• 제목/요약/키워드: filtration performance

검색결과 375건 처리시간 0.024초

Purification and Characterization of Novel Antimicrobial Peptide from the Skin of the Hagfish , Eptatretus burgeri

  • Hwang, Eun-Young;Seo, Jung-Kil;Kim, Chan-Hee;Go, Hye-Jin;Kim, Eun-jung;Chung, Joon-Ki;Rye, Hong-Soo;Park, Nam-Gyu
    • Preventive Nutrition and Food Science
    • /
    • 제4권1호
    • /
    • pp.28-32
    • /
    • 1999
  • A novel antimicrbial peptide , named HFS-I, was isolated and characterized from the skin of the hagfish, Eptatretus bugeri. The decapeptide with a molecular mass of 1279.5 Da was purified to homogeneity using a gel-filtration column, ion-exchange and C18 reverse-phase high performance liquid chromatograpy . The complete amino acid sequence of HFS-I, which was determined by a combination of an automated amino acid sequencing and FAB-MS, was F-P-W-W-L-S-G-K-Y-P-NH2. Comparison of the amino acid sequence with those of other known antimicrobial peptides revealed that HFS-I was a novel antimicrobial peptide. HFS-I showed a weak antimicrobial activity in vitro aganinst a broad spectrum of microorganism without hemolytic acitivity.

  • PDF

대기 유기질소화합물의 분석방법 및 농도 (Review on the Analytical Methods and Ambient Concentrations of Organic Nitrogenous Compounds in the Atmosphere)

  • 최나래;김용표
    • 한국대기환경학회지
    • /
    • 제34권1호
    • /
    • pp.120-143
    • /
    • 2018
  • The analytical methods and their ambient levels of organic nitrogenous compounds such as nitrosamines, nitramines (nitroamines), imines, amides and nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) in the atmosphere are summarized and discussed. Sampling for the analysis of organic nitrogenous compounds was mostly conducted using high volume air sampler. The direct liquid extraction (DLE) using sonification and the pressurized liquid extraction (PLE) using the accelerated solvent extraction (ASE) have been frequently employed for the extraction of organic nitrogenous compounds in the atmospheric samples. After extraction, clean-up via filtration and the solid phase extraction (SPE) and concentrations using nitrogen and rotary evaporator have been generally conducted but in some studies the clean-up and concentration steps have been omitted to prevent the loss of analyte and improve the recovery rate of the analytical procedure. Instrumental analysis was mainly carried out using gas chromatography (GC) or the high performance liquid chromatography (HPLC) coupled with the single quadrupole mass spectrometer or tandem mass spectrometer in the electron ionization (EI), positive chemical ionization (PCI) and negative chemical ionization (NCI) mode and analysis sensitivity of nitrosamines and nitramines were higher in NCI mode. Desirable sampling and analysis methods for analyzing particulate organic nitrogenous compounds are suggested.

절삭가공(切削加工)에 사용(使用)되는 절삭유(切削油)의 농도최적화(濃度最適化)에 관(關)한 연구(硏究) (A Study on Optimization of The Concentration of Cutting Oil to be used for Cutting)

  • 김규태;김원일
    • 한국산업융합학회 논문집
    • /
    • 제16권3호
    • /
    • pp.95-102
    • /
    • 2013
  • It is indispensable to modern society metal processing since the industrialized rapidly, but it is a metalworking cutting fluid immediately. In addition, this means selecting a emulsion on the basis of quality criteria processing method, the material of the material, cutting depth, cutting speed, Djourou fence Liang, and surface roughness, cutting oil, the shape of the device based on the emulsion, I will be the structure of the tank, filtration equipment also changes. In particular, acting bacteria is now breeding in response to the passage of time due to metal ion degradation due to heat generated hydraulic fluid leakage, humidity tung, during processing, seep from processing material at the time of processing the water-soluble cutting oil for generating the malodor by dropping significantly the performance of the cutting oil to corruption from, sometimes by introducing various additives to suppress spoilage in advance. In this study, we expect the effect of the cost reduction in the extension of fluid replacement cycle through the application of the management apparatus and deep understanding in the management of cutting fluid, the working environment through the understanding and interest of workers in the production site more than anything I try to become useful for the improvement.

