation energy, the enthalpy of activation and the entropy of activation for the two exchange reactions mentioned above have been determined. The reaction mechanisms for the exchange reactions are discussed.

• Environmental Engineering Research
• /
• 제16권2호
• /
• pp.55-60
• /
• 2011

The removal of hexavalent chromium from aqueous solutions onto modified holly sawdust was studied at varying initial hexavalent chromium concentrations, adsorbent doses, pHs and contact times. The removal of hexavalent chromium from aqueous solutions increased with increasing adsorbent dosage and contact time. The percentage of hexavalent chromium removed from the aqueous solutions decreased with increasing hexavalent chromium concentration and pH of the solution. The kinetics of the adsorption of hexavalent chromium onto modified holly sawdust was analyzed using pseudo first-order and pseudo second-order models. The pseudo second-order model described the kinetics of adsorption of hexavalent chromium. The Langmuir and Freundlich isotherm models were used for modeling of the adsorption equilibrium data. The Langmuir isotherm model well described the equilibrium data for the removal of hexavalent chromium by modified holly sawdust. The obtained maximum adsorption capacity was 18.86 mg/g at pH 7. The results showed that modified holly sawdust can be used as a low cost adsorbent for the treatment of aqueous solutions containing chromium.

• 대한가정학회지
• /
• 제11권1호
• /
• pp.44-56
• /
• 1973

The effect of the temperature and the time of scalding, and the addition of various seasoning on the remaining % of total Vitamin C contained in Spinach (Spinacia oleracea) was studied and discussed by means of chemical kinetics. The quantitative measurements of total Vitamin C were made by 2,4-dinitrophenyl hydrazine (DNPH) method with Clinical Electrophotometer (Fisher). The sample spinach contains 39.88mg. % of total vitamin C on the average, and the ratio of oxidized and reduced forms of Vitamin C is 1 : 4.7. When the sample spinach was scalded, the kinetics of the decrease of the remaining total vitamin C. % was observed to follow the first order reactions regardless of the temperatures applied (i,e. 70$^{o}$ , 80$^{o}$ , 90$^{o}$ and 100$^{o}$ ) with half-life range of 2.10 - 1.47 minutes. In the case of the addition of various seasonings, the addition of various seasonings, the kinetics remaining Vitamin C % showed to be the zero order reactions regardless of the kinds of seasonings and storage temperatures. With the addition of seasonings, the stability of Vitamin C was found to be increased in the order table salt+sesame oil+vinegar+soybean sauce, without seasoning, table salt+sesame oil, table salt+sesame oil+soybean sauce.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.40-45
• /
• 2007

Methylene blue(MB) was photocatalytically degraded with one-body photoanode and solar simulator to investigate the possible application to both environmental purification and photoelectrochemical cell for hydrogen production. Photoactive titanium dioxide was formed on both sides of Ti plate following steps such as rinsing-annealing-calcination or anodizing(20 V, 30 V)-annealing($350^{\circ}C$, $450^{\circ}C)$ after etching. The prepared titania plate($2cm{\times}2\;cm$, ca 1.6 mg $TiO_2$ on the basis of $1\;{\mu}m$ thickness) was used to degrade MB(10 ppm in 200 mL solution). The reaction tended to follow the Langmuir-Hinshelwood kinetics with zero order. Comparative experiments with Degussa P25 showed the same zero order kinetics when 2 mg of P25 had been used, while the first order kinetics when 200 mg used. This concludes the feasibility of the prepared titania plate as a material for the purification of low-level harmful organics and an electrode or a membrane for photoelectrochemical system for hydrogen production.

• Korean Chemical Engineering Research
• /
• 제58권1호
• /
• pp.127-134
• /
• 2020

상용흡착제 실로퓨트에 의한 Taxus chinensis 유래 주요 타르 성분인 아세나프텐의 흡착 특성을 조사하였다. 초기 아세나프텐 농도, 흡착 온도 및 시간에 따른 흡착 데이터를 Langmuir, Freundlich, Temkin 및 Dubinin-Radushkevich 등온흡착식에 적용한 결과, Langmuir 등온흡착식이 가장 적합하였다. 동역학적 흡착 데이터는 유사 이차 속도식에 가장 잘 따름을 알 수 있었다. 열역학적 파라미터로부터 흡착 공정이 적합하며 비자발적 발열이었다. 등량흡착열은 흡착량에 의존하지 않아 실로퓨트의 표면에너지가 균일함을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.243-245
• /
• 2013

