• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3133-3150
• /
• 2021

This work deals with the validation of a high-fidelity multiphysics system coupling the Serpent 2 Monte Carlo neutron transport code with SUBCHANFLOW, a subchannel thermalhydraulics code, and TRANSURANUS, a fuel-performance analysis code. The results for a full-core pin-by-pin burnup calculation for the ninth operating cycle of the Temelín II VVER-1000 plant, which starts from a fresh core, are presented and assessed using experimental data. A good agreement is found comparing the critical boron concentration and a set of pin-level neutron flux profiles against measurements. In addition, the calculated axial and radial power distributions match closely the values reported by the core monitoring system. To demonstrate the modeling capabilities of the three-code coupling, pin-level neutronic, thermalhydraulic and thermomechanic results are shown as well. These studies are encompassed in the final phase of the EU Horizon 2020 McSAFE project, during which the Serpent-SUBCHANFLOW-TRANSURANUS system was developed.

• Asia-Pacific Journal of Business
• /
• v.9 no.3
• /
• pp.71-82
• /
• 2018

This study verifies whether the sustainable tax strategy provides unique information on earnings persistence and brings about the difference of value relevance of accounting information. Sustainability is measured by the 5-year coefficient of variation in cash ETR, such as in McGuire et al.(2013), which measures variability in long-term performance of tax avoidance. The value relevance of accounting information in this study is modified by the Ohlson model(1995), which explains the value of the firm by using accounting information such as net assets and net income and other non-accounting information. The samples of this study are the firms listed on the securities market from 2004 to 2015 and the final samples are 3,133 firm-year. The results of this empirical analysis show that the value relevance of accounting information increases as firms have long-term and sustainable tax strategies. Most of the prior studies on tax strategies have examined the tax minimization strategy that minimizes the tax cost. However, this study is different in that the sustainability of the tax strategy affects the value relevance of accounting information. The results of this study will be useful for the users to make decision using the value relevance of accounting information.

• Structural Engineering and Mechanics
• /
• v.72 no.4
• /
• pp.479-489
• /
• 2019

The corrosion of reinforcement leads to a gradual decay of structural strength and durability. Several models for crack occurrence prediction and crack width propagation are investigated in this paper. Analytical and experimental models were used to predict the bond strength in the period of corrosion propagation. The manner of flexural strength loss is calculated by application of these models for different scenarios. As a new approach, the variation of the concrete beam neutral axis height has been evaluated, which shows a reduction in the neutral axis height for the scenarios without loss of bond. Alternatively, an increase of the neutral axis height was observed for the scenarios including bond and concrete section loss. The statistical properties of the parameters influencing the strength have been deliberated associated with obtaining the time-dependent bending strength during corrosion propagation, using Monte Carlo (MC) random sampling method. Results showed that the ultimate strain in concrete decreases significantly as a consequence of the bond strength reduction during the corrosion process, when the section reaches to its final limit. Therefore, such sections are likely to show brittle behavior.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.5-7
• /
• 1974

