• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.412-422
• /
• 1999

Scale defects generated on the strip surface in a tandem finishing mill line are collected from the strip trapped among the production mills by freezing the growing scale on the strip by the melt glass coating and shutting down the line simultaneously. The samples observed of its cross sectional figure showed the process of scale defect formation where the defects are formed at the base metal surface by thicker oxidized scale during each rolling passes. The properties of the oxidized layer growth both at rolling and inter-rolling are detected down sized rolling test simulating carefully the rolling condition of the production line. The thickness of the oxidized layer at each rolling pass are simulated numerically. The critical scale thickness to avoid the defect formation is determined through the expression of mutual relation between oxidized layer thickness and the lanks of the strip called quality for the scale defects. The scale growth of scale less than the critical thickness and also to keep the bulk temperature tuning the water flow rate and cooling time appropriately. Two units of Inerstand Cooler are designed and settled among the first three stands in the production line. Two units of scale defect is counted from the recoiled strip and the results showed distinct decrease of the defects comparing to the conventionaly rolled products.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.22-26
• /
• 2006

Total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcination process, and XRD measurement shows that $BaF_2,\;CuO,\;and\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcination was measured to be ${\sim}2.8$ um by applying slot-die coating method. In particular, addition of Samarium shows critical current of Ic=226 A/cm-w($Jc=3.4\;MA/cm^2$). Also discussed are recent developments in the reel-to-reel processing using F-free Y & Cu precursor solutions. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solutions in MOD process.

• 건축역사연구
• /
• 제31권4호
• /
• pp.45-56
• /
• 2022

Gachiljang(假漆匠), along with Jinchiljang(眞漆匠), is an important craftsman who cannot be left out during the finishing process of wooden furniture and wooden buildings during the Joseon Dynasty. The current definition of Gachiljang does not properly explain the nature and role of Gachiljang. In many related terminology dictionaries, Gachiljang is defined as "artisan who dose the base paintwork of Dancheong." But an analysis of the Joseon Dynasty's Uigwe(儀軌) shows that Gachiljang appears frequently in works that are not related to Dancheong at all. Therefore the current definition seems to be inaccurate and need to be revised. Gachiljang is a name that contrasts with Jinchiljang, and he makes and paints Myongyu(明油). Just as Jinchiljang uses not only lacquer but also various pigments to paint colorful lacquer, Gachiljang also uses various pigments to decorate buildings or furniture in a fancy way and then finishs with a transparent paint. Even in the Dancheong(丹靑) work of the building, all the base painting and finish coating work will be in charge of Gachiljang, except for the paintings performed by the Whawon(畫員) or the Whasa(畫師).

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.1-4
• /
• 2007

The total Fluorine content in the precursor solution for MOD processing of YBCO coated conductors can be significantly reduced by synthesizing precursor solution with F-free Y & Cu precursor and Barium trifluoroacetate(TFA). It was shown that crack-free and uniform precursor films were formed after calcinations in humidified oxygen atmosphere. Less than 2 hours are required to finish the calcinations process and XRD measurement shows that $BaF_2,\;CuO,\;Y_2O_3$ are major constituent of calcined precursor films. Film thickness after calcinations was improved to be 2.8um by applying slot-die coating method. In particular, addition of Samarium shows critical current of $I_c=273A/cm-w(J_c=3.8MA/cm^2)$. It is shown that uniform and fast processing route to YBCO coated conductor with high Ic can be provided by employing F-free Y & Cu precursor solution in MOD process.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1958-1967
• /
• 2004

This paper describes the method to rapidly fabricate the large-sized physical model with the envelope model size of more than 600 mm${\times}$ 600 mm${\times}$ 600 mm using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology. The fabrication procedure of the large-sized solid shape is as follows: (1) Generation of STL data from 3D scan data using 3D scanner, (2) generation of shell-type STL data by Boolean operation, (3) division of shell-type STL data into several pieces by solid splitting, (4) generation of USL data for each piece with VLM-Slicer, (5) fabrication of each piece by cutting and stacking according to USL data using VLM-ST apparatus, (6) completion of a shell-type prototype by zigzag stacking and assembly for each piece, (7) completion of a 3D solid shape by foam backing, (8) surface finish of a completed 3D solid shape by coating and sanding. In order to examine the applicability of the proposed method, the miniature of the Mount Rushmore Memorial has been fabricated. The envelope model size of the miniature of the Mount Rushmore Memorial is 1,453 mm${\times}$ 760 mm${\times}$ 853 mm in size. From the result of the fabricated miniature of the Mount Rushmore Memorial, it has been shown that the method to fabricate the large object using two type semi-automatic VLM-ST processes in connection with the reverse engineering technology are very fast and efficient.

