• Science of Emotion and Sensibility
• /
• v.19 no.3
• /
• pp.71-80
• /
• 2016

The purpose of this study was to examine the effects of display on time on tasks and virtual presence in the immersive virtual reality. Head mounted display (HMD) and monitor conditions were compared when the participants were asked to complete navigation tasks in a virtual classroom. Time on tasks and virtual presence were measured. Three factors of the virtual presence were applied as dependent variables such as 1) spatial presence, 2) involvement, and 3) realness. The results showed that HMD condition took longer time to finish tasks than monitor conditions. HMD condition showed significantly higher perception from all of the virtual presence factors. Interestingly, there was a significant interaction effect between the display conditions and presence factors. The relationship between display types and virtual presence factors were discussed for future study.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.422-425
• /
• 2003

The purpose of this study is using a TACT planning and scheduling for apartment houses construction that have many of same units. Because using a TACT planning and scheduling is concluded time reduction at same units as apartment plan. The main contents of this study are 1) window and door work through the field study, 2) adjust worker assignment to minimize work time variation, and 3) an effect of working time through a case study. As a result, the total working time can be improved $21.2\%$ by using the TACT planning and scheduling. The stu요 recommends that 1) establish an accurate data between work period and resource, and 2) preparation to measures minimization of waiting time before using a TACT planning and scheduling.

• The Journal of the Korea Contents Association
• /
• v.17 no.8
• /
• pp.351-365
• /
• 2017

Illness has long been an important plot device in Korean dramas. In earlier years, the device typically was supposed to be in the form of a terminal bodily disease occurring for the female main character toward the end of the story. On the other hand, the latest trend is to situate a mental illness for the male lead character at the earlier part, and use it as a tool to build characters, construct causal relations and set the intense tone for the overall story. The mental illness as a plot device helps to provide a series of reversals, revelations and turnarounds, giving viewers a stronger sense of intensity, empathy and identification. While the illness used to play the role of a deus ex machina to make a big emotional finish, the latest adoption of the mental illness as a main plot device has enhanced the flexibility of the plot and the effect of versimilitude in dramas. These noticeable changes make one suspect that the focus of Korea's drama contents might have already begun to grow out of the conventional soap operas into different genres.

• The KIPS Transactions:PartD
• /
• v.14D no.6
• /
• pp.641-648
• /
• 2007

To develop a dynamic system project in which the requirement changes frequently, it's impossible to finish the development within a fixed-cost due to additional budget occurring in need of requirement creep. To manage the successive project within a fixed-cost, it's better to manage the ratio of necessarily changed size of project and necessary optional requirement. According to Bhagwat, it is occurred in the construction phase. Also, he stated that the software development cost, construction phase cost and requirement cost are equal and it was wrong explanation in the ratio of requirement creep and optional requirement. This paper assumes the requirement creep to be happening in the phase of elaboration and construction. In addition, some differences were supposed to happen between software development cost, construction phase cost, and requirement creep cost. As a result, the reality was preferred rather than the ratio of optional requirement and the ratio of requirement creep.

• Journal of Korean Clinical Nursing Research
• /
• v.14 no.3
• /
• pp.27-36
• /
• 2008

Purpose: This study was to investigate the effects of foot massage on fatigue and depression among patients undergoing chemotherapy with hematological malignancies. Method: The subjects were 60 patients hospitalized for undergoing chemotherapy from September 2007 to March 2008, and 30 of them were the experimental group and the other 30 were the control group. To the subjects in the experimental group, foot massage was provided for 30 minutes everyday before the chemotherapy at the same time for 4 days, and the effect was measured on Day 4 and 5 after chemotherapy. Fatigue was measured using the Brief Fatigue Inventory (BFI) developed by Mendoza et al. (1999), and depression was measured by psychiatric rating scale SCL-90-R developed by Derogatis (1977) and translated by Kim Gwang il et al. The data were analyzed through $x^2$-test, Fisher's exact test, unpaired t-test and repeated measures ANOVA using SPSS 12.0. Results: Fatigue and depression were significantly lower in the experimental group than in the control group. Even on Day 5, fatigue and depression were significantly lower in the experimental group than in the control after finish foot massage. Conclusion: The findings of the study demonstrated that foot massage would be an effective nursing intervention to reduce fatigue and depression in patients with hematological malignancies.

• Journal of Arbitration Studies
• /
• v.18 no.2
• /
• pp.3-31
• /
• 2008

At its thirty-ninth session(New York, 19 June - 7 July 2006), United Nations Commission on International Trade Law(hereinafter referred to as the Commission) agreed to give priority to the topic of revising the UNCITRAL Arbitration Rules. From the forty-fifth through the forty-seventh session, the Working Group checked various issues based on the draft revised version of the UNCITRAL Arbitration Rules prepared by the Secretariat. At its forty-eighth session, the Working Group is going to finish its first reading of articles 38 to 41 of the draft revised version of the UNCITRAL Arbitration Rules, and to commence its second reading of the draft revised version of UNCITRAL Arbitration Rules. Korea is keen on enticing foreign direct investment into its territory. From the 1960s, Korea has concluded more than 80 BITs. Korea is making efforts to conclude FTAs with its trading partners. As of January, 2008, 3 FTAs have taken into effect with respect to Korea. According to provisions on dispute settlement found in such BITs and FTAs involving Korea, the Rules can be chosen for Investor-State Arbitration. Furthermore, the Rules is followed by the arbitration rules for domestic and international arbitrations administered by the Korean Commercial Arbitration Board. If the Commission adopts the revised version of UNCITRAL Arbitration Rules, the Rules will be able to give impact on the arbitration law and practice around the world of arbitration. That is the reason why we should keep attention to the development of the deliberations of the Working Group.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.2
• /
• pp.165-174
• /
• 1990

