• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.577-586
• /
• 1993

Pesticide protective clothing has not been frequently worn due to its lack of thermal comfort. It is important to develop fabrics which can allow the wearer to work in comfort. One of the possible way to achieve the goal is to produce fabrics with a water- and oil-repellent finish which would resist pesticide penetration but maintain some breathability. The purpose of this study were to evaluate the pesticide barrier properties of untreated and water- and oil-repellent finished nonwoven fabrics. Three types of nonwoven fabrics(Tyvek, Sontara and Kimlon) were used as test specimens. By pad-dry-cure method, each of the specimen was treated with fluorocarbon. The pesticide barrier properties (amount of pesticide penetration and residue) were measured by the gas chromatography. The performance properties of untreated and treated specimens were evaluated with respects to water pepellency(KS K 0590), oil repellency(AATCC 118), water resistance(KS K 0591, AATCC 42), water vapor transmission (KS A 1013) and air permeability(KS K 0570). The results of this study were as follows : 1) The untreated Sontara showed much more amount of pesticide penetration than untreated Tyvek and Kimlon, while the treated Sontara showed little amount of pesticide penetration. 2) After laundering, the amount of pesticide residue in the untreated and treated Sontara was less than that in Tyvek and in Kimlon. 3) Water- and oil-repellent finish improved water repellency, oil repellency, and water resistance of specimens. 4) The untreated Sontara and Kimlon showed higher water vapor transmission and air permeability than untreated Tyvek. Water vapor transmission and air permeability of treated specimen decreased compared to those of untreated.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.38-43
• /
• 2007

This paper describes ultrasonically assisted grinding used to obtain a glossy surface quickly and precisely. High-quality surfaces are required for plastic injection molding dies used in the production of plastic parts such as dials for cellular phones. Traditionally, in order to finish the dies, manual polishing by a skilled worker has been required after the machining processes, such as electro discharge machining (EDM), which leaves an affected layer, and milling, which leaves tooling marks. However, manual polishing causes detrimental geometrical deviations of the die and consumes several days to finish a die surface. Therefore, a machining process for finishing dies without manual polishing to improve the surface roughness and form accuracy would be extremely valuable. In this study, a 3D positioning machine equipped with an ultrasonic spindle was used to conduct grinding experiments. An electroplated diamond tool was used for these experiments. Generally, diamond tools cannot grind steel because of excessive wear as a result of carbon atoms diffusing into bulk steel and chips. However, ultrasonically assisted grinding can achieve a fine surface (roughness Rz of $0.4{\mu}m$) on die steel without severe tool wear. The final aim of this study is to realize mirror surface grinding for injection molding dies without manual polishing. To do this, it is necessary to fabricate an electroplated diamond tool with high form accuracy and low run-out. This paper describes a tool-making method for high precision grinding and the grinding performance of a self-electroplated tool. The ground surface textures, tool performance and tool life were investigated A ground surface roughness Rz of 0.14 um was achieved Our results show that the spindle speed, feed rate and cross feed affected the surface texture. One tool could finish $5000mm^2$ of die steel surface without any deterioration of the ground surface roughness.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.2
• /
• pp.3-11
• /
• 2014

As the recent construction projects have been carried out as a mixed-use complex project that includes architecture, civil, mechanical, electrical, and landscape, as well as become bigger and high-rise with the increased repetitive works, the TACT technique has received more attention as an effective method for achieving a target completion date by securing the continuous works. Although the TACT technique can maintain a steady flow without the interruption of works in order to utilize the resources of the repetitive works, it can not be considered as the systematic scheduling technique because the schedule computations are not possible as well as a critical path can not be recognized. This paper proposes the applicabilities of scheduling and monitoring the TACT schedule by the BDM technique as comparing and analyzing the methodologies for apartment finish works by the Excel, the Primavera(P6) based on the PDM technique, and the Beeliner based on the BDM technique that is a new networking technique, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.7
• /
• pp.2610-2630
• /
• 2021

The aim of this paper is to propose the alternative algorithm to finish the process in public key cryptography. In general, the proposed method can be selected to finish both of modular exponentiation and point multiplication. Although this method is not the best method in all cases, it may be the most efficient method when the condition responds well to this approach. Assuming that the binary system of the exponent or the multiplier is considered and it is divided into groups, the binary system is in excellent condition when the number of groups is small. Each group is generated from a number of 0 that is adjacent to each other. The main idea behind the proposed method is to convert the exponent or the multiplier as the subtraction between two integers. For these integers, it is impossible that the bit which is equal to 1 will be assigned in the same position. The experiment is split into two sections. The first section is an experiment to examine the modular exponentiation. The results demonstrate that the cost of completing the modular multiplication is decreased if the number of groups is very small. In tables 7 - 9, four modular multiplications are required when there is one group, although number of bits which are equal to 0 in each table is different. The second component is the experiment to examine the point multiplication process in Elliptic Curves Cryptography. The findings demonstrate that if the number of groups is small, the costs to compute point additions are low. In tables 10 - 12, assigning one group is appeared, number of point addition is one when the multiplier of a point is an even number. However, three-point additions are required when the multiplier is an odd number. As a result, the proposed method is an alternative way that should be used when the number of groups is minimal in order to save the costs.

