After the virtual eradication of cattle during World War II, Papua New Guinea herds were rebuilt with Shorthorn and Aberdeen Angus cattle from Australia. These, and Red Sindhi and Sahiwal, imported in 1952, were considered unsuitable breeds. In 1954, Department of Agriculture, Stock and Fisheries imported three Brahman bulls and three heifers from Texas and in 1960 began importations of Afrikaner from Queensland. In Central Province, Brahmans were crossed with Angus and at Erap (Morobe) the hottest place in Papua New Guinea, Shorthorns were crossed with Afrikaners. In 1965, Brahman and Brahman-cross were sent to Erap. Records of breeding and growth rates were collected for use in upgrading in cattle of the basis of performance, not pedigree. The data are not ideal for genetic analysis, since no control groups were maintained. Birth weights (BWT), weaning weights (WWT) and calving intervals (CI) were analysed for the period 1969-1978. After exclusion of unsatisfactory data, 2,514 calf records were used, including both breeds from 1969 to 1973, but only Brahman-cross subsequently. Breed mean BWT ranged only from 30.6 to 33.8 kg. As Brahman content increased, BWT decreased and WWT increased; within a genotype, there was a negative maternal effect of high Brahman content on BWT and a positive effect on WWT which ranged from 138 to 174 kg. Afrikaner calves had heavier BWT but lighter WWT. As expected, bulls were heaviest, heifers lightest and mature cows bore and reared heavier calves. Calving interval (405 days, equivalent to 90% calving) was unaffected by breed but 4-year old cows averaged 423 days. Breed differences in BWT and WWT are consistent with the body of literature on performance of Brahmans and Afrikaners. Since cattle tick are not present and internal parasites are insignificant at Erap, the superiority of Brahmans indicates that they were better at utilizing the mediocre quality grazing of the Markham Valley or were more heat tolerant. Performance selection over ten years resulted in the virtual elimination of Afrikaners, with the final genotype approximately 9/16 Brahman, 3/8 Shorthorn and 1/16 Afrikaner.
Tashakori, Shervin;Farhangdoust, Saman;Baghalian, Amin;McDaniel, Dwayne;Tansel, Ibrahim N.;Mehrabi, Armin
Structural Engineering and Mechanics
/
제75권3호
/
pp.369-376
/
2020
The life of conventional steel plastic injection molds is long but manufacturing cost and time are prohibitive for using these molds for producing prototypes of products in limited numbers. Commonly used 3D printers and rapid prototyping methods are capable of directly converting the digital models of three-dimensional solid objects into solid physical parts. Depending on the 3D printer, the final product can be made from different material, such as polymer or metal. Rapid prototyping of parts with the polymeric material is typically cheaper, faster and convenient. However, the life of a polymer mold can be less than a hundred parts. Failure of a polymeric mold during the injection molding process can result in serious safety issues considering very large forces and temperatures are involved. In this study, the feasibility of the inspection of 3D printed molds with the surface response to excitation (SuRE) method was investigated. The SuRE method was originally developed for structural health monitoring and load monitoring in thin-walled plate-like structures. In this study, first, the SuRE method was used to evaluate if the variation of the strain could be monitored when loads were applied to the center of the 3D printed molds. After the successful results were obtained, the SuRE method was used to monitor the artifact (artificial damage) created at the 3D printed mold. The results showed that the SuRE method is a cost effective and robust approach for monitoring the condition of the 3D printed molds.
본 연구에서는 버형성중의 파단을 파단전의 소성변형의 과정이 파단에 영향을 미치는 연성파단(ductile fracture)으로 간주하여 McClintock의 연성파단에 관한 모델 을 이용하여 버형성중의 파단변형도를 얻었다. 이 파단변형도가 인장시험으로부터 얻 은 파단변형도와 커다란 오차가 없음을 확인하여 편의상 인장시험에서의 파단변형도를 버형성중의 파단발생 판정기준으로 사용하였다. 버형성이 시작된 이후에 공구인선부 에서의 피삭재의 변위의 발달에 관한 모델이 제시되었고 파단변형도와 최대변형량과의 비교로부터 파단위치와 각도가 결정된다.