The purpose of the study was to correlate margin design(chamfer, shoulder, shoulder with a $45^{\circ}$ bevel. with the seating and sealing of cemented full cast crowns under standardized simulated clinical conditions. Wax patterns were made with milled stainless-steel dies and rings, and were invested, burnt out, and cast. The full cast crowns were comented on individual resin dies, and a gradually diminishing load(45kg to 25kg. was applied over a 10-minute period. The specimens were sectioned centrally with a low speed diamond saw and examined with light microscope. The results were as follows : 1. Chamfer preparations demonstrated it was the best marginal seal, followed in order by the shoulder with a $45^{\circ}$ bevel, and by the shoulder(p<.05). 2. Chamfer preparations demonstrated it was the best occlusal seating, followed in order by the shoulder, and by the shoulder with a $45^{\circ}$ bevel(p<.05).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.4
• /
• pp.357-369
• /
• 1989

The purpose of this study was to investigate the effects of treatment temperature and time on the, of easy-care and strength properties of the wet fixation processed rayon fabrics. Viscose rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100 and 100/150(g/1). Magnasium chloride was used as a catalyst. The wet fixation conditions were 24hrs at room temperature,20 mins at $75^{\circ}C$ and 5 mins at $105^{\circ}C$ Wet fixation processed fabrics did not show the difference in the resin add-one, DP ratings and wrinkle recovery angles by the different treatment temperatures and times. DP ratings were in the order of $105^{\circ}C>75^{\circ}C>room$ temp, in one bath and two bath wet fixation. Breaking and tearing strength of one bath processed fabrics showed in the order of $75^{\circ}C>room\;temp>105^{\circ}C$ The breaking strength of two bath processed fabrics showed in the order of $105^{\circ}C>75^{\circ}C>room$ temp. Tearing strength showed in the order of $75^{\circ}c>105^{\circ}C>room$ temp. Abrasion resistances were in the order of $75^{\circ}C>105^{\circ}C>room$ temp. in one bath and two bath processes.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.3
• /
• pp.113-118
• /
• 2011

PURPOSE. The objective of the present study was to evaluate the effect of five different metal framework designs on the fracture resistance of the metal-ceramic restorations. MATERIALS AND METHODS. For the purpose of this study, the central incisor tooth was prepared, and the metal analogue of it and a master die were fabricated. The counter die with the 0.5 mm clearance was used for fabricating the wax patterns for the metal copings. The metal copings with five different metal framework designs were designed from Group 1 to 5. Group 1 with the metal collar, Group 2, 3, 4 and 5 with 0 mm, 0.5 mm, 1 mm and 1.5 mm cervical metal reduction respectively were fabricated. Total of fifty metal ceramic crown samples were fabricated. The fracture resistance was evaluated with the Universal Testing Machine (Instron model No 1011, UK). The basic data was subjected to statistical analysis by ANOVA and Student's t-test. RESULTS. Results revealed that the fracture resistance ranged from 651.2 to 993.6 N/$m^2$. Group 1 showed the maximum and Group 5 showed the least value. CONCLUSION. The maximum load required to fracture the test specimens even in the groups without the metal collar was found to be exceeding the occlusal forces. Therefore, the metal frameworks with 0.5 mm and 1 mm short of the finish line are recommended for anterior metal ceramic restoration having adequate fracture resistance.

• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2182-2189
• /
• 2004

In the recent years, environmentally conscious design and manufacturing technologies have attracted considerable attention. The coolants, lubricants, solvents, metallic chips and discarded tools from manufacturing operations will harm our environment and the earth's ecosystem. In the present work, the Tukey method of multiple comparisons is used to select the minimum level of coolant required in a turning process. The amount of coolant is varied in 270 designed experiments and the parameters cutting temperature, surface roughness, and specific cutting energy are carefully evaluated. The effects of coolant mix ratio as well as the amount of coolant on the turning process are studied in the present work. The cutting temperature and surface roughness for different quantity of coolant are investigated by analysis of variance (ANOVA) - test and a multiple comparison method. ANOVA-test results signify that the average tool temperature and surface roughness depend on the amount of coolant. Based on Tukey's Honestly Significant Difference (HSD) method, one of the multiple comparison methods, the minimum level of coolant is 1.0 L/min with 2% mix ratio in the aspect of controlling tool temperature. F-test concludes that the amount of coolant used does not have any significant effect on specific cutting energy. Finally, Tukey method ascertains that 0.5 L/min with 6% mix ratio is the minimum level of coolant required in turning process without any serious degradation of the surface finish. Considering all aspects of cutting, the minimum coolant required is 1.0 L/min with 6% mix ratio. It is merely half the coolant currently used i.e. 2.0 L/min with 10% mix ratio. Minimal use of coolant not only economically desirable for reducing manufacturing cost but also it imparts fewer hazards to human health. Also, sparing use of coolant will eventually transform the turning process into a more environment-conscious manufacturing process.