• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.198-207
• /
• 2008

The conventional Residual Current Protective Devices(RCD, or earth leakage circuit breaker, ELB) operates depending on the total leakage current which is the vector-sum of resistive and capacitive components of a leakage current. However, the electric disaster such as electric shock or fire is mainly caused by the resistive component. Therefore, in this view point, the RCD is more realistic when it operates by the resistive component of the leakage current. In this paper, a new algorithm for measuring the resistive leakage current from the total leakage current is suggested, and is realized to an actual circuit. According to the suggested algorithm, the resistive component of the leakage current can be found by integrating the total leakage current over only a half cycle of the line voltage, and it is realized by using analog switches and resettable integrators. It is confirmed through experiments that the suggested algorithm detects, within maximum average error of 6.74%, the resistive leakage current from the total leakage current, and the RCD employing the suggested algorithm brakes the circuit within the regular interrupt time(30msec).

• The Journal of Korean Medicine
• /
• v.24 no.2
• /
• pp.19-31
• /
• 2003

Objectives : This study examined effects of kyeong points (經穴)' acupuncture of three hand yang collaterals (手三陽經) on the facial thermography in health subjects, because the kyeong point in Yang collaterals belongs to the characteristic of the five elements (五行)meaning fire (火). Methods : The volunteers who participating in this study rested for 20-30 min. atroom temperature (23-$25^{\circ}C$) before the examination and were informed to avoid smoking, drinking and use of any drugsfor the previous day. The thermography of the face was taken using Infra-Red Imaging System (IR 2000, MEDI-CORE Co., Korea) at time intervals of 15 minutes : at 15 min before, just before and after, 15 min after, 30 min after and 45 min after acupuncture stimulation. Acupuncture was applied to the left kyeong points (經穴)' of three hand yang collaterals (手三陽經) for 30 minutes. Results : The results showed that kyeong points (經穴)' acupuncture of three hand yang collaterals (手三陽經) decreased the temperature of all the areas of the facial surface comparing to those of the control group. Also, it was observed that the quantities of thermal changes following acupuncture of ST36 increased in the all ROIs (regions of interest) compared to those of the control group. Conclusions : Observing the thermography classified by ROI, it was clear that acupuncture of kyeong points (經穴) of three hand yang collaterals (手三陽經) could modulate thermogram of the facial area however, it is necessary to undertake more investigation supporting these results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.364.2-364.2
• /
• 2014

Magnesium oxide (MgO) thin films have attracted great scientific and technological interest in recent decades. Because of its distinguished properties such as a wide band gap (7.2 eV), a low dielectric constant (9.8), a low refractive index, an excellent chemical, and thermal stability (melting point=$2900^{\circ}C$), it is widely used as inorganic material in diverse areas such as fire resistant construction materials, optical materials, protective layers in plasma display panels, buffer layers of multilayer electronic/photonic devices, and perovskite ferroelectric thin films. Precursor used in the ALD requires volatility, stability, and low deposition temperature. Precursors using a heteroleptic ligands with different reactivity have advantage of selective reaction of the heteroleptic ligands on substrate during ALD process. In this study, we have synethesized new heteroleptic magnesium precursors ${\beta}$-diketonate and aminoalkoxide which have been widely used for the development of precursor because of the excellent volatility, chelating effects by increasing the coordination number of the metal, and advantages to synthesize a single precursor. A newly-synthesized Mg(II) precursor was adopted for growing MgO thin films using ALD.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.132-137
• /
• 2002

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. The life of transformer is significantly dependent on the thermal behavior in windings. To analyse winding temperature rise, many transformer designer have calculated temperature distribution and hot spot point by finite element method(FEM). Recently, numerical analyses of transformer are studied for optimum design, that is electric field analysis, magnetic field, potential vibration, thermal distribution and thermal stress. In this paper, the temperature distribution of 50 kVA pole mold transformer for power distribution are investigated by FEM program and the temperature rise test of designed mold transformer carried out and test result is analyzed compare to simulation data. In this result, the designed mold transformer is satisfied to limit value of temperature and the other property is good such as voltage ratio, winding resistance, no-load loss, load loss, impedance voltage and percent regulation.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.187-194
• /
• 2008

LiDAR는 일반 항공사진 및 위성영상과는 달리 사물의 높이를 측정할 수 있어 산림의 3차원 모델링을 수행할 수 있다. 본 연구에서는 이러한 LiDAR의 특성을 이용하여 산불이 발생한 강원도 양양지역 산림의 물리적 피해를 분석하였으며, 디지털 항공사진으로부터 Normalized Difference Vegetation Index (NDVI)를 추출하여 산림의 생물학적 피해를 분석하였다. 산림의 물리적 피해는 임관의 피해정도에 따라 지표면에서 반사되는 Point Data의 개수의 비율로서 추정을 하였다. 피해정도의 고저(高低)를 구분하는 기준은 통계적 방법 (Jenk's Natural Break) 으로부터 추정된 0.3594을 사용하였으며, 지표면 반사비율이 0.3594 이상인 경우 물리적 피해정도를 고(高, Serious Physical Damage; SPD), 지표면 반사비율이 0.3594 이하인 경우 물리적 피해정도를 저(低, Light Physical Damage; LPD)로 나타내었다. 또한 생물학적 피해는 일반적인 NDVI 값의 범위(-1

