• 전기화학회지
• /
• 제8권2호
• /
• pp.99-105
• /
• 2005

본 연구에서는 정전위 전해중합법으로 음이온 크기가 다른 도펀트를 사용하여 폴리피를 전극을 제조하였으며, CV 및 교류 임피던스법을 이용한 전기화학적 분석 및 형태학적 분석을 통해 제조된 폴리피롤 전극의 특성을 고찰하였다. 제조된 전극을 전기화학적으로 분석한 결과 $PPy/CLO_4$전극은 음이온의 도핑$\cdot$탈도핑이, PPy/PVS 전극은 양이온의 탈도핑$\cdot$도핑이 일어나고 있음을 알았다. 합성 전위가 증가할수록 $PPy/CLO_4$ 전극과 PPy/PVS 전극 모두 전하전달저항은 감소하였고, 이중층 용량은 $PPy/CLO_4$전극이 PPy/PVS 보다 큼을 알 수 있었다. 합성 전위 변화에 따른 PPy/PVS 전극 표면의 변화는 상대적으로 $PPy/CLO_4$ 보다 작음을 알 수 있었다

• 한국전자파학회논문지
• /
• 제24권7호
• /
• pp.737-747
• /
• 2013

개발된 3차원 탐색 레이더는 저속으로 기동 중인 작은 RCS(Radar Cross Section)를 갖는 다수의 표적을 TWS(Track While Scan) 방식을 활용하여 실시간으로 탐지, 추적하여 표적의 거리, 속도, 각도 정보를 추출하는 펄스도플러(pulsed-doppler) 방식의 레이더이다. 본 논문에서는 고속으로 기동하는 표적을 탐지하기 위한 일반적인 레이더 신호처리 기법과 비교하여 영속도 근처의 저속 표적을 탐지하기 위한 속도 채널 처리 및 클러터맵 생성기법, 생성된 클러터맵을 활용하여 표적 정보를 획득하기 위한 신호처리 기법을 기술하며, 고속 다중 DSP가 탑재된 상용(COTS: Commercial Off-The-Shelf) 보드를 활용하여 개발된 3차원 탐색 레이더용 실시간 신호처리기의 HW/SW 구조 설계 및 탑재 알고리즘, 시험 결과 등을 제시한다.

• 대한의용생체공학회:의공학회지
• /
• 제25권6호
• /
• pp.623-628
• /
• 2004

본 논문에서는 원적외선 온열효과가 자율 신경계에 미치는 영향을 심박변동(HRV)을 이용하여 평가 하였다. 측정된 심박변동신호를 FFT 의한 전력스펙트럼을 구함으로써 자율 신경계의 반응 특성을 고찰하고 Poincare plot 분석 방법을 이용하여 결과를 비교 분석하였다. 실험을 통해 심박변동 신호분석해보면 원적외선 온열에 노출되기 전에 비해 노출된 후에 매우 복잡한 모습임을 관찰 할 수 있었는데 이것은 자율신경계가 관여하는 심혈관계 제어 메커니즘이 원적외선 온열에 노출되기 전보다 노출된 후에 더욱 복잡함을 반영하는 것으로 분석된다.

• 대한치과보철학회지
• /
• 제44권1호
• /
• pp.73-84
• /
• 2006

The importance of soft tissue response to implant abutments has become one of the major issues in current implant dentistry. To date, numerous studies have emphasized on maintaining connective tissue barriers in quantity, as well as in quality fir the long term success of dental implants. The cells mainly consisting the soft tissue around dental implants are fibroblasts and epithelial cells. The mechanism of the fibroblasts adhesions to certain substrata can be explained by the 'focal adhesion' theory. On the other hand, epithelial cells adhere tn the substratum via hemidesmosomes. The typical integrin-mediated adhesions of cells to certain matrix are called 'cell-matrix adhsions'. The focal adhesion complex of fibroblasts, in relation to the cell-matrix adhsions, consists of the extracellular matrix(ECM) such as fibronectin, the transmembrane proteins such as integrins, the intracellular cytoplasmic proteins such as vinculin, talin, and more, and the cytoskeletal structures such as filamentous actin and microtubules. The mechanosensory function of integrins and focal adhesion complexes are considered to play a major role in the cells adhesion, migration, proliferation, differentiation, division, and even apoptosis. The '3-D matrix adhesions' defined by Cukierman et al. makes a promising future for the verification of the actual process of the cell-matrix adhesions in vivo and can be applied to the field of implant dentistry in relation to obtaining strong soft tissue attachment to the implant abutments.