Objectives: The purpose of this study is to compare the effects of bee venom pharmacopuncture (BVP) therapy according to the methods used to treat knee osteoarthritis (OA): intra-acupoint combined with intra-articular injection, intra-acupoint injection, and intra-articular injection. Methods: A total of 69 patients were recruited by the Department of Acupuncture & Moxibustion at Dong-Eui Oriental University Hospital from February 1 to July 23, 2012. The patients were assigned to 3 groups: the first group with intra-acupoint combined with intra-articular BVP Injection (the experimental group), the 2nd group with intra-acupoint BVP injection (control group II), and the 3rd group with intra-articular BVP injection (control group II). The participants were assigned in the order in which they were recruited. Treatments were done twice a week, for a total of 9 times. The effectiveness was assessed by using the visual analouge scale (VAS) and the Korea Western Ontario and McMaster Universities Osteoarthritis Index (KWOMAC). Results: All three groups exhibited significant VAS and KWOMAC effects. Moreover, the 4 week follow-up after the final treatment showed a persistence of BVP effects. However, when the groups were compared, no statistically significant differences in VAS and KWOMAC were noted, but when improvement was considered, the results showed that intra-articular injection was more effective than intra-acupoint injection. Especially, intra-acupoint combined with intra-articular injection was the most effective among the three treatments. Conclusions: Combining intra-acupoint with intra-articular injection, depending on the patient's symptoms, may produce better results when conservatively treating knee OA.
단층촬영 영상으로부터 임의의 등밀도 표면을 재구성하기 위한 새로운 방법을 제안하였다. 제안된 방법은 이 분야의 가장 대표적인 알고리즘인 마칭큐브에서와는 달리 단층영상에서 직접 등밀도 표면을 생성하지 않고 등밀도점을 먼저 추출하며, 셀경계 알고리즘을 이용하여 구한 초기메쉬의 각 정점들을 이들 등밀도점 방향으로 표면축소포장(Shrink-wrapping)하는 과정을 반복적으로 적용하여 등밀도 표면을 추출한다. 이렇게 함으로써 마칭큐브에서 나타나는 크랙이나 표면결정의 모호성이 발생하지 않고 안정적인 표면을 재구성 할 수 있다. 또한, 마칭큐브에서 O(1)-인접한 등밀도점만을 사용할 수 있는데 비해, 제안된 방법은 O(2) 및 O(3)-인접한 등밀도점을 표면재구성에 활용할 수 있게 함으로써 이론적으로 마칭큐브 알고리즘보다 더 정밀한 표면을 추출할 수 있도록 하였다. 실험을 통해 제안된 표면 재구성 알고리즘이 단층영상에서부터 등밀도면을 재구성하는데 매우 안정적이고 정확하며 효과적임을 확인할 수 있었다.
알칼리와 고온에 대한 내성을 가진 invertase를 대량생산하기 위하여 호알칼리성이며 고온성 세균인 Bacillus sp. TA-11의 세포내 invertase유전자를 pUC 19벡터를 이용하여 E. coli HB101에 클로닝 시키고 발현시켜 invertase를 강력하게 생산하는 재조합 E. coli (pYC17)를 얻었다. 재조합 E. coli(pYC17)를 이용한 invertase 생산 최적조건을 검토한 결과 E. coil(pYC17)를 0.25% sucrose, 0.5% yeast extract, 0.1% $K_2HPO_4$와 0.1% $KH_2PO_4$을 함유한 SY배지(초기 pH 9.0)에 접종하여 37$^{\circ}C$에서 9시간 배양하였을 때 친주보다도 많은 47.7 U/ml-cell free extract의 invertase가 생산되었다.
Chun, Moo-Young;Moon, Dae-Sik;Jeong, Ueejeong;Yu, Young Sam
천문학회보
/
제39권2호
/
pp.95-95
/
2014
The mass measurement of neutron stars or black holes is of fundamental importance in our understanding of the evolution of massive stars and core-collapse supernova explosions as well as some exotic physics of the extreme conditions. Despite the importance, however, it's very difficult to measure mass of these objects directly. One way to do this, if they are in binary systems, to measure their binary motions (i.e., Doppler shifts) which can give us direct information on their mass. Recently many new highly-obscured massive X-ray binaries have been discovered by new hard X-ray satellites such as INTEGRAL and NuSTAR. The new highly-obscured massive X-ray binaries are faint in the optical, but bright in the infrared with many emission lines. Based on the near-infrared spectroscopy, one can first understand the nature of stellar companions to the compact objects, determining its spectral types and luminosity classes as well as mass losses and conditions of (potential) circumstellar material. Next, spectroscopic monitoring of these objects can be used to estimate the mass of compact objects via measuring the Doppler shifts of the lines. For the former, broad-band spectroscopy is essential; for the latter, high-resolution spectroscopy is critical. Therefore, IGRINS appears to be an ideal instrument to study them. An IGRINS survey of these new highly-obscured massive X-ray binaries can give us a rare opportunity to carry out population analyses for understanding the evolution of massive binary systems and formation of compact objects and their mass ranges. In this talk, we will present a sample near-infrared high resolution spectra of HMXB, IGR J19140+0951 and discuss about its spectral feature. These spectra are obtained on 13th July, 2014 from IGRINS commissioning run at McDonald 2.7m telescope. And at final, we will introduce the upgrade plan of IGRINS Operation Software (IGOS), to gather the input from IGRINS observer.