• Korean Journal of Metals and Materials
• /
• v.47 no.9
• /
• pp.523-532
• /
• 2009

In this study, four API X80 linepipe steel specimens were fabricated with varying cooling rates and finish cooling temperatures, and their microstructures and crystallographic orientations were analyzed to investigate the effects of cooling conditions on their tensile and Charpy impact properties. All the specimens consisted of acicular ferrite, granular bainite, and secondary phases such as martensite and martensiteaustenite constituent. The volume fraction of secondary phases increased with increasing cooling rate, and the higher finish cooling temperature resulted in the reduction in volume fraction and grain size of secondary phases. According to the crystallographic orientation analysis data, the effective grain size and unit crack path decreased as fine acicular ferrites having a large amount of high-angle grain boundaries were homogeneously formed, thereby leading to the improvement of Charpy impact properties. The specimen fabricated with the higher cooling rate and lower finish cooling temperature had the highest upper shelf energy and the lowest energy transition temperature because it contained a large amount of fine secondary phases homogeneously distributed inside fine acicular ferrites, while its tensile properties well maintained.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.28 no.2
• /
• pp.45-55
• /
• 2022

Background: This study compared the effects of trunk stabilization exercise and hip joint exercises on the range of motion of the lumbar spine, pain severity, and severity of disability in patients with chronic lower back pain. Methods: A total of 30 participants were enrolled and divided into group 1 (n=10), group 2 (n=10), and group 3 (n=10) were performed by each group thrice a week for a total of 8 weeks. Group 1 performed warm-up exercise (15 min), trunk stabilization exercise (25 min), finish-up exercise (15mins). Group 2 performed warm-up exercise (15 min), hip exercise (25 mins, finish-up exercise (15mins). Group 3 warm-up exercise (15 min), trunk stabilization and hip exercise (25 min), Finish-up exercise (15 min). Participants were assessed for the range of motion of the lumbar spine, pain severity (visual analog scale score; VAS), and severity of disability (Oswestry disability index score; ODI) before and after the interventions. Results: All three groups showed a significant increase in the range of motion of the lumbar spine, but there was no significant difference among the groups. Moreover, the severity of pain and ODI were significantly decreased in all groups; however, the intergroup differences were non-significant. Conclusion: The results from this study confirmed the effectiveness of trunk stabilization and hip joint exercise in improving the lumbar range of motion, pain severity, and chronic lower back pain in patients. Thus, trunk and pelvic stabilization exercises and hip joint exercise can be used as clinical practices to treat and prevent chronic lower back pain.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.9
• /
• pp.1279-1287
• /
• 2009

Concentrated livestock production has led to soil nutrient accumulation concerns. To reduce the environmental impact, it is necessary to understand current recommended livestock feeding practices. Two experiments were conducted to compare the effects of trace mineral supplementation on performance, carcass composition, and fecal mineral excretion of phase-fed, grow-finish pigs. Crossbred pigs (Experiment 1 (Exp. 1), (n = 528); Experiment 2 (Exp. 2), (n = 560)) were housed in totally-slatted, confinement barns, blocked by weight, penned by sex, and randomly assigned to pens at approximately 18 kg BW. Treatments were allocated in a randomized complete block design (12 replicate pens per treatment) with 9 to 12 pigs per pen throughout the grow-finish period. In Exp. 1, the control diet (Io100) contained Cu as $CuSO_{4}$, Fe as $FeSO_{4}$, and Zn (of which 25% was ZnO and 75% was $ZnO_{4}$) at concentrations of 63 and 378 mg/kg, respectively. Treatment 2 (O100) contained supplemental Cu, Fe, and Zn from organic sources (Bioplex, Alltech Inc., Nicholasville, KY) at concentrations of 19, 131, and 91 mg/kg, respectively, which are the commercially recommended dietary inclusion levels for these organic trace minerals. Organic Cu, Fe, and Zn concentrations from O100 were reduced by 25% and 50% to form treatments 3 (O75) and 4 (O50-1), respectively. In Exp. 2, treatment 5 (Io25) contained 25% of the Cu, Fe, and Zn (inorganic sources) concentrations found in Io100. Treatment 6 (O50-2) was identical to the O50-1 diet from Exp. 1. Treatment 7 (O25) contained the experimental microminerals reduced by 75% from concentrations found in O100. Treatment 8 (O0) contained no trace mineral supplementation and served as a negative control for Exp. 2. In Exp. 1, tenth-rib backfat, loin muscle area and ADG did not differ (p>0.05) between treatments. Pigs fed the control diet (Io100) consumed less feed (p<0.01) compared to pigs fed diets containing organic trace minerals, thus, G:F was greater (p = 0.03). In Exp. 2, there were no differences among treatment means for loin muscle area, but pigs fed the reduced organic trace mineral diets consumed less (p<0.05) feed and tended (p = 0.10) to have less tenth-rib backfat compared to pigs fed the reduced inorganic trace mineral diet. Considering that performance and feed intake of pigs was not affected by lower dietary trace mineral inclusion, mineral excretion could be reduced during the grow-finish phase by reducing dietary trace mineral concentration.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.91-91
• /
• 2011

