• Journal of the Korean Geotechnical Society
• /
• v.23 no.9
• /
• pp.5-16
• /
• 2007

The simple linear elastic-perfectly plastic model with soil parameters $s_u,\;E_u$ and n of undrained condition is usually applied to predict the displacement of a constructed diaphragm wall(DW) on soft soils during excavation. However, the application of this soil model for finite element analysis could not interpret the continued increment of the lateral displacement of the DW for the large and deep excavation area both during the elapsed time without activity of excavation and after finishing excavation. To study the characteristic behaviors of soil behind the DW during the periods without excavation, a series of tests on soft Bangkok clay samples are simulated in the same manner as stress condition of soil elements happening behind diaphragm wall by triaxial tests. Three kinds of triaxial tests are carried out in this research: $K_0$ consolidated undrained compression($CK_0U_C$) and $K_0$ consolidated drained/undrained unloading compression with periodic decrement of horizontal pressure($CK_0DUC$ and $CK_0UUC$). The study shows that the shear strength of series $CK_0DUC$ tests is equal to the residual strength of $CK_0UC$ tests. The Young's modulus determined at each decrement step of the horizontal pressure of soil specimen on $CK_0DUC$ tests decreases with increase in the deviator stress. In addition, the slope of Critical State Line of both $CK_0UC$ and $CK_0DUC$ tests is equal. Moreover, the axial and radial strain rates of each decrement of horizontal pressure step of $CK_0DUC$ tests are established with the function of time, a slope of critical state line and a ratio of deviator and mean effective stress. This study shows that the results of the unloading compression triaxial tests can be used to predict the diaphragm wall deflection during excavation.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.211-222
• /
• 2016

This study was conducted to investigate the physico-chemical meat quality and sensory properties of Holstein steers(n=18, 4 months old, average body weight 160kg) which were divided into 3 groups and fed 2 different energy levels of total mixed rations(TMR)(T1, TDN 74~84%; T2, TDN 77~85%) until 18, 20 or 22 months old, respectively. For loin muscles, 22-month group of T1 and 20- and 22-month groups of T2 had higher fat contents than the other groups (P<0.05). T2 had higher WHC values for 18-month groups among 3 feeding groups (P>0.05). In sensory properties, T1 had higher tenderness, flavor-likeness and overall likeness for 20-month group than the other groups (P<0.05). T2 had higher tenderness, juiciness, flavor likeness and overall likeness in 20- and 22-months groups than 18-month group (P<0.05). For top round muscles, 22-month group had higher fat contents than the other groups of T1 and T2 (P<0.05). T1 had higher in redness(a* value) and yellowness (b* value) of 22-month group (P<0.05). T2 had higher WHC values, lower WBS and CL values in 18-month group than the other groups (P<0.05). In sensory properties, T1 had higher tenderness for 18 and 20-month groups and overall likeness (P<0.05). T2 had higher tenderness in 18-month group. The results of this study showed that longer feeding of agricultural by-product TMR increased the intramuscular fat contents, however, the 18 and 20-months finishing groups were advantageous for the meat quality and sensory properties of Holstein steers.

• Korea Science and Art Forum
• /
• v.21
• /
• pp.105-116
• /
• 2015

This study intended to give helps in planning a specialized exhibition by carrying out a survey objecting to KOREA PACK 2015 attendees including visitors who possessed mobile coupons after finishing advance registration through on-line, and then investigating, analyzing satisfactions of attendees together with effects of the specialized exhibition using IT technology. As a lot of relevant preceeding researches have been made by focussing on exhibition organizer and exhibitors, the viewpoints of attendees at the specialized exhibition using IT conversing technology such as mobile and etc. were to be investigated and analyzed. Thus, this research tried to do an empirical identification on effects of the exhibition by analyzing relations between its watching forms and satisfactions including a survey on the on-line PR route utility of IT technology in addition to visiting motives of attendees who watched the exhibition. A summarization of the current study is followed: First, in case of attending in the exhibition for specific purposes, they searched related information positively, and were shown as doing information gathering behaviors and also high possibility on purchases was confirmed. Second, it was confirmed that positive attendees had decision-making on purchases. This finding means that attendees who watch the specialized exhibition have authority and responsibility of being able to purchase in many cases, so methods of improving sales by effectively doing PR on own products and technical competitiveness in the exhibition are necessary to exhibitors. Third, attendees who have specific purposes showed higher satisfactions on the exhibition than general visitors, but satisfactions on consultation, staff attitudes, and facility were turn out to be higher than providing related information on products or technology. Accordingly, the necessity of improving this outcome was confirmed. Therefore, exhibitors have to endeavor in providing more advanced services to attendees of the exhibition by grasping technical trends in advance as well as cultivating professional staff who can promote products well.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.4
• /
• pp.8-20
• /
• 2023