1. This study indicates that above the fiber saturation point the drying rate can be increased with increasing the velocity of the air circutation, i.e., the drying rate of sample boards is proportional to the air velocity, but below the fiber saturation point, the effect of the velocity of air circulation is very low as shown in Figs. 1 and 2. 2. Under the controlled temperature and humidity in the kiln, the more the sample boards have moisture, the higher drying rate of it can be obtained. In other words, this means that even though in the case of drying various moisture content of wood, at the final drying stage, approximately the same percentage of moisture content of wood can be secured by employing the higher velocity of air circulation. 3. This study shows that the rate of drying in kiln changes distinctly at the fiber saturation point, i, e., above the fiber saturation point, the drying curve shows concave aginst the X axsis, but below the fiber saturation point, in the range from 30 percent of moisture content to 20 percent of moisture content, the curve shows convex as shown in Fig. 3. As the drying progresses, however, the drying curve shows concave again below 20 percent of moisture content. This means that inflection point of drying curve may be located clearly at the fiber saturation point, i.e., 30 percent of moisture content. As mentioned above, the 30 percent of moisture content of wood at which the inflectional point appears can be recognized as a critical point, i. e., the fiber saturation point at which all free water was removed from wood. The existence of inflectional point indicates that the evaporation of hygroscopic water in a cell wall is more difficult than the evaporation of free water in a cell cavity and the minor space of cell wall. The convex curve in the range of moisture content from 30 percent to 20 percent means that the evaporation of capillary condensed water has a tendency of the same rates of drying approximately, but as approaching to the 20 percent of moisture, the transfusion of moisture from wood becomes difficult because of having less moisture in cell wall. Below 20 percent of moisture content, the drying curve shows concave again, which means that it is difficult to remove the moisture located nearer to the surface of cellulose molecules and the surface bound water. These relations were revealed in Fig. 4. In comparison AC curve which does not have the two inflection points with BD curve which has two inflection points, i.e., Band D, they are mentioned already, by existence of the inflection points, the curve BD shows that the change of drying rate in the interval from 20 percent of moisture content to 30 percent of moisture content is not greater than in the case of the curve AC in the same interval. At the inflection point of 30 percent of moisture content, it can be noticed that the changing of the drying rate is very conspicuous. This phenomenon also can be recognized, as it is noticed by the Fig. 3, the drying rate from green to 30 percent of moisture content is very great. But the inclination of the curve is very slow from 30 percent of moisture content to 20 percent of moisture content, i.e., the inclination of the curve becomes almost horizontal lines. Acknowledgments Gratitude is expressed to Fred E. Dickinson, Professor of 'Wood Technology, School of Natural Resources, University of Michigan, USA for his suggestion to carry out this study.

• Journal of the Korean Orthopaedic Association
• /
• v.52 no.1
• /
• pp.15-24
• /
• 2017

Purpose: The aim of this study was to determine the effectiveness of arthroscopic debridement with mini-open ulnar nerve decompression in primary osteoarthritis of the elbow with ulnar neuropathy. Materials and Methods: Between May of 2006 and July of 2014, a total of 43 patients who had undergone surgery for primary osteoarthritis of the elbow with ulnar neuropathy were included in this study. We divided the subjects into two groups according to the method of surgery: group 1 (n=18) received mini-open ulnar nerve decompression only, and group 2 (n=25) received arthroscopic debridement with mini-open ulnar nerve decompression. Patients were assessed for the following clinical outcomes: visual analogue scales (VAS) score, range of motion of the elbow joint, Mayo elbow performance score (MEPS), and disabilities of the arm, shoulder and hand (DASH) at the time before surgery and 6 months after surgery. We analyzed the recovery of the ulnar nerve by the McGowan grade and Bishop rating score preoperatively and at 6 months after the surgery. Results: The VAS score, range of motion of the elbow joint, MEPS, and DASH showed significant statistical difference after the surgery (p<0.05). However, between the 2 groups, there was no significant difference. For the McGowan grade, all cases of both groups-except one case each group-showed at least one grade improvement. Moreover, group 2 showed a greater significant difference than group 1 (p=0.001). At the final follow-up, according to the Bishop rating score, group 2 had a greater significant difference than group 1 (p=0.036). Conclusion: Arthroscopic debridement with mini-open ulnar nerve decompression in primary osteoarthritis of the elbow with ulnar neuropathy is a useful technique, which has several advantages, including the benefits associated with a minimally invasive surgery and also the improvement of elbow joint function and excellent recovery of the ulnar nerve.

• Journal of Life Science
• /
• v.12 no.6
• /
• pp.721-730
• /
• 2002

This study was carried out to select new pelleting binder and material for Welsh onion seeds. The optimum treatments of the various plant growth regulators to improve seed germination of the Welsh onion was also estimated. There were no significant effects of growth regulators on the germination percentage, but germination was faster according to the number of days to 50% of the final germination ($T_{50}$) and the mean number of days to germination (MDG) than those of the control. Germinability was increased when the seeds were soaked in gibberellic acid ($GA_3$) solution for 24hrs, even though there was no synergy effect on the germinability when $GA_3$ was mixed with 6-benzylaminopurine (BAP). The optimum treatment for improving germination of Welsh onion was observed when the tested seeds was soaked in 500 $\mu$M of $GA_3$ at $20^{\circ}C$ for 24hrs. Also, when the seeds soaked in the aforementioned treatment, the rate of germination was increased at lower temperature than at $20^{\circ}C$, the optimal temperature. The percentage and the speed of seed germination depended on the kinds of pelleting binder and their concentration. It showed that the higher the concentration of the binder for seeds pelleting, the lower the percentage of seed germination. Among the pelleting binder, polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) were the best binders for seed pelleting, because seed germination using those binder did not affect on the concentration of binder. On the other hand, Carboxymethy cellulose (CMC) and methyl cellulose (MC) severely inhibited the seed germination The germinability was also different arcording to the pelleting materials. Among the different 58 pelleting materials, kaoline alone, the mixture of bentonite and kaoline, the mixture of bentonite, calcium carbonate and diatomaceous earth #300 were found as the best pelleting materials for welsh onion seeds.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.57-66
• /
• 2017

