• 제목/요약/키워드: fire resistant materials

검색결과 83건 처리시간 0.023초

커튼월 층간 화재확산방지구조 적용을 위한 경량무기발포 세라믹보드의 부착강도 (Bond Strength of Light-weight Inorganic Ceramic Board for Fire Resistant Curtain-wall System)

  • 신현욱;송훈;추용식;이종규
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 춘계 학술논문 발표대회
    • /
    • pp.214-215
    • /
    • 2014
  • Technologies on energy saving and materials used in curtain walls have progressed with increase of high-rise and large buildings. This study is explain fire resistance performance of the curtain walls. And focused on bond strength of light-weight inorganic ceramic board in high temperature for fire resistant curtain-wall system. From the result, curtain-wall system high fire resistant using the light-weight inorganic ceramic board.

  • PDF

내화강재의 고온특성 데이터베이스 구축 연구 (Experimental Study on Making Databases for Fire Resistant Steel at High Temperature)

  • 권인규
    • 한국화재소방학회논문지
    • /
    • 제27권5호
    • /
    • pp.1-7
    • /
    • 2013
  • 가연물의 증가는 건축물 화재의 발생 위험성과 재해발생 규모를 점차적으로 증대시키는 요인이 되고 있다. 따라서 강구조 건축물의 화재에 대비한 기술개발이 요구되었으며, 이 결과로 내화강재가 개발되었다. 본 연구에서는 FR 490강재의 고온 시 기계적, 열적 특성을 실험적으로 평가하고, 이 결과를 상온 시 구조적 내력이 동일한 용접구조용 강재인 SM 490과 상호 비교함으로써 고온 시의 내력유지 성능이 우수함을 확인하였다.

Synthesizing and Assessing Fire-Resistant Geopolymer from Rejected Fly Ash

  • An, Eung-Mo;Cho, Young-Hoon;Chon, Chul-Min;Lee, Dong-Gyu;Lee, Sujeong
    • 한국세라믹학회지
    • /
    • 제52권4호
    • /
    • pp.253-263
    • /
    • 2015
  • Ordinary Portland cement is a widely favored construction material because of its good strength and durability and its reasonable price; however, spalling behaviour during fire exposure can be a serious risk that can lead to strength degradation or collapse of a building. Geopolymers, which can be synthesized by mixing aluminosilicate source materials such as metakaolin and fly ash, and alkali activators, are resistant to fire. Because the chemical composition of geopolymers controls the properties of the geopolyers, geopolymers with various Si:Al ratios were synthesized and evaluated as fire resistant construction materials. Rejected fly ash generated from a power plant was quantitatively analyzed and mixed with alkali activators to produce geopolymers having Si:Al ratios of 1.5, 2.0, and 3.5. Compressive strength of the geopolymers was measured at 28 days before and after heating at $900^{\circ}C$. Geopolymers having an Si:Al ratio of 1.5 presented the best fire resistance, with a 44% increase of strength from 29 MPa to 41 MPa after heating. This material also showed the least expansion-shrinkage characteristics. Geopolymer mortar developed no spalling and presented more than a 2 h fire resistance rating at $1,050^{\circ}C$ during the fire testing, with a cold side temperature of $74^{\circ}C$. Geopolymers have high potential as a fire resistant construction material in terms of their increased strength after exposure to fire.

화재피해를 입은 철근콘크리트 단주시험체의 보수재료 적용 후 내화성능 평가 (Fire Resistant Performance after Application of Repaired Materials for Fire-Damaged Reinforced Concrete Column)

  • 심상락;류동우
    • 대한건축학회논문집:구조계
    • /
    • 제36권5호
    • /
    • pp.147-154
    • /
    • 2020
  • Currently, there are no specific repair methods for RC structures damaged by fire, and repair methods are applied when durability deteriorates due to aging. In addition, a number of recent studies have been reported that have conducted fire resistance assessment of the repair materials themselves, assuming exposure to high-temperature environments such as fires. However, researches that evaluate the fire resistance performance of the repair materials by applying existing repair materials to the actual fire damaged reinforced concrete structures are very rare. Therefore, in this study, a number of existing repair materials were applied to fire-damaged concrete column to compare and evaluate the fire resistance performance with the original cover concrete.

