• 한국화재소방학회논문지
• /
• 제32권4호
• /
• pp.50-59
• /
• 2018

고령화 추세에 따라 최근 급속히 증가하고 있는 노인복지시설에서 화재가 빈번하게 발생하고 있으나, 거주하고 있는 와상노인에 대한 피난안전성이 확보되어 있지 않아 대규모 인명피해를 초래하고 있다. 이런 시설에 거주하는 와상노인에 대한 피난안전성의 실효성을 제고하기 위한 방법의 일환으로 비화재구역의 피난허용시간을 최대한 연장시키면서 발코니 등의 일시피난안전구역에 차례로 피난시키고, 소방기관에 통보하는 화재속보설비를 통해 소방대의 출동에 의한 외부 조력피난유도방법이 최선의 대책인 것으로 판명되었다. 따라서 이와 같은 조력피난을 수행하는데 있어 반드시 적용해야할 요소기술을 방화 소방공학적으로 개발하여 4가지로 분류 제시하였다. 방화공학적 요소기술로는 구조 구획의 내화성능확보와 구획의 소규모화 규제 조항과 마감재의 난연 불연성능의 확보 규제 조항인 2가지를 제시하였다. 또한 소방공학적 요소기술로는 스프링클러에 의한 냉각효과 부과 규제 조항과 소방기관으로의 자동화재속보기능의 부여 규제 조항인 2가지를 제시하였다. 제시된 규제 조항에 대하여 일본과 국내의 법조문을 상세히 비교분석하여 국내에서 개정한 법조문상 미흡한 부분을 고찰하고, 국내의 노인복지시설의 피난안전성의 제고를 위해 시급하게 개선되어야 할 안전기준 개정(안)을 제시하였다.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.11-16
• /
• 2019

The four different polymer compounds were manufactured with the two kinds of plasticizers [(di-2-ethylhexyl sebacate(DOS), and di-2-butyl sebacate(DBS)] and two different additive amounts(18, 26 phr) of the same plasticizer for making cable sheath for ship. Ethylene-vinylacetate, ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinylacetate grafted maleic anhydride as coupling agent were selected for compounding with fire retardant, closslinking agent, filler, and other additives besides plasticizer. The compound including DOS showed the higher ${\Delta}T$ than that including DBS at the same additive amount in the rheology test. And with increasing plasticizer, the compounds resulted in lower tensile strength and higher elongation by lubricating effect of plasticizer. DOS yielded better aging resistance and cold resistance than DBS due to the good heat resistance and low solidifying point of DOS compared to DBS.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.551-561
• /
• 2022

In this paper, the effect of fire conditions according to ISO 834 standard on the behavior of carbon fibre-reinforced plastic (CFRP) reinforced steel beams coated with gypsum-based mortar has been investigated numerically. To study the efficiency of these beams, 3D coupled temperature-displacement finite element analyzes have been conducted. Mechanical and thermal characteristics of three different parts of composite beams, i.e., steel, CFRP plate, and fireproof coating, were considered as a function of temperature. The interaction between steel and CFRP plate has been simulated employing the adhesion model. The effect of temperature, CFRP plate reinforcement, and the fireproof coating thickness on the deformation of the beams have been analyzed. The results showed that within the first 120 min of fire exposure, increasing the thickness of the fireproof coating from 1 mm to 10 mm reduced the maximum temperature of the outer surface of the steel beam from 380℃ to 270℃. This increase in the thickness of the fireproof layer decreased the rate of growth in the temperature of the steel beam by approximately 30%. Besides excellent thermal resistance and gypsum-based mortar, the studied fireproof coating method could provide better fire resistance for steel structures and thus can be applied to building materials.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.39-45
• /
• 1995