• 한국응용과학기술학회지
• /
• 제32권4호
• /
• pp.694-701
• /
• 2015

In order to get stabilized pure retinol in skin care cosmetics, developing the three layered matrix bead capsules were studied. This study relates to make a cosmetic composition using the three layered matrix capsule that could increase the stability of the active ingredient. A primary encapsulation, vitamin A (pure retinol) of active ingredient was perfectly capsulated into water-in-oil (Water-in-Oil: W/O) emulsion vesicle using PEG-10 dimethicone copolyol emulsifier. A secondary encapsulation of multiple emulsion of the water-in-oil-in-water (W/O/W) emulsion blending W/O emulsion using sucrose distearate of surfactant was developed using homogenizing emulsifying system. Pure retinol of active ingredient was stably capsulized to inside the W/O/W-multiple emulsion in order to load the triple matrix capsulation. By coating it with a polymer matrix base, encapsulated in the triple layered type, which were developed bead encapsulation of 2~10mm uniformly size. To show beautifully appearance capsulated bead type, these finish particles in this triple matrix layer were developed as a gold, green, dark brown, silver and blue color were encapsulated in the bead types. Structural particle certification of triple matrix layer was observed through SEM analysis. Stability of pure retinol was remained stable more than 99.7% for 30 days at $42^{\circ}C$ incubating conditions compared with non-capsule. This technology was applied in different formulations such as various sizes and colors that by applying the skin care cosmetics. In the future, this technology to encapsulate an unstable active ingredient, we expect to be expanded this application in the food and drug as a time delivery system.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권5호
• /
• pp.114-122
• /
• 2007

강구조물의 고력볼트 마찰접합부에 있어서 마찰면의 부식은 장기적으로 마찰력 감소와 접합부 내력저하를 초래한다. 본 연구는 고력볼트 접합부의 부식을 방지하고 소요 역학적 성질을 만족시키기 위해 접합부의 마찰면에 Zn/Al 금속용사 방청처리 한 고력볼트 접합부를 대상으로 마찰면의 표면처리방법과 피막두께를 주요 변수로 하여 인장시험을 실시하였고, 실험으로 부터 마찰면 표면거칠기와 미끄럼계수를 측정하였다. 무도장 샌드블라스트 처리한 접합부 및 샌드블라스트 처리 후 금속용사를 실시한 볼트 접합부의 미끄럼 계수는 국내 규준의 규정 값과 비교하여 동등 이상의 우수한 미끄럼계수 값을 나타냈다.

• 대한건축학회논문집:구조계
• /
• 제35권12호
• /
• pp.149-156
• /
• 2019

Recently, skyscraper building and apartment fires, which were rapidly spread out from a low floor to a rooftop, have become a frequent occurrence in mass media. This fire problems have a fatal disadvantage that the exterior wall finish of the building emits toxic gas in case of fire by using dry bit method or organic insulating material. Therefore, in order to remedy these problems, many exterior wall finishing construction methods have been proposed, but the current trend is to use existing construction methods due to problems such as economy, weight, and durability. On the other hand, in countries such as Germany and Japan, ceramic sidings are used as exterior finishing material for buildings, which is environmentally friendly, excellent natural beauty, long life, easy maintenance and high-quality exterior materials. However, those ceramic sidings have still the problems such as manufacturing cost and weight problem because of boosting the sintering temperature up to 1,350℃ or more. Also, conventional CRC, MgO, FRP sidings which are composed of pulp, glass fiber and organic materials, have been reports of deformation due to ultraviolet rays, discoloration, corrosion and scattering, surface rupture, lifting and peeling. Therefore, in this study as an alternative to solve this problem, halosite nano kaolin produced in Sancheong in Korea and frit flux were used to satisfy the required properties as ceramic siding using low temperature sintering (below 1,000℃) and lightweight materials such as pearlite. This study aims to design the optimal formulation and process of materials and to study the characteristics of nano-coated ceramic siding material development and to present relevant basic data. The findings show that ceramic siding for nanocoated building materials is excellent as a natural ceramic siding building material. The fire resistance of natural minerals and nano particle refining technology satisfy the bending strength of 80kgf / cm2, the volume ratio of 2.0 and the absorption rate of less than 10.0%.

• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.25-30
• /
• 2015

직경 20 nm 미만의 금속 나노입자들이 나타내는 저온 용융특성을 이용한 새로운 패드 피니쉬 공정을 적용하여 Cu 표면을 SAC305로 코팅한 후 wettability의 변화를 평가하였다. SAC305 잉크를 사용한 $160^{\circ}C$의 저온 코팅공정 시 형성되는 SAC305 코팅층의 두께는 수 나노미터 수준으로 극히 얇았으며, 이 코팅층 밑으로 10~100 nm 두께 수준의 $Cu_6Sn_5$ 및 50~150 nm 두께 수준의 $Cu_3Sn$ 금속간화합물층 반응층이 생성되었음을 확인할 수 있었다. 즉, 생성된 금속간 화합물층의 두께는 압연동 시편에 비해 전해도금동 시편에서 훨씬 두꺼웠는데, 이는 전해도금동 시편에서 관찰되는 향상된 표면 거칠기 특성에 의해 단위면적 기준으로 보다 많은 수의 SAC305 나노입자들이 접촉된 상태에서 용융되어 반응하기 때문으로 분석되었다. 이후 SAC305 솔더볼을 사용한 젖음각 측정 실험에서 저온 SAC 코팅이 이루어진 Cu 표면은 SAC 코팅이 없는 Cu 표면에 비해 눈에 띄게 낮은 젖음각을 나타내어 당 코팅법으로 Cu 표면에 단지 수 나노미터 두께의 SAC305 층을 형성시킨 경우에서도 솔더의 wettability 개선을 유도할 수 있음을 확인할 수 있었다.

• 한국잠사곤충학회지
• /
• 제27권2호
• /
• pp.54-63
• /
• 1985

최근 필자가 견직물방추 가공하기 위해 개발한 acryl 합성수지를 합성섬유와 견직물가공된 것이 정전기발생에 어떠한 영향을 미치는가를 알기 위해 실행했다. 본 실험조건은 다음과 같다. (A) 사용가공처리제는 0.5% acryl polymer 525였다(자가제). (B) 각 직물에 대한 정전기 대전압은 K.S. 규격마찰 검사(KS K 0555) 방식에 따라 했다. (C) 마찰대상 직물로서는 K.S. 표준규격 KS K 0905 cotton, nylon, polyester와 공시직물로 했다. (D) 시료로서 silk, nylon, polyester 및 acryl 직물을 상기 합성수지 가공한 것과 안한 것을 구분해서 정전기 대전압을 조사했다. (E) 가공한 것과 가공하지 않은 시료별로 K.S. 표준규격(KS K 0465) 방식에 의해 세탁했다. 이와 같은 조사로 인하여 여러 가지 흥미있는 결과를 얻었는데 그 결과는 다음과 같다. 1. polyster를 제외하고는 silk, bylon, acryl 직물의 가공직물의 대전압이 가공하지 않은 것의 대전압보다 높았다(Table 5참조). 2. 가공한 polyester 직물의 K.S. polyester에 대한 대전압이 현저하게 감소하였다. 3. 견직물의 대전성은 흠이 없는데도 불구하고 높게 나왔는데 그 이유로서는 견직물의 결점이 마찰에 약하다는 성질과 마찰에 의한 K.S. 표준검사규격이 마찰에 강한 합성섬유를 대상으로 되어서 견직물에는 부적합한데 있다. 4. 동질섬유직물간의 마찰로 인한 대전압이 이질섬유직물간이 대전압보다 작게 나왔다. 5. 정전기 대전압은 세탁반복에 따라 증가하였다. 6. 많은 조사 결과가 Contact Electrification Series 원칙에 준하고 있는 사실, 즉 series상 피차 멀리 배치될수록 마찰대전압이 높아지고 있었다(Fig. 6 참조). 7. 이러한 조사 결과는 정전기 발생에 관하는 한 혼방사작업에 문제점으로 될 것이다. 8. 또한 견직물 가공에 임해서도 정전기 대전압이 가공으로 인해 증가할 것이라는 문제를 잊어서는 안 된다.