Although the landscape architectural facilities need to be repaired according to historical and authentic techniques, the repair criteria of the standard specification for repairing cultural heritages still remain at a theoretical level, and there are little research analyzing detailed techniques from specific cases. This study discussed the repair techniques based on historical facts, around terraced flower beds, ponds, waterways and pavement in the government-managed spaces in the Joseon Dynasty. It analyzed the materials and finish of stone wall elements, the structural reinforcement and backfill materials, and topsoil surface protection measures, and drew out stones for foundation reinforcement, plastering material for agglutination, and stone processing techniques for the terraced flower beds. It examined the materials and structures of the rock revetment, foundation reinforcement and waterproofing techniques and drew out the outstanding characteristics of the foundation work, the recycle of used elements and the management of water quality, for the ponds. It primarily investigated the materials, foundation reinforcement and waterproofing techniques and discovered the repair techniques such as cover stone finishing methods, foundation and backfill materials, and flow reduction methods, for the waterways. Finally, it provided actual cases of the foundation composition, auxiliary materials and tools, and the use of cyperaceae and highlighted the existence of professional craftsmen called Bangjeonjang(方磚匠), for the pavement. This study is expected to be a staring point for discovering the repair techniques for landscape architectural facilities and used as basic data for revising specifications in the future.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.195-203
• /
• 2023

Purpose: This study aimed to evaluate the influence of surface sealants on the surface roughness of composite resins. Materials and Methods: The study used microfilled composite resin (Metafil CX, Sun Medical Co.) and hybrid composite resin (Aelite^TM LS posterior, Bisco). Sixty specimens (8 mm in diameter and 4 mm in height) of each composite resin type were prepared and divided into 3 groups. Each specimen was ground with 600, 1000, and 2000-grit sandpaper. The Surface roughness (Ra) values were measured using a surface roughness tester (SJ-301, Mytutoyo) before and after surface sealant application. Surface sealants, BisCover^TM LV (Bisco), Optiguard^® (Kerr), and Seal-n-Shine^TM (Pulpdent), were applied to the specimens, as instructed and observed by scanning electron microscope (JSM-7500, JEOL) and atomic force microscope (MultiMode IV, Veeco Instruments). Results: Specimens ground with 600-grit sandpaper coated with surface sealants exhibited significantly lower Ra values than the untreated group (P < 0.05). Specimens ground with 1000 and 2000-grit sandpaper showed statistically no difference. There was no significant difference in surface roughness among BisCover^TM LV, Optiguard^®, and Seal-n-Shine^TM. SEM and AFM revealed remarkably decreased microdefects on the surfaces of composite resins after surface sealant application. Conclusion: Surface sealants can influence surface roughness when applied on the rough surface of composite resins but not on highly polished composite resins.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.777-786
• /
• 2003