The plywoods commonly used as decorative interior materials for the construction are inflammable and so it is a causative factor for making fire accidents, resulting in the destruction of human life and personal properties. Indeed, it is, therefore, required to produce fire-retardant plywoods. In this study, a special grade of defect-free, Kapur plywood was used. Specimens were cut into 3- by 20cm dimensions from 120- by 240- by 0.33-cm panels(thin panel) or 120- by 240- by 0.5-cm panels(thick panel). Some specimens were treated with diammonium phosphate(DAP), but some were not treated with diammonium phosphate to use as control panels. Chemical absorption, drying curves, drying rates and dynamic Young's modulus were investigated. The results were summaries as follows; 1. The specimens were soaked into 19% diammonium phosphate solution by a full cell pressure process and the diammonium phosphate retained in the thin and thick plywoods was 1.409kg/$(30cm)^3$, 1.487kg/$(30cm)^3$, respectively. 2. Diammonium phosphate-treated plywoods were redried with press-drying process at one of either condition dried on the platen($115^{\circ}C$) for a period of time or dried on the platen($50^{\circ}C$) for 3 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. or dried on the platen($60^{\circ}C$) for 2 hrs plus in a dry-oven($30^{\circ}C$) for 24 hrs. The drying rate of treated thin specimens dried at $60^{\circ}C$ plus $30^{\circ}C$ and $115^{\circ}C$ only was found to be 0.04 %/min. and 8.53 %/min. Similarly, the drying rate of treated thick specimens were 0.03 %/min. and 6.77 %/min. respectively. 3. It was evident that highly-significantly different drying rate of treated plywoods was observed between plywood thicknesses and platen temperatures and the rate was increased by elevating the platen temperature up to $115^{\circ}C$. Based on the two-way variance analysis, highly significant drying rate was observed from the interaction between plywood thicknesses and platen temperatures. 4. After redrying, the specimens were weighed and reconditioned to a constant weight in a facility maintained temperature ($20^{\circ}C$) and relative humidity(65%) prior to test dynamic Young's modulus. The test revealed that the thin specimens dried at the platen temperature of $50^{\circ}C$, $60^{\circ}C$, $115^{\circ}C$ and untreated specimens showed 1.070E+09 dyne/$cm^2$, 1.156E+09 dyne/$cm^2$, 1.243E+09 dyne/$cm^2$, and 1.052E+09 dyne/$cm^2$, respectively. Likewise, the thick specimens revealed 5.647E+09 dyne/$cm^2$ 5.670E+09 dyne/$cm^2$, 6.395E+09 dyne/$cm^2$ and 5.415E+09 dyne/$cm^2$, respectively. 5. It was evident that significantly different dynamic Young's modulus was observed between the plywood thickness and the platen temperature, but not in the two-way interaction between the plywood thickness${\times}$the platen temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.251-254
• /
• 2001

In this paper, we analyzed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC 600[V] wire. Messurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflaming pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds genalated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of $2.5{\pm}0.04[w/cm^{2}]$ for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 25.2 to 37.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomplete combustion of FR-PVC which has high content of carbon in compound.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2001

In this paper, we analysed the properties change of electric wire when the thermal stress was applied to NFR-8 and FR-PVC [600] wire. Measurement is made of the attenuation of a light beam by smoke accumulating with in a closed chamber due to nonflamining pyrolytic decomposition and flaming combustion. Results are expressed in terms of specific optical density which is derived from a geometrical factor and the measured optical density a measurement characteristic of the concentration of smoke. Referenced documents were ASTM E662 standard test method for specific Ds generated by solid materials. The furnace control system shall maintain the required irradiance level under steady-state condition with the chamber door closed of 2.5${\pm}$0.04[w/$\textrm{cm}^2$] for 20 min. According to the results of the smoke density analysis of NFR-8 and FR-PVC the highest decomposition flaming smoke density range of NFR-8 and FR-PVC were 7.2 to 77.5 and 51.1 respectively. Nonflaming smoke density range of NFR-8 and FR-PVC were 100.4 to 112.2 and 126.5 to 398.8. The amount of carbon monoxide generated was found to be much higher in FR-PVC decomposition than in NFR-8 due to incomp1ete combustion of FR-PVC which has high content of carbon in compound.

• 한국산림과학회지
• /
• 제98권3호
• /
• pp.319-323
• /
• 2009

건자재로서 나무 결함중의 하나는 그의 가연성이다. 본 연구의 목적은 한국에서 자란 리기다 소나무와 밤나무의 연소성질을 시험하는 것과 건자재로서의 사용에 대한 바람직한 특성을 알아내는 것이다. 콘칼로리미터(ISO 5660-1)는 열방출율과 CO, $CO_2$ 발생과 연기차폐와 같은 연기지수를 측정하는 데 이용되어 졌다. $50kW/m^2$의 열속하에서 밤나무의 평균열방출율은 소나무의 평균열방출율 $150.77kW/m^2$ 과 비교하여 $160.7kW/m^2$ 을 나타내었다. 밤나무는 소나무에 비해 숯생성으로 인한 증대된 난연성을 보였다. 밤나무는 소나무에 비하여 높은 CO 수율과 높은 CO/$CO_2$ 수율을 나타내었다.

