• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.383-394
• /
• 2023

In Korea, the U.S. Tier-4 Final emission standards have been applied to agricultural machinery since 2015. This study was conducted to analyze the emission characteristics of agricultural tractors during plow tillage operations using PEMS (portable emissions measurement systems). The tractor working speed was set as M2 (5.95 km/h) and M3 (7.60 km/h), which was the most used gear stage during plow tillage operation. An engine idling test was conducted before the plow tillage operation was conducted because the level of emissions differed depending on the temperature of the engine (cold and hot states). The estimated level of emissions for the regular area (660 m²), which was the typical area of cultivation, was based on an implement width of 2.15 m and distance from the work area of 2.2 m. As a result, average emission of CO (carbon monoxide), THC (total hydrocarbons), NOx (nitric oxides), and PM (particulate matter) were approximately 6.17×10-2, 3.36×10^-4, 2.01×10^-4, and 6.85×10^-6 g/s, respectively. Based on the regular area, the total emission of CO, THC, NOx, and PM was 2.62, 3.76×10^-2, 1.63, and 2.59×10^-4 g, respectively. The results of total emission during plow tillage were compared to Tier 4 emission regulation limits. Tier 4 emission regulation limits means maximum value of the emission per consumption power (g/kWh), calculated as ratio of the emission and consumption power. Therefore, the total emission was converted to the emission per power using the rated power of the tractor. The emission per power was found to be satisfied below Tier 4 emission regulation limits for each emission gas. It is necessary to measure data by applying various test modes in the future and utilize them to calculate emission because the emission depends on various variables such as measurement environment and test mode.

• Journal of KIISE:Databases
• /
• v.32 no.4
• /
• pp.452-472
• /
• 2005

We propose XIR-Branching, a novel method for processing partial match queries on heterogeneous XML documents using information retrieval(IR) techniques and novel instance join techniques. A partial match query is defined as the one having the descendent-or-self axis '//' in its path expression. In its general form, a partial match query has branch predicates forming branching paths. The objective of XIR-Branching is to efficiently support this type of queries for large-scale documents of heterogeneous schemas. XIR-Branching has its basis on the conventional schema-level methods using relational tables(e.g., XRel, XParent, XIR-Linear[21]) and significantly improves their efficiency and scalability using two techniques: an inverted index technique and a novel prefix match join. The former supports linear path expressions as the method used in XIR-Linear[21]. The latter supports branching path expressions, and allows for finding the result nodes more efficiently than containment joins used in the conventional methods. XIR-Linear shows the efficiency for linear path expressions, but does not handle branching path expressions. However, we have to handle branching path expressions for querying more in detail and general. The paper presents a novel method for handling branching path expressions. XIR-Branching reduces a candidate set for a query as a schema-level method and then, efficiently finds a final result set by using a novel prefix match join as an instance-level method. We compare the efficiency and scalability of XIR-Branching with those of XRel and XParent using XML documents crawled from the Internet. The results show that XIR-Branching is more efficient than both XRel and XParent by several orders of magnitude for linear path expressions, and by several factors for branching path expressions.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.597-616
• /
• 2013