분리막을 이용한 쌀뜨물내 유효성분의 회수 (Recovery of Useful Components from Rice-washing Water Using Membranes)

  • 정건용;박성희
    • 멤브레인
    • /
    • 제12권3호
    • /
    • pp.165-170
    • /
    • 2002
  • 씻어나온 쌀(무세미) 생산공정 중 발생하는 쌀뜨물 중 함유된 유효성분, 특히 단백질 회수를 위한 분리막 공정에 관하여 검토하였다. 먼저 dead-end형 Amicon 여과셀을 이용하여 단백질 농축에 적절한 분리막을 선정하였으며 이를 토대로 중공사형 한외여과 모듈 또는 가정용 정수기에 사용되는 나권형 나노여과 및 역삼투 모듈을 이용한 투과실험을 행하였다. 그 결과, 분획분자량이 10,000 dalton인 한외여과막은 쌀뜨물내 유효성분 내지는 단백q질을 농축하기에 적절하지 않았다. 그러나 역삼투 또는 나노여과 모듈에 9% 가량의 단백질이 함유된 원료용액을 250%까지 농축할 경우, 역삼투 모듈 농축액중에 단백질의 농도는 22%로서 약 2.4배가 농축되었으며 나노여과 모듈의 경우는 약 2배까지 단백질을 농축할 수 있었다.

석유화학계 기초화합물 제조시설과 합성수지 및 기타 플라스틱물질 제조시설의 폐수처리시설 BAT평가 (Assessment of Best Available Technology of Wastewater Treatment Facilities in Petrochemical Basic Compound Manufacturing and Plastics and Synthetic Resins Manufacturing)

  • 김영노;임병진;권오상
    • 한국물환경학회지
    • /
    • 제22권1호
    • /
    • pp.59-65
    • /
    • 2006
  • The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for petrochemical basic compound manufacturing (PBCM) and plastics and synthetic resins manufacturing (PSRM) industry. Wastewater discharged from the each category contains high concentration of COD and toluene. Eighteen sites were surveyed and wastewater qualities were analyzed. Six and two different technologies were applied to the PBCM and PSRM industry for the end-of-pipe treatment process, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options: typical activated-sludge process + sand filtration + activated carbon adsorption (PBCM) and wet oxidation + chemical precipitation + typical activated-sludge process + chemical precipitation (PSRM) were selected as the BAT for each industry.

세라믹 섬유를 이용한 멤브레인 필터의 연구개발 동향 (Development Trend of Membrane Filter Using Ceramic Fibers)

  • 김득주;이정우;남상용
    • 멤브레인
    • /
    • 제26권2호
    • /
    • pp.87-96
    • /
    • 2016
  • 세라믹 소재는 고분자 나노섬유 분리막과 비교하여 우수한 열안정성과 고투과 물성을 가짐으로써 지난 10여 년간 많은 주목을 이끌어왔다. 최근 들어 높은 다공도와 유량을 가지는 세라믹 섬유 분리막이 금속 산화물을 이용하여 주로 전기방사법에 의해 제조되어 왔는데, 이러한 세라믹 분리막의 제조 단가를 감소하며 성능을 향상시키기 위해 나노섬유의 선택층을 가지는 세라믹 분리막들이 전기방사 공정과 개질 과정을 통해 개발되었다. 본 리뷰에서는 최근 수년간 세라믹 섬유 분리막의 개발을 위한 연구 동향에 대하여 정리하였다.

Separation and flux characteristics in cross-flow ultrafiltration of bovine serum albumin and bovine hemoglobin solutions

  • Hsiao, Ruey-Chang;Hung, Chia-Lin;Lin, Su-Hsia;Juang, Ruey-Shin
    • Membrane and Water Treatment
    • /
    • 제2권2호
    • /
    • pp.91-103
    • /
    • 2011
  • The flux behavior in the separation of equimolar bovine serum albumin (BSA) and bovine hemoglobin (HB) in aqueous solutions by cross-flow ultrafiltration (UF) was investigated, in which polyacylonitrile membrane with a molecular weight cut-off (MWCO) of 100 kDa was used. BSA and HB have comparable molar mass (67,000 vs. 68,000) but different isoelectric points (4.7 vs. 7.1). The effects of process variables including solution pH (6.5, 7.1, and 7.5), total protein concentration (1.48 and 7.40 ${\mu}M$), transmembrane pressure (69, 207, and 345 kPa), and solution ionic strength (with or without 0.01 M NaCl) on the separation were examined. It was shown that the ionic strength had a negligible effect on separation performance under the conditions studied. Although BSA and HB are not rigid bodies, the flux decline in the present cross-flow UF did not result from the mechanism of cake filtration with compression. In this regard, the specific cake resistance when pseudo steady-state was reached was evaluated and discussed.

