• 한국건설순환자원학회논문집
• /
• 제5권2호
• /
• pp.83-90
• /
• 2010

As a reinforced fabric, asbestos has been utilized as a fire-resistant material as it has a superior flexural stiffness and heat resistance up to $1500^{\circ}C$. However, due to its harmfulness, its use has been prohibited recently and the even the installed asbestos materials are being repaired or supplemented if there is a concern about flying. Asbestos is mainly used for construction panels as a reinforced fabric and coating materials to ensure the fire-resistance of steel frames. Asbestos was used as fire-resistant materials for steel frames until 1991 and then prohibited as Act on Industrial Safety and Health limits the concentration of asbestos in the air. Classified as a designated waste according to Act on Waste Control, asbestos must be buried if there is no possibility of flying (panel-type materials) or cement-solidified and then buried if there is a possibility of flying (spray coating material) In general, it is required that a new waste landfill include a certain landfill facility for designated waste, but in reality there is an absolute storage of landfill facilities for designated waste as they only install facilities of the size required by the regulations. This could result in the 2nd environmental pollution as they cannot process asbestos wastes which will be generated in large volume in the future. This study explores a method that melts asbestos wastes at $700^{\circ}C$ rather than cement-solidifying the waste asbestos from construction sites, especially asbestos-containing spray coating. The study results showed that there was no change in the composition and shape even though asbestos wastes was melted at $1300^{\circ}C$, but there was a change for the specimen which was process in advance for low temperature melting and then melt at $900^{\circ}C$.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.149-150
• /
• 2018

Recently, a large fire has occurred through a dry bit, which is a flammable exterior material, in Daebong Green Apartment Fire in Uijeongbu in 2015 and Jecheon Sports Center Fire in 2017. In this study, KS F ISO 5660-1 Cone calorimeter experiment was used to examine the fire risk of dry bit. Also, the performance of the repair and reinforcement materials to prevent fire expansion was examined. As a result, the dry bit is likely to be ignited by internal and external flower gardens, and its combustion rate and calorific value are very high. In addition, the performance of heat resistance such as ALC panel and ceramic board as a repair and reinforcement material has been proved. However, the insulation is expected to require further consideration.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.54-60
• /
• 2001

This study is to investigate the mechanical properties and the fatigue crack propagation of fire resistance steel for frame structure as the chemical composition was changed by addition of N, B and rolled end temperature was varied. We used two kinds of specimen, the one is parallel and the other is perpendicular to the rolling directions. As rolled end temperature increased, volume fraction of ferrite and pearlite decreased, but volume fraction of baintie and grain size increased. Micro-hardness decreased as rolled end temperature increased, but tensile and yield strength increased. Volume fraction of ferrite and pearlite decreased by addition of N. But volume fraction of bainite, tensile and yield strength increased. Microstructure was changed to martensite by addition of B, and tensile and yield strength increased. Fatigue life of TL direction specimen was shorter than that of LT direction specimen. There was no significant effect to fatigue crack propagation rate by addition of N and changing rolling condition, but fatigue life was increased by addition of B.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.51-56
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in tensile test of high strength fire resistance steel for frame structure with time frequency analysis methods. The results obtained are summaries as follows ; In the T and TN specimen consisting of ferrite and pearlite grains, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$ - 10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point the second is after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min specimens, many signals were observed from area before yield point and counts were decreased after yield point.

• 한국화재소방학회논문지
• /
• 제16권1호
• /
• pp.18-23
• /
• 2002

저독성 폴리올레핀 절연재료, Sheath재료의 저독성, 연기밀도특성, 연소가스부식성 분석을 하기 위하여 저독성 내화케이블의 성능평가 시험을 수행하였다. 화재 발생시 화염확산 및 유독성가스발생의 주원인으로 피난안전계획에 매우 중요하다. 90년대 후반기부터 연이어 발생한 씨랜드 화재사고와 인천 인현동 라이브클럽등의 동일한 유형을 가진 화재사건을 계기로 국내 내화케이블에 사용되는 재료가 화재시 인명참사에 미치는 영향이 크다는 점이 발견되었다. 본 연구에서는 고체물질에서 발생하는 연기의 특성광학밀도를 ASTM E662를 근거로 하여 실험을 하였다. 전기로의 시스템은 20분동안 밀폐된 챔버내에서 2.5$\pm$0.04w/$\textrm{cm}^2$을 지닌 조사열량을 일정한 상태 하에서 방사를 유지할 수 있도록 하였다. NFR-8과 FR-PVC 연기밀도의 분해 결과에 따라 완전연소에 의한 연기밀도 최대값 NFR-8은 25.2에서 39.6 FR-PVC에서 51.1의 값을 얻을 수 있었다. 비연소 열분해에 의한 연기밀도 최대값 NFR-8은 100.4에서 112.2 FR-PVC는 126.5에서 398.8의 값을 얻을 수 있었다. 또한 시료의 연기밀도 분석결과 PVC가 폴리올핀 시료보다 상당히 많은 양의 CO가 발생되는 반면 $CO_24의 양은 적게 발생하였다.