• Korean Journal of Acupuncture
• /
• v.22 no.3
• /
• pp.175-197
• /
• 2005

Objective : The purpose of this study is to review the acupuncture therapy and moxibustion on itching Method : We searched and reviewed chinese journals of and books of the acupuncture therapy and moxibustion on itching. Results & Conclusions : 1. Dermatopathy of itching is described as eczema, neurotic-dermititis, itching in orient medical text. 2. According to text, itching causes were wind symptom produced by deficiency of blood, deficiency syndrom of the spleen, and damp-heat. 3. Frequently used acupoints were LI10(41 frequency), SP10(29), ST36(27), SP6(22), GB20(19), Asi point(18), BL(17), back Su acupoints(13), LI4(13), SP9(10), PC6(7), HT7(7). etc 4. The practice of acupuncture was used by body acupuncture, auriculo-theraphy, loss of bleeding with needle, blum-blosson needle, dermal needle, fire needle. etc. 5. Moxibustions are mild moxibustion, non-scar producing moxibustion, herb- moxibustion. etc.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.5
• /
• pp.299-304
• /
• 2018

An ideal circuit breaker should supply electric power to loads without losses in a conduction state and completely isolate the load from the power source by providing insulation strength in a break state. Fault current is relatively easy to break in an Alternating Current (AC) circuit breaker because the AC current becomes zero at every half cycle. However, fault current in DC circuit breaker (DCCB) should be reduced by generating a high arc voltage at the breaker contact point. Large fire may occur if the DCCB does not take sufficient arc voltage and allows the continuous flow of the arc fault current with high temperature. A semiconductor circuit breaker with a power electronic device has many advantages. These advantages include quick breaking time, lack of arc generation, and lower noise than mechanical circuit breakers. However, a large load capacity cannot be applied because of large conduction loss. An extinguishing technology of DCCB with polymeric positive temperature coefficient (PPTC) device is proposed and evaluated through experiments in this study to take advantage of low conduction loss of mechanical circuit breaker and arcless breaking characteristic of semiconductor devices.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.11
• /
• pp.361-368
• /
• 2015

In AAGFCS the effective range is regarded as a range for the bullet's speed exceeding the speed of sound to damage the stationary target. Hence the real engagement range might be extended over the effective range for the approaching target since bullet's relative speed to the target increases depending on the approaching speed. However previous TOF equations have good computation accuracy within the effective range only, and they can not be used above that range due to their bad accuracy. We propose an accurate TOF computation method which can be used both within and above the effective range in real time. Some simulation results are shown to demonstrate usefulness of our algorithm for the 30mm projectile.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.465-470
• /
• 2008

우리나라는 산림은 단순림이 많고 밀도가 높기 때문에 산불이 한번 발생하면 대형 산불로 확산될 우려가 크다. 이 때문에 산불 발생을 미리 예측하여 대응할 필요가 있다. 산불 발생예측을 위해서는 산불 발생에 영향을 미치는 인자와 산불 발생의 관계를 파악하는 것이 중요하다. 본 연구는 1997년부터 2006년까지 발생한 전국에서 발생한 산불의 point data를 이용하였다. 산불 발생 지점의 지형인자와 지리인자, 그리고 산불 발생 당시의 기상인자로 DB를 구축하고 산불 발생과의 관계를 구명하였다. 지형인자 분석은 고도, 방위, 경사에 따른 산불 발생 빈도를 분석하였고, 그 상관관계를 분석하였다. 지리인자 분석에서는 인구밀도, 산불 발생지역의 접근성(도로에 따른 접근성, 대도시와의 거리에 따른 접근성)에 대한 산불 발생의 상관관계를 분석하였다. 기상인자와 산불 발생의 관계는 전국 76개소에서 관측된 온습도 데이터를 보간한 자료와 산불 발생과의 관계를 분석하였다. 기상인자 분석은 산불이 가장 빈번하게 발생하는 3월 하순, 4월 초순, 4월 중순 자료를 평균하여 산불 발생 빈도와의 상관관계를 분석하고 산불 발생 위험지역을 도출하였다. 본 연구를 통해서 각 인자와 산불 발생의 관계를 분석해보았다. 하지만 각 인자간의 관계를 분석하지 못한 것이 한계점이라고 할 수 있다. 차후 연구에서는 각 인자간의 관련성을 분석하고 산불 발생의 원인과 인자간의 구체적인 인과관계를 밝히는 것도 필요할 것으로 보인다.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1298-1303
• /
• 2004

The characteristics of soot near the soot inception point for an ethene-air flame was carried out in a WSR (well-stirred reactor). The new sampling tool like the temperature controlled filter system was introduced to minimize the condensation during sampling. The new analysis tools applied include the real time size distribution analysis with the Nano-DMA, particle size by transmission electron microscopy, C/H analysis, g filter analysis, and thermogravimetric analysis using both non-oxidative and oxidative pyrolysis. The WSR can generate young soot particles that can be collected and examined to gain insight into inception. For the current conditions, soot does not form for ${\Phi}=1.9$, inception occurs at or before ${\Phi}=2.0$, and inception combined with soot surface growth and/or coagulation occurs for ${\Phi=2.1}$. The filter samples for ${\Phi}$=1.9 are composed of volatile compounds that evolve at relatively low temperatures when heated in the presence or absence of $O_2$. The samples collected from the WSR at ${\Phi}=2.0$ and ${\Phi}=2.1$ are precursor-like in morphology and size. They have higher C/H ratios and lower organic percentages than precursor particles, but they are clearly not fully carbonized soot. The WSR PAH distribution is similar to that in young soot from inverse flames.