동일 내화뿜칠 피복조건에서 표준화재에 노출된 합성보의 강재 온도이력 및 단면형상계수와의 관계 (A Study on Relations between Shape Factor and Temperature History of Steel of Composit Beam in Standard Fire under Same Thickness Condition of Spray-type Fire Resistant Materials)

  • 여인환;조경숙;조범연
    • 한국화재소방학회논문지
    • /
    • 제26권6호
    • /
    • pp.72-77
    • /
    • 2012
  • 콘크리트-강재 합성보가 고온에 노출된 경우 콘크리트는 강재를 피복하여 온도상승을 지연시키거나 보 내부의 수열용량을 높이는 역할을 한다. 한편 재료 간 일체화로 부재의 강도가 보완되기 때문에 일반적으로 단순 강재 보 보다 합성보의 내화성능이 유리하게 나타난다. 합성보에서 외부에 노출된 강재의 온도상승은 부재 단면의 형상 및 강재의 노출정도와 직접 관련하게 된다. 본 연구에서는 합성보와 일반철골보에 내화인정을 받은 내화뿜칠재를 동일 두께로 피복하여 표준화재조건의 내화실험을 실시하고, 그 결과로 나타난 강재의 온도이력과 단면형상계수와의 관계를 비교 분석하였다. 강재 온도 측정결과와 부재별 단면형상계수의 상관관계를 살펴본 결과 상관성이 매우 높은 것으로 나타났다. 이 결과는 부재의 내화성능에 영향을 미치는 명확한 조건에 의해 비교우위의 성능예측이 가능한 경우 부재별 개별 인정 없이 표준구조 인정을 통한 보편적인 사용이 가능할 수 있음을 시사한다.

건축물 지하 구조부재의 내화성능 개선에 관한 연구 (Survey of Building Structural Elements located at Underground for Improvement of Fire Resistant Performance)

  • 권인규
    • 한국화재소방학회논문지
    • /
    • 제22권4호
    • /
    • pp.76-84
    • /
    • 2008
  • 건축물의 지상층 주요구조부인 기둥, 보 및 바닥에 대한 내화성능의 연구는 활발하게 진행되고 있으나, 모든 구조적 하중을 지반으로 전달하는 지하층의 기둥을 비롯한 주요 구조부의 내화성능에 관한 자료 및 연구는 거의 없는 실정이다. 개구부율이 낮은 지하층에서의 화재크기는 지상층 화재보다 열에너지량이 크므로 구조적 붕괴의 위험성은 높다. 따라서 본 논문에서는 지하에 위치된 구조부재에 대한 내화성능의 적정성 평가를 위한 기본 자료 제공을 목적으로 국내외 지하 구조물의 내화법규정을 조사하고, 국내의 기시공된 건축물의 지하층의 구조형식, 구조재료 및 내화피복 현황을 분석하였다.

화재사례 및 재현실험을 통한 온도조절장치 고장 및 오동작으로 인한 전자제품 화재 메커니즘 분석 (A Study on the Analysis of Fire Mechanisms in Electronic Products due to Failure and Malfunction of Thermostats Through Fire Cases and Reproduction Experiments)

  • 이정일;임종화
    • 대한안전경영과학회지
    • /
    • 제26권1호
    • /
    • pp.31-38
    • /
    • 2024
  • In this paper, as there are many cases of fires occurring due to the failure or inoperability of the thermostat of electronic products, the purpose is to test and analyze the risks and probabilities through fire cases and reproduction experiments, and suggest countermeasures. Among electronic products, water purifiers are composed of a refrigerant system with a compressor to make cold water, a heating device to make hot water, and an electric device used as an energy source. Due to the nature of the water purifier manufacturing, these devices are subject to a lot of moisture and dust. etc. exist in large quantities and use electrical energy, so there is a possibility of fire due to short circuit in the wire, electrical abnormal overheating (tracking phenomenon) in the thermostat, electronic board, starting relay, etc., and overheating of the heating device (Band Heater). there is. Therefore, in order to prevent fires from these devices, a system to remove foreign substances inside the water purifier is necessary, the use of heat-resistant (fire-resistant) wires for electrical devices is essential, and the use of non-combustible materials (semi-combustible materials) for each part is necessary to prevent fire. The risk must be eliminated through prevention and combustion expansion prevention devices.