Rate equations are exactly solved for the reversible consecutive reaction of the first-order and the time-dependence of concentrations is analytically determined for species in the reaction. With the assumption of pseudo first-order reaction, the calculation applies and determines the concentration of product accurately and explicitly as a function of time in the unimolecular decomposition of Lindemann and in the enzyme catalysis of Michaelis-Menten whose rate laws have been approximated in terms of reactant concentrations by the steady-state approximation.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.929-934
• /
• 2011

The adsorption kinetic study of ruthenium complex, N3, onto nanoporous titanium dioxide ($TiO_2$) photoanodes has been carried out by measuring dye uptake in-situ. Three simplified kinetic models including a pseudo first-order equation, pseudo second-order equation and intraparticle diffusion equation were chosen to follow the adsorption process. Kinetic parameters, rate constant, equilibrium adsorption capacities and related coefficient coefficients for each kinetic model were calculated and discussed. It was shown that the adsorption kinetics of N3 dye molecules onto porous $TiO_2$ obeys pseudo second-order kinetics with chemisorption being the rate determining step. Additionally the heterogeneous surface and the pore size distribution of porous $TiO_2$ adsorbents were also discussed.

• Bulletin of the Korean Chemical Society
• /
• 제18권11호
• /
• pp.1199-1203
• /
• 1997

The investigation of cure kinetics of biphenyl epoxy (4,4-diglycidyloxy-3,3,5,5-tetramethyl biphenyl)-xylok resin system with four different catalysts was performed by differential scanning calorimeter using an isothermal approach. All kinetic parameters of the curing reaction including the reaction order, activation energy and rate constant were calculated and reported. The results indicate that the curing reaction of the formulations using triphenylphosphine (TPP) and 1-benzyl-2-methylimidazole (1B2MI) as a catalyst proceeds through a first order kinetic mechanism, whereas that of the formulations using diazabicyloundecene (DBU) and tetraphenyl phosphonium tetraphenyl borate (TPP-TPB) proceeds by an autocatalytic kinetic mechanism. To describe the cure reaction in the latter stage, we have used the semiempirical relationship proposed by Chern and Poehlein. By combining an nth order kinetic model or an autocatalytic model with a diffusion factor, it is possible to predict the cure kinetics of each catalytic system over the whole range of conversion.

• 생태와환경
• /
• 제39권4호통권118호
• /
• pp.450-461
• /
• 2006

본 연구에서는 pH 5.5에서 연안퇴적물내 납과 카드뮴의 흡착 동력학을 실험실규모의 회분식 반응기를 이용하여 조사하였다. 4종류의 모델: 단일영역 물질전달모델 (one-site mass transfer model, OSMTM), 겉보기 1차속도모델 (pseudo-first-order kinetic model, PFOKM), 겉보기 2차속도모델 (pseudo-second-order kinetic model, PSOKM)과 두영역 1차속도모델 (two compartment first-order kinetic model, TCFOKM)을 사용하여 흡착속도를 분석하였다. 관련된 모델매개변수의 수에서 기대되듯이 변수가 3개인 TCFOKM이 변수가 2개인 OSMTM, PFOKM, PSOKM 보다 흡착속도를 더 잘 표현할 수 있었다. 납과 카드뮴의 대부분의 흡착은 초기 3시간 이내에 빠르게 완료되었으며, 이후 기간 동안은 느린 흡착이 이루어졌다. 모든 모델에서 겉보기 흡착평형농도($q_{e,s}$)는 퇴적물의 양이온 교환능 (CEC)과 표면적이 증가함에 따라 증가하는 것으로 예측되었으며, 이는 초기 중금속 투여 농도와 중금속 및 퇴적물의 형태와 무관하였다. OSMTM에서의 흡착속도 상수 ($k_s,\;hr^{-1}$)는 퇴적물의 CEC와 표면적이 증가함에 따라 증가하였다. PFOKM의 겉보기 1차흡착속도상수 ($k_{p1,s},\;hr^{-1}$)는 퇴적물의 특성과 관련이 없었다. PSOM 분석결과 겉보기 2차흡착속도상수 ($k_{p2,s},\;g\;mmol^{-1}\;hr^{-1}$)와 초기흡착속도 ($v_{o,s},\;mg\;g^{-1}\;hr^{-1}$)는 퇴적물의 특성과 연관되지 않았다. TCFOKM의 빠른 흡착영역의 분율($f_{1,s}$)은 수용액상의 초기농도와는 무관하게 퇴적물의 CEC와 표면적이 증가함에 따라 증가하였다. 빠른 부분에서의 흡착속도 상수 ($k_{1,s}=10^{0.1}-10^{1.0}\;hr^{-1}$)는 느린 부분에서의 흡착속도 상수 ($k_{2,s}=10^{-2}-10^{-4}\;hr^{-1}$)보다 훨씬 더 큰 것으로 나타났다.