• 한국가구학회지
• /
• 제28권2호
• /
• pp.111-117
• /
• 2017

Recently, as people's interest in wood has increased, the use of wood as household and landscape decking materials has increased. As the deck material, imported wood such as synthetic wood, Ipe, and Malas was used in addition to the existing preserved wood, but recently deck use has been activated as part of the activation of domestic materials. As an important quality factor in the selection of such decking materials, various durability along with weatherability for long - term use is required for maintenance. Generally used tropical hardwoods have excellent weatherability and durability without additional preservative treatment. However, the domestic larch is a wood species with a higher specific gravity and durability than ordinary conifers. However, it has not yet been used as a deck material due to lack of comparative studies on its characteristics. Therefore, hardness and durability of wood were measured using six specimens of Ipe, Massaranduba, Malas, Douglas-fir, Larch and Torrefied-Larch. Density Profile was used to measure the density, and Brinell hardness test and resistance test against momentary impact were carried out for the test of resistance to static load. Also, The hardness and durability of wood were measured by castor test with resistance test against dynamic load, as well as, nail down test by experiment on surface hardness and durability. As a result of the experiment, the hardness was increased in proportion to the density, and it was confirmed that the imported lumber was harder and durable than the domestic larch.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권4호
• /
• pp.213-219
• /
• 2005

본 연구는 310종 다성분 동시분석 법을 활용하여 남해 연안 해역 중 광양만, 여자만, 가막만에서의 미량유기오염물질에 의한 오염특성을 규명하고자 하였다. 채수지점에서 검출된 주요 미량유기오염물질은 aliphatic, polycyclic compounds 와 같은 CH기의 화학물질과 aromatic ammines, nitro compounds와 같은 CHN(O)기의 화학적 구조를 갖는 물질이었다. 미량유기오염물질의 농도는 겨울철보다는 여름철에 높게 나타났으나 검출된 물질 종수와 계절적 상관성은 뚜렷하게 나타나지 않았다. 남해 연안 해역에서 검출된 농약의 총량은 $ND{\sim}9.11$ 이었으며 광양만과 가막만에서 살충제와 제초제의 검출이 집중적으로 관찰되었다. 또한 남해 연안 해역에서 환경호르몬성 물질은 총 6종이 검출되었다. 이러한 결과로부터 남해연안해역의 주요오염인자는 살충제와 제초제, 그리고 수종의 환경호르몬성 물질로 판단된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.587-592
• /
• 2002

A new digital correlator fur an airborne synthetic aperture radiometer was designed in order to replace the conventional analog correlator unit which will become very complicated while the number of channels is increasing. The digital correlator uses digital IQ demodulator instead of the intermediate frequency (IF) phase shifter to make the correlation processing performed digitally at base band instead of analogly at IF. This technique has been applied to the digital receiver in softradio. The down-converted IF signals from each pair of receiver channels become low rate base-band digital signals after under-sampled, Digitally Down-Converted (DDC), decimated and filtered by FIR filters. The digital signals are further processed by two digital multipliers (complex correlation), the products are integrated by the integrators and finally the outputs from the integrators compose of the real part and the imaginary part of a sample of the visibility function. This design is tested by comparing the results from digital correlators and that from analog correlators. They are agreed with each other very well. Due to the fact that the digital correlators are realized with the help of Analog-Digital Converter (ADC) chips and the FPGA technology, the realized volume, mass, power consumption and complexity turned out to be greatly reduced compared with that of the analog correlators. Simulations show that the resolution of ADC has an influence on the synthesized antenna patterns, but this can be neglected if more than 2bit is used.

