• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.187-188
• /
• 2015

The construction finishing work is emphasized according to high dependence on labor and long term that occupy approximately 40% in construction period, so that it is required for the alternatives such as automation technology. However, it is insufficient to develop the automation technology of construction finishing work compared to other works, for instance, frame work. Also it is not enough about this preliminary research which survey the improvement needs to select the development object. Therefore, this study aimed at derivation of detail works required improvement in ceiling finishing work by the questionnaire survey. These results may provide the basic information to develop the automation technology of construction finishing work.

• Journal of Korean Association for Spatial Structures
• /
• v.21 no.4
• /
• pp.81-89
• /
• 2021

Recently, interest in OSC(Off Site Construction) is increasing due to the trend of a decrease in skilled workers and an increase in labor costs. In this regard, PC(Precast Concrete) is being reviewed for apartments, the most common type of housing in Korea. As the biggest concern for PC apartment houses, civil complaints such as inter-floor noise and leakage were presented. In this study, the details of the joints were reviewed based on the past cases of PC apartments, and the details of the recently constructed or planned PC apartments were investigated. Through this, the leakage path in the past was analyzed through the existing research literature and data. And wall type RC and PC apartment joint leakage test was performed and we found the needs for a detail of waterproof steps, sealant. Also, joint details were investigated for a rahmen type apartment housing under construction. At last, A discussion was conducted on the direction for a detailed proposal of an improved joint in the future.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.2 s.6
• /
• pp.47-58
• /
• 2001

Of all the site logistics technologies in high-rise building construction, both vertical and horizontal move plan, are the most imperative factors. And the horizontal plan follows lift-up plan as of the vertical plan. However though it may be, temporary lifts on site are numbered by heuristic formulas. The quantity of finishing material cannot be converted into lift-up load per finishing material. The lift-up plan cannot be evaluated the feasibility for finishing material move plan by a reasonable evaluation methodology. The horizontal plan is far from the vertical one. And the information as an input data for the horizontal plan is devoid of package unit size, length, and volume per finishing material. These can hardly result in reasonable and detail decision on how much to use temporary lifts, how long to use these, and where to deposit each finishing material. Therefore, this study is to suggest a decision-making model that can integrate vertical and horizontal material move plan in high-rise building construction and make a decision the plans systematically. And the study is to explain the concept, methodology, and contents of the model applied to a virtual project, named as MT 130 (Millennium Tower 130). By the model, the planner can shift his/her thinking framework on site logistics management products-oriented Into process-oriented. He/she can manage a project by the framework as system thinking, evaluate the feasibility of a lift-up plan, and decide the horizontal plan integrated with the lift-up.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.54-60
• /
• 2016

Building information modeling (BIM) has the advantage of having been utilized for various scenarios through a single model. Although extracting 2D drawings from BIM is one of the advantages, there are many difficulties when utilized in practical work. Architectural detail drawings are an important factor for expressing interior finishing materials and complicated construction methods, as well as for cost estimations. However, creating detail drawings does not have a standard, and each design company establishes its own detail drawings, so it is hard to share or exchange information in the construction industry. Therefore, this study suggests a systemized method for making detail drawings, and explains how it can be utilized as back data for quantity take-off and construction expenses linked with BIM libraries.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.48-64
• /
• 2019

With evolution in the production environment of the textile industry, the need for non-water-based dyeing technologies and eco-friendly process facilities in the dyeing and processing stages has increased. In recent years, supercritical fluid dyes have been developed and commercialized in Europe, centering on this demand. However, so far, such dyes have been mainly applied in the processing of PET fibers. Basic research has mainly involved investigation of dyeing by supercritical carbon dioxide or solubility of such dyes, and more in-depth research should be continuously carried out. In this review, we describe the types and characteristics of supercritical fluids that exhibit specific properties at pressures and temperatures over the critical point. In addition, the state of the art in the dyeing and processing technology using supercritical fluids and associated, processing problems, environmental regulation, and wastewater treatment issues are described in detail. We hope this review can contribute to the supercritical fluid technology being further developed as an environment friendly dyeing processing method. Furthermore, we expect that the technique can be used as a means of ensuring different, high-quality dyed products.

