• Genes and Genomics
• /
• 제40권12호
• /
• pp.1331-1338
• /
• 2018

Although there have been plenty of dominance deviation analysis, few studies have dealt with multiple phenotypes. Because researchers focused on multiple phenotypes (final weight and backfat thickness) of Landrace pigs, the classification of the genes was possible. With genome-wide association studies (GWASs), we analyzed the additive and dominance effects of the single nucleotide polymorphisms (SNPs). The classification of the pig genes into four categories (overdominance in final weight, overdominance in backfat thickness and overdominance in final weight, underdominance in backfat thickness, etc.) can enable us not only to analyze each phenotype's dominant effects, but also to illustrate the gene ontology (GO) analysis with different aspects. We aimed to determine the additive and dominant effect in backfat thickness and final weight and performed GO analysis. Using additive model and dominance deviation analysis in GWASs, Landrace pigs' overdominant and underdominant SNP effects in final weight and backfat thickness were surveyed. Then through GO analysis, we investigated the genes that were classified in the GWASs. The major GO terms of the underdominant effects in final weight and overdominant effects in backfat thickness were ion transport with the SLC8A3, KCNJ16, P2RX7 and TRPC3 genes. Interestingly, the major GO terms in the underdominant effects in the final weight and the underdominant effects in the backfat thickness were the regulation of ion transport with the STAC, GCK, TRPC6, UBASH3B, CAMK2D, CACNG4 and SCN4B genes. These results demonstrate that ion transport and ion transport regulation genes have distinct dominant effects. Through GWASs using the mode of linear additive model and dominance deviation, overdominant effects and underdominant effects in backfat thickness was contrary to each other in GO terms (ion transport and ion transport regulation, respectively). Additionally, because ion transport and ion transport regulation genes are associative with adipose tissue accumulation, we could infer that these two groups of genes had to do with unique fat accumulation mechanisms in Landrace pigs.

• 한국초지조사료학회지
• /
• 제13권3호
• /
• pp.203-212
• /
• 1993

This experiments were carried out to estimate the optimum final cutting date in autumn and the selection of highly adaptable varieties in mountainous pastures of Taekwalyong area. The evaluations were based on the data of varietal differences of dry weight of plant(DW) and yield components of the 1st cutting as affected by various final cutting dates of last autumn. Nine varieties of tall fescue Barvetia, Fuego. Demeter, Safe. Barcel, Forager, Johnstone, Enforcer and Stef. were used and 4 final cutting date of autumn were $C_1$, cut on 30 Sept. $C_2$, on 14 Oct. $C_3$, on 28 Oct. and $C_4$. on 11 Nov.. respectively. The results obtained were as follows: I . Between the dry weight of plant(DM) and yield components of 1st cutting were different by various final cutting dates of autumn. The dry weight of plant(DW) was significantly positive correlated with heading characteristics of the 1st cutting in earlier cuttings($C_1- C_3$) of autumn, but there was not significant correlated with heading characteristics of the 1st cutting in the latest cutting($C_4$) of autumn. 2. The variety of Forager with heavier weight of heading tiller(HTW) and dry weight of tiller(WT) showed the highest dry weight of plant(DW) of the 1st cutting in earlier cuttings($C_1-C_3$) of autumn, whereas the variety of Barcel with high number of tillers per plant(NT) showed a high dry weight of plant(DW) of the 1st cutting in the latest cutting($C_4$) of autumn. 3. Optimum final cutting date and critical period of mountainous pastures in Taekwalyong area were estimated in late September($C_1$) and middle October($C_2$), sespectirety. 4. The dry weight of plant(DW) of the 1st cutting was significantly negative correlated with final cutting dates in growth period of autumn.

• 한국정밀공학회지
• /
• 제13권9호
• /
• pp.130-137
• /
• 1996

In the present paper the effect of various process conditions on the final weight of injection molded rectangular plates has been investigated in detail. The main parameters involved in the simulations were melt temperature, mold temperature, injection speed and packing pressure. The dimensions of the plate used were 100mm long, 2mm of width and polystyrene was used as a molding material. The shear viscosity of the polymeric material was treated as a function of shear rate, temperature and pressure through the whole processes including packing and cooling stages. By increasing a packing pressure the final weight of sample increased linearly. Furthermore, as the melt temperature, the mold temperature and the injection speed increased, the final weight of the injection molded plate decreased within the molding window.