폴리프로필렌(PP)은 고결정성 범용수지로서 염색성, 내열성, 촉감 등의 문제로 의류용 소재로는 부적합하여 초기에는 카펫용 섬유로서 가염형 폴리프로필렌 섬유가 상업화 되었지만 성공하지는 못하였다. 그 후, 섬유 산업도 의류용 외의 산업자재, 생활 자재 분야 등이 성장함에 따라, 폴리프로필렌 섬유의 수요가 확대되었다. 최근들어 스포츠 액티브 의류가 일반의류 트렌드로 들어오면서 기능성 섬유가 요구되고 이 분위기에 맞춰 다시 한번 폴리프로필렌 섬유의 의류화가 요구되는 시점이 되었으며 섬유중 에너지 소비량이 가장 적고, 쉽게 재용해할 수 있으며 소각시 유해 가스발생량이 매우 적은 특징등이 있기 때문에 지구 환경보호의 입장에서 폴리프로필렌 섬유가 재검토되고 있다. 이번 실험은 분산염료를 이용하여 농도별, 온도별, 시간별, 후처리시 시간과 온도의 변화로 가염 PP/PET 섬유의 염색특성을 알아보기 위해 실험 진행하였다. 실험에 사용되는 시약은 1급으로, $CH_3COOH$, NaOH, $Na_2S_2O_4$이며, 조제는 분산제, 정련제를 사용하였다. 먼저 온도별 실험에서 $40^{\circ}C$에서 승온하여 각각 $100^{\circ}C$, $110^{\circ}C$, $120^{\circ}C$, $130^{\circ}C$에서 온도에 따라 염색되는 정도를 알아보았다. 가장 높은 흡진을 보이는 온도에서 각각 40min, 50min, 60min, 70min 염색 유지시간 실험을 하여 염색이 안정되는 시간을 측정하였다. 위의 실험 결과 최적의 조건으로 염색농도에 따른 Build up 실험을 진행하였다. 가염 PP/PET 섬유는 일반 Polyester처럼 $120{\sim}130^{\circ}C$에서 가장 높은 염색농도 값(K/S)을 보인다. 또한 $130^{\circ}C$에서의 유지시간에서는 50 min 이상 진행시 더 이상의 흡진이 없거나, 염료의 탈락이 있음을 알수 있다. Build up 실험에서는 8.0%까지 실험하였지만, 결과는 그 이상농도를 사용하여도 염색은 가능함을 알 수 있었다. 후처리에 대한 실험에서 염료에 따라 차이가 있지만 크게 영향을 받지 않는 것으로 보이며, 제품성 평가 결과를 보면 후처리를 했을 경우 견뢰도가 우수한 것을 알 수 있었다.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.15-19
• /
• 2015

We demonstrated an inspection system for detecting discoloration of PCB Cu ball pad with an OSP surface finish. Though the OSP surface finish has many advantages such as eco-friendly and low cost, however, it often shows a discoloration phenomenon due to a heating process. In this study, the discoloration was analyzed with device-independent CIELAB color space. First of all, the PCB samples were inspected with standard lamps and CCD camera. The measured data was processed with Labview program for detecting discoloration of Cu ball pad. From the original PCB sample image, the localized Cu ball pad image was selected to reduce the image size by the binarization and edge detection processes and it was also converted to device-independent CIELAB color space using $3{\times}3$ conversion matrix. Both acquisition time and false acceptance rate were significantly reduced with this proposed inspection system. In addition, $L^*$ and $b^*$ values of CIELAB color space were suitable for inspection of discoloration of Cu ball pad.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.597-601
• /
• 2006

There are considerable amount of man power and time spent for analysis and selection of various materials due to the inadequate application system and rapid searching process of material related information in each stage of building production process. Also, due to the insufficiency in recycling system of important information created for each process, they are hoarded at each task stage and project completion. As a result, because of the repetition of the similar/identical tasks on each process, it is the major reason for impeding the efficient employment of manpower of the company and decreasing competition of the company. Moreover, in selecting finish material in the project field, there are many difficulties due to the lack of technical information such as product characteristics and field applications. The construction quality also affects the profit and loss of the product which calls for a need to develop continued information management system that the finish material related examples could be shared in real time. The objective of this study is to propose a building finish material information which the real time research and application is possible to raise the productivity. TO do this, the current material information task status analysis and questionnaire research should be conducted to understand the demand of system development and reflect the result onto the system for easy access and application. Therefore, the building finish material information system for enhancement of productivity of construction task proposed in this study is expected to be utilized in enhancement of construction quality, maximization of company profit, and strengthening of company competition.