• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.1-6
• /
• 1997

Water repellent finish was carried out using water repellent agent(AG-480), melamine resin(Sumitex Resin MK), and catalyst(Sumitex Accelerator ACX). PET/nylon fabrics were treated with melamine resin by pad-dry-cure method and subsequently washed and dried. Durable water repellency was controlled by the melamine resin and catalyst. Water repellency was tested by spray rating method and durability of water repellency were measured by launder-O-meter and pilling tester. The optimum conditions of durable water repellent finish for new synthetic fabric were as follows; concentration of water repellent finishing agent 20g/l; concentration of melamine & catalyst 0.5g/l; curing condition $160^{\circ}$ ${\times}$ 30sec. Water repellency after washing and rubbing is improved by melamine resin and catalyst.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.100-106
• /
• 2011

UV-curable water-repellent finish was carried out to impart one-side repellency to the PET fabrics using a formulation of a UV-active fluorocarbon agent and a water soluble photoinitiator. The aqueous formulation was padded on the PET fabrics and it was subsequently UV-cured. The unirradiated side of the cured fabrics was made to wetteable to water by the prolonged UV/ozone irradiation. The influence of photoinitiator concentration, agent concentration and UV energy for photodegradation on the performance of the finished fabrics were investigated. The difference in the functional property of front and back sides was examined by measuring water repellency at each side of the treated fabrics, which resulted in four rating difference between two-side. The UV-cured and photodegraded PET surfaces were characterized by ATR, ESCA and FE-SEM.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04a
• /
• pp.687-690
• /
• 2002

In this paper, we present a novel semaphore implementation scheme which shortens finish time of high priority tasks and improves reliability of a system. The real-time systems have time constraints. Especially, the task with hard real-time constraints must meet its deadline. Consequently, managing shared resources is considered guaranteeing mutual exclusion as well as meeting task's deadline under unfavorable condition. According to the number and sort of the locked semaphores under the event occurred, this paper presents the reduction of the finish time of high priority task by decision whether the context switched or not. The experimental results show that the proposed method gives performance improvements in finish time of high priority tasks of about 11% over zuberi[4] method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.57-58
• /
• 2014

For durability design to protect against chloride-induced corrosion, it is important to estimate the amount of chlorides on the surface. However, it is difficult to estimate the airborne chlorides, a boundary condition, due to the difference between the amount of chlorides attached to a surface of an actual structure and that in the air. Therefore, in this study the attachment rate analysis of airborne chlorides was evaluated for 13 types of finish materials. As a result, despite differences in the amount of airborne chlorides according to the finishing type, it was found that 60 percent of airborne chlorides were attached to mortar, 30 percent were attached to steel, and 25 percent were attached to tiles compared with the amount of chlorides in the air.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.2 no.2
• /
• pp.137-154
• /
• 2000

The purpose of this study is to investigate the transition of luster material after the tweentieth century. This study was conducted by means of designer collection, journal of fashion, museum data, fabric exhibition and Internet data. The results of this study were as follows: Before the synthetic fiber period, the luster materials were used satin, chamuse, gauze, damask brocade and velvet, except cashmere, mohair and rayon. They are made from silk by the way of giving difference surface property. But since 1960s, it has used not only synthetic fiber with smooth surface but also vinyl, latex, natural leather, synthetic leather and metal. Luster material recently has a tendency to natural and soft shiny, example silket finish, chintz finish, silico coating finish with paper touch feel and so forth.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.16-27
• /
• 2006

The purpose of this study was to examine the effects of chemical finishes on performance characteristics of microfiber blend fabrics. A 60% polyester microfiber /40% cotton blend woven fabric was finished by ten chemicals: three silicone softeners, one fluorochemical, and their mixtures. Performance characteristics examined were fabric hand attributes. Fabric hand was evaluated by instrumental measures using Kawabata KES-F system instruments. Silicone-only finishes did not change the bending properties significantly from those of the control fabric. The fluorochemical-only finish made the fabric stiffer and crisper. When the two chemicals were mixed they tended to offset this adversary effect. Most of the chemical finishes made the surface finer and smoother. Fluorochemical-only finish improved fabric strength. Likewise, dimethylpolysiloxane silicone improved fabric strength. Amino-functional hydrophilic and diamino-functional silicone softeners, on the other hand, reduced fabric strength. However, when mixed with the fluorochemical, the adversary effect was diminished.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.208-210
• /
• 1999

A new additive for semi-brightness finish in nickel electroplating, having a quarternary ammonium salt structure, has been developed in this study. The effectiveness of the new additive was tested in laboratory-scale eletroplating tests as well as in a full-scale factory plating line. An examination of the plated surface showed that the new additive is as good as the one produced by the most commonly used additive in the nickel plating industry. The plated surface was examined by SEM, EPMA, and Reflectance Spectroscopy, and was found to be compatible to the one obtained with commercial additives. The new additive has a shelf life comparable with those of other commercially available additives. The additive developed in this study has an excellent potential to be used commercially.

• Steel and Composite Structures
• /
• v.17 no.5
• /
• pp.687-704
• /
• 2014

A great number of moment-resisting steel structures collapsed due to ductile crack initiation at welded beam-column connections, followed by explosive brittle fracture in the Kobe (Hyogoken-Nanbu) earthquake in 1995. A series of experimental and numerical studies on cracking behaviors of beam-column connections in steel bridge piers were carried out by the authors' team. This paper aims to study the effect of post weld treatment on cracking behaviors of the connections during a strong earthquake event. Experiments of three specimens with different weld finishes, i.e., as-welded, R-finish, and burr grinding, were conducted. The experimental results indicate that the instants of ductile crack initiation are greatly delayed for the specimens with R-finish and burr grinding finishes compared with the as-welded one. The strain concentration effect in the connection is also greatly reduced in the specimens with post weld treatment compared with the as-welded one, which was also verified in the tests.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.554-562
• /
• 2007

This study determined tact process paths by separating the finish works according to the properties of work areas and work relations in order to apply the tact schedule management to the finish works. In addition, by suggesting preparing and sharing the workflow charts, the experiments can be shared between the executors and any possible frictions between the specialist works can be identified in advance. In addition, any errors on the plan can be reviewed and modified through the measurement stage of tact plan attainment rate. The process of tact schedule management is improved with such tools and methods and the efficiency of the process through the application of cases was verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.177-183
• /
• 1994

The ball-end milling process is widely used in the die/mold industries, and it is very suitable for the machining of free-from surfaces. However, cusps(or scallops) remaining at the machined part along the cutter paths require anothe finish process such as polishing or grinding. In this study, a high sped micro ball-end milling method has been suggested for the finish of free- form surfaces. A new tool path which makes the geometrical roughness of workpiece be constant through the machined surface has been developed. In the high speed machining of micro ball-end muling experimets, the developed tool paths have been successfully applied. And it was concluded that the surface roughness from this finish cuts of micro ball-end milling process was acceptable.