• Journal of architectural history
• /
• v.27 no.2
• /
• pp.89-100
• /
• 2018

The stylobate for expanding the external stage area was the most frequently installed installment out of the installments installed for royal court ceremonies. The stylobate was installed for various ceremonies such as funeral rites, ancestral rites, customary formalities, state examination, feasts for celebrating a honored guest of the court, queen's silkworm cultivating ceremony, heir appointment, the presentation of honorary titles for the king or queen in honor of their merits, and entertainment of foreign dignitaries. The exact period stylobates came to be used for the play stage. The stylobate consists of the 紅座板, 屯太木, 竹欄間, 足木, and the 層橋. Depending on the 足木, the substructure of the stylobate, the stylobate could be divided into the 長足木, 中足木, 短足木, 平足木 type. The detail structure of the stylobate changed in form from the jokmok and duntaemok that appeared until the time of King Seonjo, into the 長屯太木, 短屯太木, and the 短短屯太木 during the time of King Heonjong. With the introduction of the 中足木, materials began to become more segmented and the structure stronger. According to existing records, while the height of the stylobate was not significantly high prior to King Seonjo's reign, the 十四層雲橋 and the 十三層層橋 introduced during the time of Emperor Gojong was designed to reflect his rank in external ceremonies while the eight story step bridge was exhibited in internal ceremonies to reflect the rank of Queen Mother Sinjeong. From here, we can deduce that the fourteen and thirteen story cloud bridges representing the king was of a higher grade than the eight story step bridge which represented the queen mother. Finishing by adding boards to the lower part of the stylobates began to appear in the time of King Seonjo. During King Heonjong's reign, the lower finish became gentrified with a thin board called 修粧板, and yeomupan 廉隅板 for decorating the edges of the stylobates were installed. Such style of finishing the lower part of the stylobate with boards mostly appeared in elaborate feasts 進饌 and celebrations 進宴 within the royal court 內宴. The stylobates appeared to have served not only practical purposes such as expanding the stage area, but also as installments which realize the authority and prestige of the royal crown. They were installed according to the purpose of the ceremony and the rank of the participant. In short, stylobates became established during King Seonjo's reign, became segmented and gentrified during King Heonjong's reign, and began to take height variations during Emperor Gojong's reign to reflect the rank and authority of the king and queen mother. As such, it can be considered another characteristic of Joseon Dynasty architecture.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2000.11b
• /
• pp.123-129
• /
• 2000

The purpose of this study was to provide the fundamental data for the effective housing remodeling plan. Through the questionnaire survey, the actual conditions of remodeling in apartment housing were investigated. And as the result of statistic analysis, the relationships between characteristics of remodeling and building life-cycle, and family life-stage, were found out. The major findings of this study are as follows; 1) Most of apartment residents have remodeled the family living space and private living space. In detail, they performed remodeling frequently the change of finishing materials, facilities and equipments, and the change of the location of curtain wall ＆ storage fixtures. 2) It might be predicted that the building life-cycle was influential variable to predict apartment residents' remodeling. Therefore, in planning the support service for the remodeling, the building life-cycle should be taken into consideration.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1353-1360
• /
• 2004

The purpose of this study is to develop a cultural products design of korean image using fabrics. The study is carry out in literature research methods and make sample product. We examine existing researches about cultural product design development to understand developed items, materials, and design directions. The brainstorming method and the established literature researches were used to obtain the design components of Korean image. A cultural products design was developed into the decorative structural details. The results can be summarized as follows: Korean image is pure, passive, gentle, small, and lasting life-force at weeds and wild flowers. Korean form is rounded curve and soft silhouette as streamy, not exaggerate. Korean color is not a finishing treatment, non-dyed natural color, or pastel, light greyish, and dull tone. Korean textile is a natural materials as linen, ramie, and coarse silk. Final sample products are table supplies, home goods and bed goods applying the sewing method of tuck, quilting, top-stitching, patch work, applique and embroidery.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.4
• /
• pp.236-242
• /
• 1998

This paper presents a development of computer aided cutting tool selection techniques for rough and finish turning operations. The developed system,. which is one of important activities for computer aided operation planning, firstly implements operation sequencing. Then, from relations of the size of machined area, recommended finishing allowance and maximum depth of cut, a main machining method is selected, a number of cut is calculated, cutting tools including toolholders and inserts are selected, and values for cutting parameters are determined. A cutting tool selection procedure is proposed for toolholders and inserts of ISO code in rough cutting, and some important parameters such as holder style, tool approach angle, tool function and its direction are described in detail. In order to demonstrate the validity of the system a case study is performed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.232-233
• /
• 2019

The plater work in the standard of estimate presents a variety of construction types. However, there is a part that does not fit the change of specification standards and on-site construction status, and it was revised in 2019's standard of estimate. In this study, we analyzed in detail the factors affecting the changes in estimating standards in the plater work. There were changes in the specification standards previously presented as primary coat, secondary coat, and formal coat as well as changes in on-site construction status such as thickness according to the number of plastering. Therefore, it is analyzed that the estimating standards can be classified by the number of finishes according to the site conditions by reflecting the analysis of the specification standards and site application status, and suggesting the finishing standards according to the number of plastering.