Chemical cleaning of fouled polyethersulphone membranes during ultrafiltration of palm oil mill effluent

  • Said, Muhammad;Mohammad, Abdul Wahab;Nor, Mohd Tusirin Mohd;Abdullah, Siti Rozaimah Sheikh;Hasan, Hassimi Abu
    • Membrane and Water Treatment
    • /
    • 제5권3호
    • /
    • pp.207-219
    • /
    • 2014
  • Fouling is one of the critical factors associated with the application of membrane technology in treating palm oil mill effluent (POME), due to the presence of high concentration of solid organic matter, oil, and grease. In order to overcome this, chemical cleaning is needed to enhance the effectiveness of membranes for filtration. The potential use of sodium hydroxide (NaOH), sodium chloride (NaCl), hydrochloric acid (HCl), ethylenediaminetetraacetic acid (EDTA), and ultrapure water (UPW) as cleaning agents have been investigated in this study. It was found that sodium hydroxide is the most powerful cleaning agent, the optimum conditions that apply are as follows: 3% for the concentration of NaOH, $45^{\circ}C$ for temperature solution, 5 bar operating pressure, and solution pH 11.64. Overall, flux recovery reached 99.5%. SEM images demonstrated that the membrane surface after cleaning demonstrated similar performance to fresh membranes. This is indicative of the fact that NaOH solution is capable of removing almost all of the foulants from PES membranes.

팔라듐/탄소나노튜브 버키페이퍼를 이용한 상온감지 수소가스 센서 (Room Temperature Hydrogen Gas Sensor using Pd/Carbon Nanotubes Buckypaper)

  • 한마음;김재건;김영삼;정동건;공성호;정대웅
    • 센서학회지
    • /
    • 제29권6호
    • /
    • pp.394-398
    • /
    • 2020
  • In this paper, we report the sensing performance of H2 gas sensors composed of Pd/carbon nanotube (CNT) buckypaper at room temperature. The CNT buckypaper was made using a simple filtration process and subsequently deposited with Pd as the sensing material. The sensitivity of the sensor increased with respect to the gas concentration. To investigate the effect of Pd thickness, Pd layers of different thickness were deposited on the buckypaper, and the response of the sensor was evaluated. The proposed sensor exhibits excellent sensing properties with optimized Pd thickness at room temperature (25℃). Pd nanoparticles significantly impact the sensitivity and selectivity of the sensor because of the spillover effect. In addition, the sensor is highly suitable for bendable and wearable devices owing to its structural flexibility.

정삼투 멤브레인 공정에서 칼슘이온과 용존 유기물 상호작용에 의한 플럭스 변화 연구 (Systematic study on calcium-dissolved organic matter interaction in a forward osmosis membrane-filtration system)

  • 허지용;한종훈;김예진;허남국
    • 상하수도학회지
    • /
    • 제30권6호
    • /
    • pp.737-744
    • /
    • 2016
  • The investigation of effects on fouling propensity with various viscosity of feed solutions would be better understanding for forward osmosis (FO) performance since the fouling propensity was directly influenced with solution viscosity. Therefore, this study was focused on the FO fouling with model foultants (humic acid, alginate) by altering solution viscosity with change of ionic strength (I.S) and $Ca^{2+}$ concentrations. In the comparison between humic acid and alginate, as expected, the alginate generally caused more severe fouling (almost 35.8 % of flux reduction) based on the solution characteristics (high viscosity) and fouling patterns (coil and gel layer). However, interesting point to note is that the fouling propensity of alginate was more severe even though it was applied with low viscosity of feed conditions (I.S = 20 mM, $Ca^{2+}=1mM$). This might be due to that crossed linked gel layer of alginate on the FO membrane surface could be best formed in the condition of $Ca^{2+}$ presence and higher I.S, and that is more dominant to fouling propensity than the low viscosity of feed solutions.