• Fisheries and Aquatic Sciences
• /
• 제19권5호
• /
• pp.23.1-23.7
• /
• 2016

The effects of daily feeding frequency (Exp I), water temperature (Exp II), and stocking density (Exp III) on the growth of river puffer, Takifugu obscurus, juvenile fish of 10 and 40 g in body weight were examined to develop effective techniques to produce river puffer in a non-exchange water system. In Exp I, fish were fed commercial floating feed with 45 % protein one to five times per day to apparent satiation each by hand daily for 8 weeks at $25^{\circ}C$. In both the 10- and 40-g size groups, the final body weight, daily feed consumption, and weight gain of fish fed one meal per day were significantly lower than those of fish fed five meals per day (P < 0.05). However, there were no significant differences in the final body weight, daily feed consumption, and weight gain among fish fed two, three, and five meals per day. Feed efficiency showed decreasing tendency with increasing size of fish. In Exp II, fish of 10 and 40 g in initial body weight were reared with the commercial feed at $15-30^{\circ}C$ for 8 weeks. The weight gain of fish increased with raising water temperature up to $25^{\circ}C$ and decreased drastically at $30^{\circ}C$ for both sizes. The Q10 of specific growth rate was decreased with raising water temperature from 5.04 (temperature interval, $15-20^{\circ}C$) to 0.66 ($25-30^{\circ}C$) for the 10-g fish and from 4.98 to 0.31 for the 40-g fish. In Exp III, the effect of stocking density on growth was examined with fish of 10 and 40 g in initial body weight. The final body weight for initial stocking densities of 4, 8, and $12kg/m^3$ was significantly higher than that of $20kg/m^3$ for the 10-g fish, and the final stocking density reached 10.1, 19.2, 28.7, and $39.9kg/m^3$, respectively. For the 40-g fish, the final body weight for initial stocking densities of 3 and $6kg/m^3$ was significantly higher than that of 9 and $15kg/m^3$ and the final stocking density reached 7.38, 13.5, 17.1, and $27.5kg/m^3$, respectively (P < 0.05). In both groups, weight gain tended to decrease with increasing stocking density; however, survival showed no significant difference.

• 접착 및 계면
• /
• 제11권3호
• /
• pp.89-99
• /
• 2010

본 논문에서는 poly(vinyl acetate-co-ethylene)을 산화, 환원 방법으로 중합할 때 poly(vinyl alcohol) (PVOH)이 최종 에멀젼의 물성에 미치는 영향과 pH의 변화가 최종 에멀젼의 물성에 미치는 영향에 대하여 알아보았다. 실험 결과 PVOH의 분자량이 에멀젼 성질에 크게 영향을 미쳤다. 분자량이 낮은 PVOH 이용 시는 점도가 낮은 제품을 얻었고, 분자량이 큰 PVOH를 이용 시는 높은 점도의 제품을 얻었다. 그러나 pH를 변화 시키면서 중합한 제품의 최종 성질은 PVOH에 대하여 다른 결과를 얻었다. 일반적으로 중합도가 높고 부분 검화물의 PVOH를 이용한 poly(vinyl acetate) 에멀젼 최종점도는 상대적으로 매우 높은 점도를 유지하는 데 비하여, VAE 에멀젼에서는 높은 pH에서 합성 시에는 낮은 에멀젼의 점도를 얻었다. 이것은 에멀젼 합성 중에 PVOH의 분자량의 저하에 의한 영향으로 판단된다. pH가 증가 할수록 그라프트율이 감소하고, 분자량이 감소하면서 점도가 낮아진다는 결과를 얻었다.

• 한국초지조사료학회지
• /
• 제13권3호
• /
• pp.213-220
• /
• 1993

Tall fesuce 9 개 품종을 공시하여 가을철 예취시기를 달리했을 때 l 번초의 수량구성요소와 개체중에 미치는 영향을 조사하여 가을철 최종예취시기를 추정하고 이 지역의 환경조건에 적응성이 높은 품종 을 선발하려고 하였다. l. 가을철 예취시기에 따라서 l 번초의 개체중에 관여하는 수량구성요소의 차이가 인정되었는데 $C_1-C_3$의 l 번초 개체중은 출수관련형질들과 유의한 정상관이 인정되었으나 $C_4$의 1 번초 개체중에서는 유의한 상관이 인정되지 않았다. 2. $C_1C_3$에서는 출수경수가 많고 출수경중과 l 경중이 무거웠던 Forager의 개체중이 많았으나 $C_4$에서는 개체당 경수가 많았던 Barcel의 개체중이 많았다. 3. 대관령지역의 영년초지에서 가을철 최종예취시기의 한계는 $C_1$시기 (9월 30일) 로 추정되었으며 최종 예취시기의 위험기는 $C_2$시기 (10월 14일)의 전후로 추정되었다. 4. 1번초의 개체중은 가을철 예취시기와 유의한 부(負)의 상관을 나타내었다.