• 한국광학회지
• /
• 제1권2호
• /
• pp.155-161
• /
• 1990

메틸알코올 레이저의 여기용으로 저속축류형의 가변파장 $CO_2$ 레이저를 제작하였다. 파장가변은 ZnSe Brewster 창과 반사 회절격자를 사용하였으며, 반사 회절격자는 Blaze wavelength 10.6$\mu\textrm{m}$, 100grooves/mm 인 평면형이다. 실험은 $CO_2$ 레이저의 연속발진 출력특을 살펴보고, $CO_2$ 레이저의 전 발진구간을 파장가변시켜 얻어진 출력분포를 $CO_2$ 레이저의 이득 곡선과 비교하였다. 연속발진 출력은 기체 혼합비 $CO_2: N_2$ : He=1:3:10, 전류 55mA, 압력 14 torr 일 때 100W를 얻었다. 가변된 파장은 10.4$\mu\textrm{m}$ 영역의 R(6)-R(38), P(6)-P(36), 9.4$\mu\textrm{m}$ 영역의 R (10)-R(32), P(10)-P(38)의 약 60여개의 회전선이 발진함을 확인하였고, 이 때의 파장은 9.3295$\mu\textrm{m}$에서 10.7648$\mu\textrm{m}$까지 변화하였다. 각 영역에서 얻어진 출력분포는 $CO_2$ 레이저의 이득곡선과 잘 일치하였고, 최대 출력은 20W 정도였다.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.449-458
• /
• 1996

Most of the conventional electrocardiowaphs foil to detect signals other than P-QRS-T due to the limited SNR and bandwidth. High-resolution electrocardiography(HRECG) provides better SNR and wider bandwidth for the detection of micro-potentials with higher frequency components such as vontricular late potentials(LP). We have developed a HRECG using uncorrected XYZ lead for the detection of LPs. The overall gain of the amplifier is 4000 and the bandwidth is 0.5-300Hz without using 60Hz notch filter. Three 16-bit A/D converters sample X, Y, and Z signals simultaneously with a sampling frequency of 2000Hz. Sampled data are transmitted to a PC via a DMA-controlled, optically-coupled serial communication channel. In order to further reduce the noise, we implemented a signal averaging algorithm that averaged many instances of aligned beats. The beat alignment was carried out through the use of a template matching technique that finds a location maximizing cross-correlation with a given beat tem- plate. Beat alignment error was reduced to $\pm$0.25ms. FIR high-pass filter with cut-off frequency of 40Hz was applied to remove the low frequency components of the averaged X, Y, and Z signals. QRS onset and end point were determined from the vector magnitude of the sigrlaIL and some parameters needed to detect the existence of LP were estimated. The entire system was designed for the easy application of the future research topics including the optimal lead system, filter design, new parameter extraction, etc. In the developed HRECG, without signal averaging, the noise level was less than 5$\mu$V$_rms RTI$. With signal averaging of at least 100 beats, the noise level was reduced to 0.5$\mu$V$_rms RTI$, which is low enough to detect LPs. The developed HRECG will provide a new advanced functionality to interpretive ECG analyzers.

• 4차산업연구
• /
• 제1권1호
• /
• pp.1-10
• /
• 2021

Purpose - This case study analyzes the internationalization strategy and innovation strategy as key factors contributing to the business success of CAP, a small and medium-sized manufacturing company in Korea producing auto parts such as wipers. This study describes the diversification strategies conducted by CAP Corporation and highlights the company's core competencies that have largely contributed to their global competitive success. Research design, data, and methodology - This paper provides in-depth case study on how CAP was able to grow into a hidden champion company, focusing on their strategies since its establishment. In particular, by analyzing the success factors centering on CAP's aggressive innovation strategy and internationalization strategy, it presents guidelines for small and medium-sized enterprises in Asian countries to become a Hidden Champion company. Result - CAP's product technology has successfully established innovative system on their product called 'vertebra spring' to distribute uniform pressure to the rubber to ensure performance as well as durability of their products. In order to continue benefiting from utilizing core competence and to continue pursuing technological advancement in the wiper industry, CAP has launched a wide range of products (flat blade, conventional blade, hybrid blade) applicable to 95% of the vehicle in the market. Conclusion - Taken together, CAP has many aspects of a hidden champion company by investing in R&D up to 8% of its annual sales to R&D investment even during the crises situation. This number is about 3.36 times higher than the average ratio of listed companies in Korea. Furthermore, the leadership of the management team as well as their vision toward the global market and strong commitment to innovation enabled CAP to become the world's fifth-largest wiper and Asia's No. 1 wiper manufacturer.