Character industry is not only knowledge-based industry chiefly with copyrights but also motive power for creative economy to take a role functionally over the fields of industries because it has industrial characteristic as complement product to promote sale value in manufacturing industry and service industry and increase profit on sales. Since 2003, the national policy related to character has aimed to maximize effect among connected industries, extend its business abroad, enforce copyrights through the improvement of marketing system, develop industrial infrastructure through raising quality of character products. With the result of this policy, the successful cases of connected contents have been crystallized and domestic character industry has stepped up methodically since 2007. It is needed to reset the scales of character industry and industrial stats because there are more know-how of self industry promotion and more related characters through strategy of market departmentalization starting with cartoon, animation, games, novels, movies and musicals. Especially, The Korea government set our target for 'Global Top Five Character Power' since 2009 and has started to carry out to find global star characters, support to establish network among connected industries, diversify promotion channels, and develop licensing business. Particularly, since 2013, There have been prospered the indoor character theme park with time management just like character experimental marketing or Kids cafes using characters, the demand market of digital character focusing on SNS emoticon, and the performance market for character musical consistently. Moreover, The domestic and foreign illegal black markets on off-line have been enlarged, so we need another policy alternative. To prepare for the era of exploding character demand market and diversifying platform, it is needed to set up a solid strategy that is required the elements of policy changes in character industry to vitalize character industry and support new character design and connected contents. the following shows that the elements of policy changes related to the existing policy, the current position of market. Nowadays, the elements of policy changes in domestic character industry are that variety of consumers in the digital character market according to platform diversification, Convergence contents of character goods for the Korean waves, legalization of the illegal black contents market, and controling the tendency of consumers in departmentalized market. This can help find the policy issue entirely deferent with the existing character powers like US, Japan or Europe. In its final analysis, the alternatives are the promotion of models with contract copyrights of domestic and foreign connected contents, the diversification of profit models of platform economy, the additive development of target market related to enlarging the Korean waves, and the strategy of character market for the age-specific tendency according to developing character demand market.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.1
• /
• pp.55-60
• /
• 2013

BACKGROUND: The buds of persimmon trees are susceptible to cold damage, often with the late frost, at the time of budburst. This study was conducted to determine effect of the cold damage on shoot and fruit growth the current season. METHODS AND RESULTS: 'Fuyu' trees, grown in 50-L pots, were placed for 1 h at $-2.2{\pm}0.5$, $-2.6{\pm}0.5$, or $-3.0{\pm}0.5^{\circ}C$ within a cold storage, at their budburst on April 5. Some trees under ambient temperature at $10-17^{\circ}C$ served as the control. Cold damage of the buds containing flower buds was 54% at $-2.2^{\circ}C$, and significantly increased to 95% at $-3.0^{\circ}C$. The bud damage included the complete death of all, complete death of main buds only, or the late and deformed shoot growth in the spring. Number of flower buds in early May dramatically decreased as the damage ratio increased. Since the thinning of flower buds in mid-May and fruitlets in early July was done in no or slightly damaged trees, the final number of fruits and yield did not decrease compared with the control when the damage increased by 60% and 70%, respectively. Average fruit weight and skin coloration tended to be better with increasing bud damage. Shoot growth was more vigorous in those trees whose buds were severely damaged by low temperature. CONCLUSION(S): Shoot growth and the yield may depend on the number of flower buds and percent fruit set after the cold damage.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.1
• /
• pp.73-78
• /
• 2014

This study was carried out to establish the self-specification and shelf-life by standardization of manufacturing process for Tenebrio molitor larvae. First, standardization of manufacturing process for T. molitor was set up. Sterilization for larvae placed on a multistage shelf with intervals of about 10 cm was carried out at $115^{\circ}C$, $1kgf/cm^2$ for 10 min. After sterilization, T. molitor larvae were frozen at less than $-35^{\circ}C$ for more than 12 hrs. And then, they were dried under $-15^{\circ}C$, 0.5 torr vacuum for more than 30 hrs. Second, we decided self-specification for T. molitor larvae. Their moisture, acidity, peroxide, crude protein and crude fat level should be 5% or less, 3 mg/g or less, 30 meq/g or less, 45% or more, and 25% or more, respectively. Also, oleic acid, representative material, level was set up 11 ~ 16%. Third, we decided shelf-life by analysis of the physicochemical characteristic, sensory evaluation and microbial indicators. The final expiry date for lyophilized T. molitor larvae in PET bottle was calculated as 12 months from date of manufacture. We expect that optimal manufacturing process system, self-specification, and shelf-life proposed in this study can be used in industrial production of T. molitor as a novel food.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.72-78
• /
• 2010