SIR model (Kermack and McKendrik, 1927) is one of the most popular method to explain the spread of disease, In order to construct SIR model, we need to estimate transition rate parameter and recovery rate parameter. If we don't have any information of the two rate parameters, we should estimate using observed whole trajectory of pandemic of disease. Thus, with restricted observed data, we can't estimate rate parameters. In this research, we introduced Reed-Frost model (Andersson and Britton, 2000) to calculate the probability of infection in the early stage of pandemic with the restriction of data. When we have an initial number of susceptible and infected, and a final number of infected, we can apply Reed - Frost model and we can get the probability of infection. We applied the Reed - Frost model to the Vibrio cholerae pandemic data from Republic of the Cameroon and calculated the probability of infection at the early stage. We also construct SIR model using the result of Reed - Frost model.

• Archives of Pharmacal Research
• /
• v.22 no.5
• /
• pp.437-447
• /
• 1999

Type I diabetes, also known as insulin-dependent diabetes mellitus (IDDM) results from the destruction of insulin-producing pancreatic $\beta$ cells by a progressive $\beta$ cell-specific autoimmune process. The pathogenesis of autoimmune IDDM has been extensively studied for the past two decades using animal models such as the non-obese diabetic (NOD) mouse and the Bio-Breeding (BB) rat. However, the initial events that trigger the immune responses leading to the selective destruction of the $\beta$ cells are poorly understood. It is thought that $\beta$ cell auto-antigens are involved in the triggering of $\beta$ cell-specific autoimmunity. Among a dozen putative $\beta$ cell autoantigens, glutamic acid decarboxylase (GAD) has bee proposed as perhaps the strongest candidate in both humans and the NOD mouse. In the NOD mouse, GAD, as compared with other $\beta$ cell autoantigens, provokes the earliest T cell proliferative response. The suppression of GAD expression in the $\beta$ cells results in the prevention of autoimmune diabetes in NOD mice. In addition, the major populations of cells infiltrating the iselts during the early stage of insulitis in BB rats and NOD mice are macrophages and dendritic cells. The inactivation of macrophages in NOD mice results in the prevention of T cell mediated autoimmune diabetes. Macrophages are primary contributors to the creation of the immune environment conducive to the development and activation of $\beta$cell-specific Th1-type CD4+ T cells and CD8+ cytotoxic T cells that cause autoimmune diabetes in NOD mice. CD4+ and CD8+ T cells are both believed to be important for the destruction of $\beta$ cells. These cells, as final effectors, can kill the insulin-producing $\beta$ cells by the induction of apoptosis. In addition, CD8+ cytotoxic T cells release granzyme and cytolysin (perforin), which are also toxic to $\beta$ cells. In this way, macrophages, CD4+ T cells and CD8+ T cells act synergistically to kill the $\beta$ cells in conjunction with $\beta$ cell autoantigens and MHC class I and II antigens, resulting in the onset of autoimmune type I diabetes.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2004

Seedling mechanization of lettuce is known to be difficult due to the small seed size and the irregular seed shape. The purpose of seed pelleting is to make seedling mechanization possible by enlarging the seed size. After that, it can reduce seedling and thinning labours and can also save seeds. According to the results, there were significant differences on the percent germination and day to 50% final germination in accordance with the pelleting polymer. Among the pelleting polymer, gemination of seeds using polynimyl alcohol (PVA) was generally smooth, and followed by polyvinyl pyrrolidone (PVP), hydroxyethyl cellulose (HEC), methyl cellulose (MC), and wteen 80. The germination rate was also different according to the pelleting particulate matters. Generally, percent germination and speed of seed using the mixture of diatomaceous earth, talc and calcium carbonate were higher and faster than using other polleting materials, respectively. Thus, it should be suitable pelleting particulate matter for the pelleting of lettuce seeds. On the other hands germination of seeds using limestone, calcium oxide and benonite were low. The seed size of lettuce after pelleting was 33 times as large as the raw seed size. During the process of seed pelleting, netrient addition induced the decrement on the germination and the delay of germination speed. Also, there was differences in the germinability of pelleted seeds in accordance with the addition of nutrient sources. MS medium was generally lower than monosodium phosphate in inhibition of seed germination. Germination of pelleted seeds after priming was higher than the seeds without the treatment, and also showed the trend of early germination.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.4
• /
• pp.10-39
• /
• 1988