• 공업화학
• /
• 제22권4호
• /
• pp.439-443
• /
• 2011

수산화마그네슘이 첨가된 저밀도 폴리에틸렌-에틸렌 비닐 아세테이트 혼합물의 연소성을 시험하였다. 저밀도 폴리에틸렌-에틸렌 비닐 아세테이트에 수산화마그네슘을 40~80 wt% 첨가하여 용융 혼합하고 성형 후 콘칼로리미터(ISO 5660-1)를 이용하여 그의 연소성을 시험하였다. 수산화마그네슘을 첨가한 시험편은 첨가하지 않은 시험편에 비하여 그의 연소성이 감소하였다. 이것은 순수한 저밀도 폴리에틸렌-에틸렌 비닐 아세테이트에 첨가한 수산화마그네슘의 흡열 분해 때문에 연소 억제성이 향상된 것으로 생각된다. 수산화마그네슘을 첨가한 시험편은 첨가하지 않은 시험편에 비해 낮은 최대열방출률과 낮은 유효연소열을 나타내었고, 수산화마그네슘 함량이 증가할수록 착화시간은 길어지고, 최대열방출률은 감소하였다.

• 한국주거학회논문집
• /
• 제25권2호
• /
• pp.19-26
• /
• 2014

The number of elderly who wants to access to Nursing Homes (NH) will increase due to the rapid aging society and domestic changes. Those who move into NH expect 24/7 care service in safe environment. Providing space free from danger, especially from fall, for the frail elderly is essential. The purpose of this study is to categorize performance needs of flooring materials in the aspect of safety, and analyze materials so that adequate ones for each space in NH can be suggested. Performance needs are as follows; slip resistance (dry/wet), fire resistance, resilience, water resistance, soil retardant, anti-bacterial, gloss, sound absorbtion. maintenance, durability, ease replacement, color and pattern variety, visual and tactual texture, tactile warmth, IAQ, sustainable material (before use), impact to nature (after use). They are categorized under function, economy, sensibility and sustainability. It was found that there are better materials than common ones that has been used repeatedly in NHs, such as vinyl sheets and VCT. In overall, Cork flooring and nylon carpet met all four categories, followed by wool carpet, rubber and linoleum. For bedroom, wood flooring, Cork, rubber, wool carpet, nylon carpets were suggested. In bathroom with shower, rubber, vinyl sheet and porcelain tiles were safe materials. As living/dining room and corridor floors, wool carpet, nylon carpet, cork flooring would be excellent as they are resilient and durable. The result of this paper can be used by both NH managers and material companies, resulting better quality of life of the elderly by providing safe environment.

• Journal of the Korean Wood Science and Technology
• /
• 제40권1호
• /
• pp.19-25
• /
• 2012

본 연구에서는 대나무숯의 인테리어용 건축자재로의 이용을 위하여 대나무숯 성형보드를 개발코자 하였다. 대나무숯 성형보드의 난연성능 확보를 위해 대나무숯과 발포질석 및 무기계 바인더를 혼합, 성형하여 제조하였다. 초기 열류량 50 kW/$m^2$의 조건에서 콘칼로리미터에 의한 대나무숯 성형보드의 연소시험이 수행되었다. 중량 감소율, 총열방출량, 최대열방출률의 연소거동을 관찰하기 위하여 3종의 건축재료(합판, 일본산 죽탄보드, 석고보드)를 사용하였으며, 표면시험 및 가스유해성을 조사하였다. 대나무숯 성형보드의 중량감소율은 연소 10분후 12.0%로 불연성 석고보드의 중량감소율(15.6%)보다 작았다. 연소 개시 5분 시점에서 대나무숯 성형보드의 총열방출률은 3 MJ/$m^2$, (KS 기준 8 MJ/$m^2$ 이하)이며, 최대열방출률은 20 kW/$m^2$ (KS 기준 200 kW/$m^2$ 이하)를 나타내어 난연3급의 건축재료에 해당되었다. 연소에 따른 외관상 변형과 방출가스에 의한 마우스 유해성은 나타나지 않았다.