• 한국염색가공학회지
• /
• 제8권5호
• /
• pp.76-83
• /
• 1996

Fragrant microcapsules were prepared by in situ polymerization using urea-formaldehyde prepolymer. Lemon oil and migrin oil as susceptible materials were used. The diameter and distribution of the microcapsule were controlled by several factors, such as wall material, core material content, emulsion agent and stirring speed, respectively. Susceptible cotton fabrics with fragrant release functionality were successfully produced by using microcapsule containing fragrant materials.

• 한국염색가공학회지
• /
• 제23권4호
• /
• pp.298-303
• /
• 2011

Aramid fibers have been widely used as the reinforcement for composites due to their high modulus and strength. Nowadays the safety measures is required to improve the personal protection. The dyeing of aramid fibers is considered to be very difficult and their dyeing mechanism is not well illucidated. Therefore, this study is to establish the dyeing & printing technology for aramid fibers. The effects of swelling agent and neutral salt in the dye bath on the obtained colors were studied. Also dyeing method of aramid fibers depending on dyeing temperature and dye concentration were established. Color fastness of the dyed aramid fabric with cationic dyes were acceptable excluding light fastness.

• 한국건축시공학회지
• /
• 제12권1호
• /
• pp.64-72
• /
• 2012

Recently, prepackaged-type surface preparation materials using redispersible polymer powders are widely used for interior and exterior finishing in the construction work. The purpose of this study is to evaluate the performance and the quality of prepackaged-type surface preparation materials using a VA/E/MMA terpolymer powder. Surface preparation materials using a VA/E/MMA terpolymer powder were prepared with shrinkage reducing agent contents of 0, 4 % and cellulose fiber contents of 0, 0.5, 1.0 %, and tested for drying shrinkage, strengths, adhesion in tension, crack and impact resistance, water absorption, permeability. As a result, prepackaged-type surface preparation materials show outstanding performance depending on the shrinkage reducing agent and cellulose fiber contents.

• 한국의류학회지
• /
• 제26권10호
• /
• pp.1401-1411
• /
• 2002

To Save energy and cost one bath/one step dyeing and finishing on cotton/polyester blends is carried out with disperse dyes in the presence of crosslinking agent. Cotton 100 %, cotton/polyester 70/30, 50/50, 35/65, polyester 100 % fabrics were used. wrinkle recovery angle, tensile strength retention and tearing strength retention were determined in according to the dyebath composition, and also determined while the concentration of DMDHEU, molecular weight and concentration of PEG were varied. Colorfastness to abrasion, washing and light were tested. For cotton and cotton/polyester blends dyed in the presence of DMDHEU/PEG, wrinkle recovery was improved. Tensile strength retention and tearing strength retention were decreased, in compared with dyed fabrics without DMDHEU. Colorfastness to abrasion was good but colorfastness to washing and to light were poor for the fabrics dyed in the presence of DMDHEU/PEG.

• 한국염색가공학회지
• /
• 제11권6호
• /
• pp.7-17
• /
• 1999

Aminophosphazene derivatives were prepared from hexachlorocyclotriphosphazene and used for the curing agents of epoxy resins. The effect of the curing agent on the dynamic viscoelastic properties, flame proofing, and heat resistance of the cured epoxy resins were investigated and compared with those for the epoxy resins cured with aliphatic and aromatic amines. The epoxy resin cured by 1,1-diamino-3,3,5,5-tetrachlorocyclotriphosphazene showed the highest storage modulus and glass transition temperature when cured at 19$0^{\circ}C$ for 6 hours. The epoxy resins cured with phosphazene derivatives showed superior flame proofing to those with aliphatic amine and aromatic amine. Particularly it is an effective curing agent for epoxy resins to enhance the storage modulus, flame proofing and resistance to heat.

• 한국염색가공학회지
• /
• 제15권6호
• /
• pp.18-26
• /
• 2003

Nylon 6.6 was treated with anionic synthetic tanning agent at different pH values, temperatures and liquor ratios to determine exhaustion properties. Treatments using syntan were conducted to the undyed nylon 6.6 fiber and three acid dyeings and then samples of the bath solution were subjected to HPLC analysis. Mass analysis was considered to determine the syntan components. In addition, the effect of applications using syntan and syntan/cation in improving the stain resistance was observed. The optimum treatment condition of syntan was achieved and the major component of syntan, being exhausted to the nylon substrates, was determined. In terms of stain blocking effect, a significant improvement was achieved by the syntan and syntan/cation treatments.

• 한국염색가공학회지
• /
• 제6권4호
• /
• pp.1-8
• /
• 1994

To improve the antimicrobial activity and crease resistance of Korean traditional Hansan ramie fabrics, partially saponified polyethylene(PPS) was used as a softening water repellent agent and 3-(trimethoxysilyl)propyl dimethyl octadecyl ammonium chloride(QAC) as a antimicrobial agent. The antimicrobial activity was effective by treatments of PPS, QAC and PPS/QAC for shake flask test. For the halo test, PPS/QAC showed good antimicrobial activity. It was found that the desirable composition of H$_{2}$O/PPS/QAC is 98/1/1 for improving the antimicrobial activity and crease resistance of the fabrics.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.123-131
• /
• 2010

Shape and size controlled synthesis of gold particles has been studied by using wet-chemical method. When ${AuCl_4}^-$ in aqueous $HAuCl_4$ precursor was reduced using $Na_2SO_3$ as a reducing agent, mixtures of spherical, triangular and hexagonal particles were prepared in a few minutes. It was found that the shape selective oxidative etching by ${AuCl_4}^-\;+\;Cl^-$ anions and crystal growth took place simultaneously. As the ${AuCl_4}^-$ and $Cl^-$ concentration increased, yields of large triangular and hexagonal plate type particles increased, while the spherical particles decreased in most cases. Possible etching and growth mechanisms are discussed.

• 한국염색가공학회지
• /
• 제32권2호
• /
• pp.73-79
• /
• 2020

Pursuing the fabric materials for military chemical warfare protective clothing with the improved detoxification properties, this study investigated the simple and effective cotton treatment method using pad-dry-cure process and 3-aminopropyltrimethox ysilane(APTMS) solution for surface amination. Detoxification properties of the untreated and treated cotton fabrics were evaluated via decontamination of chemical warfare agent simulant, DFP(diisopropylfluorophosphate). The surface aminated cotton fabric increased the rate of the hydrolysis of DFP by the factor of 3 and the decontamination ratio reached 88.2% after 24h. Therefore, the surface amination of the cotton fabric with APTMS can be an effective pathway to prepare the material for protective clothing against chemical warfare agents.

• 한국염색가공학회지
• /
• 제7권3호
• /
• pp.15-21
• /
• 1995

Polyurethane microcapsules containing dibutylphthalate(DBP) were perpared by the interfacial polymerization using diisocyanates and polyois. Effects of chemical structure of PU, dispersing agent and polymerization time on the mean diameter of microcapsules were investigated. The releasing of DBP from microcapsules depended on the chemical structure of PU and solvents. The diameter decreased with increasing dispersing agent concentration, and it is decreased in the order of the dispersing agents using gelatine > PVA > arabic gum at the same concentration. A slight increase in the diameter was observed when the ratio C$H_2$/OOCNH of PU was increased. As the ratio C$H_2$/OOCNH of PU was increased, the amount of extracted DBP for hexane using as a extracting solvent was decreased, however, it was not changed for THF.