This study investigated the temperatures and relative humidities in the semi-greenhouse type solar dryer with a black rock-bed heat storage and without heat storage and outdoor temperature and relative humidity at 9 a.m. and 2 p.m.. A comparison was made of the drying rates, final moisture contents, moisture content distributions, casehardening stresses, drying defects, volumetric shrinkage of dried lumber for solar- and air-drying from the green condition of mixtures of Douglas-fir, lauan, taun, oak and sycamore 25mm- and 50 mm-thick lumber during the same period for four seasons, and heat efficiencies for solar dryer with and without the heat storage for saving of heat energy and the cost of lumber drying using the solar energy. The results from this study were summarized as follows: I. The mean weekly temperatures in the solar dryers were 3 to $6^{\circ}C$ at 9 a.m. and 9 to $13^{\circ}C$ at 2 p.m. higher than mean outdoor temperature during all the drying period. 2. The mean weekly relative humidities in the solar dryers were about 1 to 19% at 9 a.m. higher than the outdoor relative humidity. and the difference between indoor and outdoor relative humidity in the morning was greater than in the afternoon. 3. The temperatures and relative humidities in the solar dryer with and without the heat storage were nearly same. 4. The overall solar insolation during the spring months was highest and then was greater in the order of summer, atumm, and winter month. S. The initial rate of solar drying was more rapid than that of air drying. As moisture content decreased, solar drying rate became more rapid than that of air drying. The rates of solar drying with and without heat storage were nearly same. The drying rate of Douglas-fir was fastest and then faster in the order of sycamore, lauan, taun and oak. and the faster drying rate of species, the smaller differences of drying rates between thicknesses of lumber. The drying rates were fastest in the summer and slowest in the winter. The rates of solar drying during the spring were more slowly in the early stage and faster in the later stage than those during the autumn. 6. The final moisture contents were above 15% for 25mm-thick air dried and about 10% for solar dried lumber, but the mean final MCs for 50mm-thick lumber were much higher than those of thin lumber. The differences of final MC between upper and lower course of pile for solar drying were greater than those of pile for air drying. The differences of moisture content between the shell and the core of air dried lumbers were greater than those of solar dried lumber, smallest in the drying during summer and greatest in the drying during winter among seasons. 7. Casehardening stresses of 25mm- and 50mm-thick dried lumber were slight, casehardening stress of solar dried lumber was severer than that of air dried lumber and was similar between solar dried lumber with and without heat storage, Casehardening stresses of lumber dried during spring were slightest and then slighter in the order of summer, autumn, and winter. Casehardening stresses of Douglas -fir, sycamore and lauan were slight, comparing with those of taun and oak. 8. Maximum initial checks of 25mm-thick lumber occurred above and below fiber saturation point and those of 50mm-thick lumber occurred in the higher moisture content than thin lumber. As the moisture content decreased, most of checks were closed and didn't show distinct difference of the degree of checks among drying methods. The degree of checks were very slight in case of Douglas-fir and lauan, and severe in case of taun and oak. The degree of checks for 50mm-thick lumber were severer than those for 25mm-thick lumber. 9. The degree of warpage showed severe in case of oak and sycamore lumber, but no warping was found in case of Douglas-fir, lauan and taun. 10. The volumetric shrinkages of taun and oak were large and medium in case of Douglas-fir, lauan and sycamore. 11. Heat efficiencies of solar dryer with heat storage were 6.9% during spring, 7.7% during summer, 12.1% during autumn and 4.1% during winter season. Heat efficiency of solar dryer with heat storage was slightly greater than that of without heat storage. As moisture content of lumber decreased, heat efficiency decreased.