Campos, Rafael Viegas;Cobuci, Jaime Araujo;Kern, Elisandra Lurdes;Costa, Claudio Napolis;McManus, Concepta Margaret
Asian-Australasian Journal of Animal Sciences
/
제28권4호
/
pp.476-484
/
2015
The objective of this study was to estimate genetic and phenotypic parameters for linear type traits, as well as milk yield (MY), fat yield (FY) and protein yield (PY) in 18,831 Holstein cows reared in 495 herds in Brazil. Restricted maximum likelihood with a bivariate model was used for estimation genetic parameters, including fixed effects of herd-year of classification, period of classification, classifier and stage of lactation for linear type traits and herd-year of calving, season of calving and lactation order effects for production traits. The age of cow at calving was fitted as a covariate (with linear and quadratic terms), common to both models. Heritability estimates varied from 0.09 to 0.38 for linear type traits and from 0.17 to 0.24 for production traits, indicating sufficient genetic variability to achieve genetic gain through selection. In general, estimates of genetic correlations between type and production traits were low, except for udder texture and angularity that showed positive genetic correlations (>0.29) with MY, FY, and PY. Udder depth had the highest negative genetic correlation (-0.30) with production traits. Selection for final score, commonly used by farmers as a practical selection tool to improve type traits, does not lead to significant improvements in production traits, thus the use of selection indices that consider both sets of traits (production and type) seems to be the most adequate to carry out genetic selection of animals in the Brazilian herd.
Recently, the development of ICT(information & communications technology) with the advent of new media paradigm shift in learning has brought a dramatic impact on the competitiveness of universities. The previous studies on the academic performance of e-learning mainly targeted on e-learning users, studying additional synchronization and system quality factors to measure academic performance. This study empirically analyzed the learning flow and academic performance considering both DeLone & McLean model system quality and synchronizing factors based on ARCS model. Relating to quality and synchronization factors, the academic performance of e-learning system was tested, and the difference between learning flow and academic performance was also analyzed based on time-series data, by the test difference(in the beginning, during, and final of the semester). The results of the study are as follows. First, the study shows that both system quality and synchronization directly affected the learning performance. Thus, when designing e-learning system, it is necessary to consider these two factors at the same time. Second, the indirectly mediating effect on the system quality and synchronization factors turned out to be significant in learning flow. Third, the result of regression analysis on the contents of utilizing dummy variable presents that the teacher's explanation has greater influence than multimedia has to the academic performance, and furthermore, the test difference showed no significance. Further research should be undertaken to consider the learner's degree of acceptance which reflects various aspects for building m-learning or u-learning.
We describe a survey of quasars in the early universe, beyond z ~ 5, which is one of the main science goals of the Infrared Medium-deep Survey (IMS) conducted by the Center for the Exploration of the Origin of the Universe (CEOU). We use multi-wavelength archival data from SDSS, CFHTLS, UKIDSS, WISE, and SWIRE, which provide deep images over wide areas suitable for searching for high redshift quasars. In addition, we carried out a J-band imaging survey at the United Kingdom InfraRed Telescope with a depth of ~23 AB mag and survey area of ${\sim}120deg^2$, which makes IMS a suitable survey for finding faint, high redshift quasars at z ~ 7. In addition, for the quasar candidates at z ~ 5.5, we are conducting observations with the Camera for QUasars in EArly uNiverse (CQUEAN) on the 2.1m telescope at McDonald Observatory, which has a custom-designed filter set installed to enhance the efficiency of selecting robust quasar candidate samples in this redshift range. We used various color-color diagrams suitable for the specific redshift ranges, which can reduce contaminating sources such as M/L/T dwarfs, low redshift galaxies, and instrumental defects. The high redshift quasars we are confirming can provide us with clues to the growth of supermassive black holes since z ~ 7. By expanding the quasar sample at 5 < z < 7, the final stage of the hydrogen reionization in the intergalactic medium (IGM) can also be fully understood. Moreover, we can make useful constraints on the quasar luminosity function to study the contribution of quasars to the IGM reionization.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.