An experiment was conducted to investigate the effects of supplementary Blended essential oil(CRINA$^{\circledR}$) on the performance, nutrient availability, fatty acid composition of leg muscle, small intestinal microflora and blood parameters in broiler chickens. One thousand unsexed day-old broiler chickens were assigned to five treatments : control(T1), 5ppm avilamycin(starter diet) & 5ppm flavomycin(grower diet) T2, 5ppm avilamycin(starter diet) & 50ppm CRINA$^{\circledR}$(grower diet) T3, 50ppm CRINA$^{\circledR}$(starter & grower diet) T4, 50ppm CRINA$^{\circledR}$+ 500ppm lactic acid$^{\circledR}$ (starter & grower diet) T5. Each treatment had four replications of 50 birds each. Growth performance was significantly improved by dietary supplements(T2-T5). There were no significant differences among treatment T2, T3, T4 and T5. Feed intake was not significantly different among treatments. Dietary supplementation of CRINA$^{\circledR}$(T3, T4, T5) resulted in significant(p〈0.05) improvement in feed/gain(F/G) during finishing period (4-5weeks). The birds fed CRINA$^{\circledR}$ supplemented diet(T4) showed significantly(p〈0.05) higher availability of crude fat, methionine and methionine + cystine than those fed antibiotics supplemented diet(T2). Mortality was not significantly affected by treatments. The colony forming unit(CFU) of E.coli in small intestinal content was significantly lower in antibiotics & CRINA$^{\circledR}$(T3) compared to CRINA$^{\circledR}$ treatment(T4)(P〈0.05). CFU of Cl. perfringens was low in CRINA$^{\circledR}$(T4) but not different significantly with other treatments. Serum triglyceride level of birds fed CRINA$^{\circledR}$ + lactic acid diet(T5) was significantly lower(p〈0.05) than those fed antibiotics supplemented diet(T2). Cholesterol level of the birds fed antibiotics(T2) or CRINA$^{\circledR}$ + lactic acid supplemented diet(T5) was significantly higher(p〈0.05) than other treatments. HDL level of birds fed control diet was significantly lower(p〈0.05) than that of others. The levels of serum IgG were not significantly different among treatments. Major fatty acids composition of leg muscle fat was significantly influenced by treatments. Control group showed significantly higher palmitic acid(C$_{16:0}$) and steraric acid(C$_{18:0}$) content than other treatments(p〈0.05). Content of oleic acid(C$_{18:1}$), however, was significantly lower in the control than others treatments. Content of linolenic acid(C$_{18:3}$) was significantly higher in CRINA$^{\circledR}$+ lactic acid(T5) than antibiotics & CRINA$^{\circledR}$(T3) treatments. Total saturated fatty acids content was higher and total unsaturated fatty acids were lower in the leg muscle fat of the control than that of other treatments. It is concluded that CRINA$^{\circledR}$ supplementation improved growth rate and F/G ratio in broilers. The combination of CRINA$^{\circledR}$ with either antibiotics or lactic acid did not show any additive or synergistic effects in broiler chickens .

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.172-189
• /
• 2016

In this research, literature research on the Odong material, mixture ratio, casting method and casting facility was conducted on contemporary documents, such as Cheongong Geamul. Also, a long sword was produced using the Odong inlay technique. The sword reproduction steps were as follows; Odong alloying, silver soldering alloying, Odong plate and Silver plate production, hilt and sheath production, metal frame and decorative elements, such as a Dugup (metal frame), production, Odong inlay assembly and final assembly. For the Odong alloy production, the mixture ratio of the true Odong, which has copper and gold ratio of 20:1, was used. This is traditional ratio for high quality product according to $17^{th}$ century metallurgy instruction manual. The silver soldering alloy was produced with silver and brass(Cu 7 : Zn 3) ratio of 5:1 for inlay purpose and 5:2 ratio for simple welding purpose. The true Odong alloy laminated with silver plate was used to produce hilt and sheath. The alloy went through annealing and forging steps to make it into 0.6 mm thick plate and its backing layer, which is a silver plate, had the matching thickness. After the two plates were adhered, the laminated plate went through annealing, forging, engraving, silver inlaying, shaping, silver welding, finishing and polishing steps. During the Odong colouring process, its red surface turns black by induced corrosion and different hues can be achieved depending on its quality. To accomplish the silver inlay Odong techniques, a Hanji saturated with thirty day old urine is wrapped around a hilt and sheath material, then it is left at warm room temperature for two to three hours. The Odong's surface will turn black when silver inlay remains unchanged. Various scientific analysis were conducted to study composition of recreated Odong panel, silver soldering, silver plate and the colouring agent on Odong's surface. The recreated Odong had average out at Cu 95.57 wt% Au 4.16wt% and Cu 98.04 wt% Au 1.95wt%, when documented ratio in the old record is Cu 95wt% and Au 5wt%. The recreated Odong was prone to surface breakage during manufacturing process unlike material made with composition ratio written in the old record. On the silver plate of the silver and Odong laminate, 100wt% Ag was detected and between the two layers Cu, Ag and Au were detected. This proves that the adhesion between the two layers was successfully achieved. The silver soldering had varied composition of Ag depending on the location. This shows uneven composition of the silver welding. A large quantities of S, that was not initially present, was detected on the surface of the black Odong. This indicates that presence of S has influence on Odong colour. Additional study on the chromaticity, additional chemical compounds and its restoration are needed for the further understanding of the origin of Odong colour. The result of Odong alloy testing and recreation, Odong silver inlay long sword production, scientific analysis of the Odong black colouring agent will form an important foundation of knowledge for conservation of Odong artifact.