국내 현장방염 시공의 실태분석 연구 (A Study on the On-site Flame Resistant Treatment in Domestic)

  • 김황진;이성은;오규형
    • 한국화재소방학회논문지
    • /
    • 제25권2호
    • /
    • pp.33-38
    • /
    • 2011
  • 본 연구는 초기 착화지연으로 화재예방에 중요한 역할을 담당하는 방염처리제도에 대한 실태 분석연구로서 현장에서 발생하는 여러 문제점들을 각 시도 소방공무원과 방염업자들과의 회의 및 시공현장 방문을 통해 분석하였다. 분석결과 첫 째, 수요가 작은 시장에서 너무 많은 업체들이 경쟁을 하고 있고 이로 인해 방염에 대한 전문성이 없는 일부 업자들은 원가절감을 위해 부실시공을 하는 등의 문제가 발생하고 있으며 둘 째, 현재 실시되고 있는 현장방염처리 검사제도는 검사자가 현장에서 직접 성능검사를 실시하지 못하고 시공자가 제출한 샘플로 방염성능검사를 실시하기 때문에 시료채취의 문제점과 제출된 시료의 신뢰성 및 현장의 방염성능 확보에 의문을 갖는 등의 문제가 발생하고 있다.

내화용 고강도 습식 스프레이 폴리머 모르타르의 화재 저항성 평가 (Evaluation of Wet-Mixed High Strength Sprayed Polymer Mortar for Fire Resistance)

  • 원종필;최석원;박찬기;박해균
    • 콘크리트학회논문집
    • /
    • 제18권4호
    • /
    • pp.559-568
    • /
    • 2006
  • 본 연구의 목적은 화재에 의하여 붕괴 위험성이 있는 터널콘크리트 구조물을 보호하기 위해서 사용하는 습식 고강도 폴리머 스프레이 모르타르의 역학적 특성과 화재저항성을 평가하는 것이다. 본 연구의 주요 목적은 낮은 강도를 가지고 있어 내화재료로서 충분하지 않은 현재 사용되고 있는 재료의 단점을 극복하기 위하여 강도와 화재저항성을 동시에 증가시키는 것이다. 또한 습식 고강도 폴리머 스프레이 모르타르의 피복두께에 따른 내부온도분포를 평가하였으며 화재가 발생하였을 경우 터널콘크리트 구조물을 보호할 수 있는 습식 고강도 폴리머 스프레이 모르타르의 최적두께를 결정하였다. 본 연구의 결과 습식 고강도 폴리머 스프레이 모르타르는 현재 상용화되어 있는 내화용 재료와 비교하여 강도가 높았으며, 우수한 내화성능을 확보하였다. 무엇보다도 화재로부터 기존 구조물을 보호하기 위한 고강도 폴리머 모르타르의 최적 피복두께는 4cm이상 이었다.

내화충전구조 인정제도의 성능기준 및 등급분류 개선에 관한 연구 (A Study on the Improvement of Performance Standard and Classification for the Firestop Accreditation System)

  • 이형도;최윤정;안재홍;정아영;서희원;박진오
    • 한국안전학회지
    • /
    • 제35권4호
    • /
    • pp.32-39
    • /
    • 2020
  • The fire compartments with fire-resistant construction are installed in the principal structural parts of a building in order to reduce damage in the event of a building fire. As a fire may spread through a crack in the fire compartment, the firestop with secured performance is used according to the procedure, methods, and standards specified in the detailed operation guideline. According to the current detailed operation guideline, vertical members (wall penetration) and horizontal members (floor penetration) are classified into different categories respective to each other for the classification of the firestop. Therefore, an accreditation applicant must apply for the performance test for each structure even if the wall and the floor have the same structure. Also, Grade T is used for the firestop that penetrates the fire compartment. However, in the case of foreign countries, the use of Grade F for the firestop is allowed even if it penetrates the fire compartment. The result of the precedent studies also showed that there was a significantly low possibility of fire to spread even if Grade F was applied for a metallic duct that penetrated the fire compartment. In this study, the improved scheme for the classification and performance standard of firestops was presented by analyzing the results of precedent studies regarding the firestop and domestic and overseas firestop qualification systems.