Purpose: Too develop a flexible drill device that can be inserted into the shoulder joint so that arthroscopic transosseous suture repair for Bankart lesion is possible. Materials and Methods: We created a device composed of a flexible drill unit and a guide pipe unit. The flexible drill unit was made of flexible multifilament wires (1.2 mm in diameter) that was twisted into one cord so that it can flex in any direction and a drill bit (1.2 mm in diameter) that is attached onto one end of the flexible wire. The guide pipe unit was a 150 mm long metal pipe (2.0 mm in inner diameter and 3.0 mm in outer diameter), with one end bent to 30 degrees. The flexible drill set was inserted into the shoulder joint through the posterior portal of the joint. The guide pipe component was placed onto the medial wall of the glenoid so that the pipe was placed 5 mm posterior to the margin of the anterior glenoid rim. The flexible drill was driven through the glenoid by the power drill so that holes were made in the glenoid. A non- absorbable suture was passed through the hole. Tying of a sliding knot tying was accomplished over the capsule and labrum after making a stitch through the capsule and labrum with a suture hook loaded with suture passer. The same procedures were done at the 2 and 4 O'Clock positions of the glenoid. Results: Five cases with Bankart lesion received arthroscopic transosseous repair with our flexible drill device. There were no intraoperative problems. Neither redislocation nor subluxation was reported at final follow-up. Conclusion: Arthroscopic transosseous suture repair without suture anchors and easy tying of a sliding knot are possible with a flexible drill set.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.211-217
• /
• 2010

This study was conducted to investigate a proper method of ball mark repair by comparing the creeping bentgrass recovery speed on golf course green treated by various methods of ball mark repair. Nine general repairing methods were tested and compared; control (no repair, A type), two common methods of USGA (B type) and GCSAA (C type), three methods with fork shaped hand set performing at Korean golf courses (Ansung Benest, D; Sky72, E; Lakeside, F type), and three methods using the repair machine with 6, 8, or 14 teeth (G, H, I type, respectively). Three creeping bentgrass cultivar of 'Penncross', 'T-1', and 'CY-2' were tested in this field experiment. This test was carried out from September to November in 2009 at the nursery on the Seoul Lakeside Golf course. The average speed of turfgrass recovery after various ball mark repairing methods have been ranked as in the order of E, D, C, B, F, I, H, G, and A. The methods of hand practise showed more effective results than repair method using machines. The ball mark recovery speeds of 'Penncross' were in the order of E, D, B, C, F, I, H, and A. In the case of 'T1' and 'CY-2', similar orders were showed as D, E, B, F, C, H, I, A, G and the order of D, E, C, F, B, H, G, I, A, respectively. The ball mark recovery speed among creeping bentgrass cultivar resulted in the order of 'CY-2', 'Penncross', and 'T-1'. The most proper method of ball mark repair was repair method using a hand set tool especially the method of the Sky72 Golf course (E type). At the first, remove a damaged grass area with fork and tap. And then gather the side grasses into the center area with pulling the grasses with fork. After that, make harden and flat on the turf surface by pounding and rolling with the round wooden stick. The final Nstep, water the repaired grass surface. This ball mark repairing practise showed a most rapid and proper recovery method on creeping bentgrass green.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.64-80
• /
• 2018