• 대한토목학회논문집
• /
• 제32권1C호
• /
• pp.17-25
• /
• 2012

석탄회를 주재료로 사용한 저강도 고유동화재는 다짐이 필요없고 재굴착이 용이한 고유동성의 재료로 개발되었다. 본 연구에서는 이를 구조물 뒤채움용으로 사용하기 위해 경량화에 초점을 맞춘 기포를 혼입한 경량기포 저강도 고유동화재의 기초연구로써 최종비빔시간, 기포의 희석비에 따른 공학적 특성을 규명하여 최적비빔시간 및 최적희석비를 결정하였다. 기준 배합비를 중심으로 최종비빔시간과 희석비에 따라 플로우 시험, 기포슬러리의 단위중량측정 시험 및 일축압축강도 시험을 실시하였다. 시험결과, CASE N(최종비빔 4분, 희석비 2%), CASE O(최종비빔 4분, 희석비 3%)가 유동성(20cm 이상), 경량성(12~15 $kN/m^3$) 및 일축압축강도(800~1200kPa) 기준을 만족하는 것으로 나타나 이를 기준으로 구조물 뒤채움용 경량기포 CLSM재료를 제작 및 사용함에 있어서 참고가 될 수 있을 것으로 판단된다.

• 한국초지조사료학회지
• /
• 제14권2호
• /
• pp.76-81
• /
• 1994

대관령 지역에서 Tall fescue 9개 품종을 공시하여 가을철 예취시기에 따른 2번초의 수량구성 요소와 개체중의 변화를 검토하여 이 지역의 환경조건에 적응성이 높은 품종을 선발하여고 하였으며, 얻어진 결과를 요약하면 다음과 같다. 1. 2번초에서 개체당 경수가 많은 품종(Barcel, Forager)이 개체중도 무거워서 이지역의 환경조건에 적응성이 높은 품종이라고 생각되었다. 2. 가을철 예취시기에 따른 2번초의 개체당 경수는 개체중과 0.1%의 유의한 정상관을 나타냈으나 1경중은 유의한 상관이 인정되지 않았다. 3. 2번초의 편균 개체중이 최대에 도달하는 가을철 예취시기는 $C_3$(10월28일)으로 추정되었다. 4. 2번초의 평균 개체중은 1번초의 평균 개체중과 반비례적인 관계를 나타내었다.

• 농업과학연구
• /
• 제49권1호
• /
• pp.93-102
• /
• 2022

This study was conducted to evaluation the effects of dietary soybean meal (SBM) and fermented soybean meal (FSBM) on the growth performance of Korean native cattle as Hanwoo calves (Bos taurus coreanae) and Holstein cows. In total, 16 calves three to four months old (Control group, SBM: 5 males and 3 females, average weight 105.7 kg; Experimental group, FSBM: 5 males and 3 females, average weight 103.7 kg) were fed 5% of the feed amount for 53 days. In terms of growth performance outcomes, the average gain body weight was significantly higher in the FSBM group than in the SBM group in the final fattening period. The average daily gain in body weight (ADGBW) for the FSBM group was higher than that of the SBM group in the final fattening period. The average gain body weight in four months for FSBM was higher than that at three months in the final fattening period. Diarrhea incidence for FSBM was significantly decreased compared to that in the SBM group in the six-week period after weaning. These results indicate that dietary FSBM can improve the growth rate and health condition during the calving period. Holstein cows fed fermented soybean meal had higher milk urea nitrogen levels and decreased somatic cell counts compared to those fed SBM. These results may be closely related with the increased average daily gain body weight associated with dietary FSBM.

• 대한한방소아과학회지
• /
• 제25권3호
• /
• pp.57-69
• /
• 2011

Objectives: Purpose of this study is to analyze and to estimate which and how much genetic and environmental factors have affected on growth. Also, a method of final height prediction can be developed from this study results. Methods: Correlation analysis and categorical regression analysis were conducted between genetic and environmental factors correlated with the final adult height, through survey from 171 male. Results: Mid parental height, neonatal body weight, intake frequency of beef, chicken, milk, fruits and coffee, sleep quantity and quality during the elementary school and sleep quantity during the middle school have affected on the final adult height. And a regression equation with 0.494 for coefficient of determination was obtained. Conclusions: Mid-parental-height has the most affected on the final adult height. Among environmental factors, food and sleep have significantly affected, but exercise doesn't. Among foods, meal, beef, and milk intake have remarkably affected on the final height, and chicken and fruit also have affected in some degree, but coffee has affected badly. Among sleep habits, sleep quantity during the elementary school has the most affected, sleep quality during the elementary school and sleep quantity during the middle school also have affected in some degree on final height. The younger the age is, the more sleep have affected and sleep quantity have more affected than sleep quality. Neonatal weight also has remarkably affected on the final height. Through this analysis, the final adult height can be predicted using regression equation which covers 49.4% of genetic and environmental factors.