• 한국지반공학회논문집
• /
• 제23권11호
• /
• pp.87-98
• /
• 2007

화재 후 터널 구조물의 신속한 복구를 위하여 화재손상 구간을 정확하고 빠르게 파악하는 것이 무엇보다도 중요하다고 할 수 있다. 본 연구에서는 화재로 인한 라이닝 콘크리트의 역학적 특성 변과를 라이닝의 두께방향으로 연속적으로 측정하기 위한 천공저항시험법을 제안하고, 천공시험으로부터 측정된 천공 변수들로부터 모르타르와 콘크리트의 역학적 특성을 추정하고자 하였다. 비교적 균질한 모르타르에 대하여 일련의 천공저항시험을 실시한 결과, 분당회전수가 1,300rpm, 관입속도가 1.40mm/sec, 그리고 비트직경이 10mm인 경우에 측정된 천공 반력값의 편차가 가장 작게 나타나 최적의 시험조건으로 판별할 수 있었다. 최적 시험조건에서 모르타르에 대해 천공저항시험을 실시한 결과, 천공반력과 모르타트의 압축강도 및 탄성계수 사이의 결정계수가 각각 0.91 및 0.93으로 나타나 양호한 상관관계를 도출할 수 있었다. 또한 콘크리트에 존재하는 골재의 영향을 고려하기 위하여 반력 에너지 개념을 제시하였고 실제 압축강도와의 결정계수는 0.94로서 역시 양호한 상관관계를 도출할 수 있었다. 이상과 같이 천공 비트의 관입과 동시에 연속적으로 재료의 역학적 특성을 추정할 수 있는 천공저항시험의 적용 가능성을 파악할 수 있었다.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.79-85
• /
• 2015

Onboard fire extinguishing system is important to protect cargo and human lives and every oil tanker has foam type fire extinguishing system. Because of environmental problem, agent which contains materials such as Perfluorinated compounds are regulated and the development of the environmental friendly agent is required. The protein foam has less environmental pollution problem and has an excellent fire extinguish performance to oil fire. In the research, bivalency metal salts were added as stabilizer to increase fire resistance and stability of the foam. Ferrous sulfate, Iron chloride and Nickel chloride were used and to adjust to vessel, sea water was applied. As a stabilizer increased, the expansion ratio was raised. However 25% drainage time was decreased over 2.0 wt.% which is knowable that the foam brokes easily. The amount of generated foam was measured to check fluidity of foam and it appeared that when $FeSO_4$ 1.2 wt.% was added, the amount of generated foam reached large and also the 25% drainage time was high. To evaluate the fire extinguishing performance for oil fire, the small scale oil fire test was executed. When $FeSO_4$ 1.2 wt.% was added, fire extinguishing time was in its shortest which informs fluidity of foam and stability are important factors on fire extinguishing efficiency.

• 설비공학논문집
• /
• 제19권7호
• /
• pp.512-520
• /
• 2007

The design of a ground-source heat pump system includes specifications for a ground loop heat exchanger where the heat transfer rate depends on the effective thermal conductivity of the ground and the effective thermal resistance of the borehole. To evaluate these heat transfer properties, in-situ thermal response tests on four vertical test boreholes with different grouting materials were conducted by adding a monitored amount of heat to circulating water. The line-source method is applied to the temperature rise in an in-situ test and extended to also give an estimate of borehole effective thermal resistance. The effect of increasing thermal conductivity of the grouting materials from 0.818 to $1.104W/m^{\circ}C$ resulted in overall increases in effective thermal conductivity by 15.8 to 56.3% and reductions in effective thermal resistance by 13.0 to 31.1%.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.11-16
• /
• 2019

The four different polymer compounds were manufactured with the two kinds of plasticizers [(di-2-ethylhexyl sebacate(DOS), and di-2-butyl sebacate(DBS)] and two different additive amounts(18, 26 phr) of the same plasticizer for making cable sheath for ship. Ethylene-vinylacetate, ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinylacetate grafted maleic anhydride as coupling agent were selected for compounding with fire retardant, closslinking agent, filler, and other additives besides plasticizer. The compound including DOS showed the higher ${\Delta}T$ than that including DBS at the same additive amount in the rheology test. And with increasing plasticizer, the compounds resulted in lower tensile strength and higher elongation by lubricating effect of plasticizer. DOS yielded better aging resistance and cold resistance than DBS due to the good heat resistance and low solidifying point of DOS compared to DBS.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.214-215
• /
• 2014

Technologies on energy saving and materials used in curtain walls have progressed with increase of high-rise and large buildings. This study is explain fire resistance performance of the curtain walls. And focused on bond strength of light-weight inorganic ceramic board in high temperature for fire resistant curtain-wall system. From the result, curtain-wall system high fire resistant using the light-weight inorganic ceramic board.