In Korea, citizens can only know general information about crime. Thus it is difficult to know how much they are exposed to crime. If the police can predict the crime risky area, it will be possible to cope with the crime efficiently even though insufficient police and enforcement resources. However, there is no prediction system in Korea and the related researches are very much poor. From these backgrounds, the final goal of this study is to develop an automated crime prediction system. However, for the first step, we build a big data set which consists of local real crime information and urban physical or non-physical data. Then, we developed a crime prediction model through machine learning method. Finally, we assumed several possible scenarios and calculated the probability of crime and visualized the results in a map so as to increase the people's understanding. Among the factors affecting the crime occurrence revealed in previous and case studies, data was processed in the form of a big data for machine learning: real crime information, weather information (temperature, rainfall, wind speed, humidity, sunshine, insolation, snowfall, cloud cover) and local information (average building coverage, average floor area ratio, average building height, number of buildings, average appraised land value, average area of residential building, average number of ground floor). Among the supervised machine learning algorithms, the decision tree model, the random forest model, and the SVM model, which are known to be powerful and accurate in various fields were utilized to construct crime prevention model. As a result, decision tree model with the lowest RMSE was selected as an optimal prediction model. Based on this model, several scenarios were set for theft and violence cases which are the most frequent in the case city J, and the probability of crime was estimated by $250{\times}250m$ grid. As a result, we could find that the high crime risky area is occurring in three patterns in case city J. The probability of crime was divided into three classes and visualized in map by $250{\times}250m$ grid. Finally, we could develop a crime prediction model using machine learning algorithm and visualized the crime risky areas in a map which can recalculate the model and visualize the result simultaneously as time and urban conditions change.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.1
• /
• pp.260-279
• /
• 2021

The Goguryeo kingdom established a unique defense system centered on a series of mountain fortresses. However, modern-day studies on its defense system have tended to focus on how they were positioned and generally consist of little more than individual surveys or introductions to the relevant materials, leaving much to be desired. This study attempts to extend the scope of studies about fortresses dating back to the Goguryeo period, taking into account the limitations of the available materials. As such, this study reviews the defense system of Goguryeo during the Gungnaeseong Period (i.e., the period when Gungnaeseong was the capital of Goguryeo) using the GIS system, with the focus on fortresses that are thought to have been built in the area extending from the middle and upper reaches of the Amnok River to the mid-stream region of the Liohe River, based on the aforementioned studies. The results of the study are as follows. First, the major roads built during the Gungnaeseong Period were as stated in the foregoing studies to some extent. Researchers believed that during the middle period of the dynasty, a major road ran along the Suzihe, Fuer and Xinkai rivers before finally reaching Jian. The study found that fortified walls and fortress strongholds were built along this road. Second, there were seven fortresses between the middle and upper reaches of the Amnokgang River and the midstream region of the Liaohe River. A primary defense line was closely established between the strongholds and the nearby walls, with secondary and tertiary defense lines established more loosely and encompassing a much wider area. Third, regarding the defense system along the major roads, the Choejinbosanseong, Goisanseong and Cheolbaesanseong fortresses served as strongholds along the 60-kilometer-long primary defense line, with 80-kilometer-long secondary and tertiary defense lines set up behind it. The final 120-kilometer-long defense line of the capital was established along with the Onyeosanseong Fortress, while a stumbling block was set up close to the capital as a defense system, rather than building a fortified wall. To summarize, a primary defense system was established centered on a series of fortresses, with each stronghold maintaining a closely-knit defense system in connection with other nearby strongholds to repel invaders.

• Journal of Korea Water Resources Association
• /
• v.56 no.6
• /
• pp.403-417
• /
• 2023

In this research, a methodology was developed for constructing an appropriate rainfall image database for estimating rainfall intensity based on CCTV video. The database was constructed in the Large-Scale Climate Environment Chamber of the Korea Conformity Laboratories, which can control variables with high irregularity and variability in real environments. 1,728 scenarios were designed under five different experimental conditions. 36 scenarios and a total of 97,200 frames were selected. Rain streaks were extracted using the k-nearest neighbor algorithm by calculating the difference between each image and the background. To prevent overfitting, data with pixel values greater than set threshold, compared to the average pixel value for each image, were selected. The area with maximum pixel variability was determined by shifting with every 10 pixels and set as a representative area (180×180) for the original image. After re-transforming to 120×120 size as an input data for convolutional neural networks model, image augmentation was progressed under unified shooting conditions. 92% of the data showed within the 10% absolute range of PBIAS. It is clear that the final results in this study have the potential to enhance the accuracy and efficacy of existing real-world CCTV systems with transfer learning.