• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.209-212
• /
• 2000

As a bench-scale study, transformation of nitrate to nitrogen gas under anoxic condition was determined by using autotrophic denitrifiers containing Thiobacillus denitrificans and elemental sulfur as an electron donor. The research objective is to measure the basic kinetic parameters of autotrophic denitrification reaction on the removal efficiency of nitrate. The results showed that nitrate was almost completely transformed to nitrite in the first 4 days of column operation. After 2 days of accumulation of nitrite, its concentration slowly decreased and the compound was detected less than 0.5 mg/L in 14 days. In the experiment, sulfate concentration in the effluent was the 70~90 mg-S/L and the pH was maintained around pH 7.5. When nitrate concentration of bank filtrate in the real field is considered, this sulfate concentration seems to be acceptable. At 17 cm from the bottom of the column, the effluent showed the highest nitrite concentration, and nitrate concentration decreased rapidly to the Point of 33 cm from the bottom. The results suggest that an appropriate thickness of permeable reactive barriers is about 30 cm.

• Journal of Applied Biological Chemistry
• /
• v.50 no.4
• /
• pp.221-226
• /
• 2007

The high molecular-weight mucilage extracted and purified from cactus fruit of Opuntia ficus-indica var. Saboten was degraded by the cell-free culture filtrate of a fungus isolated from soil. TLC analysis of the polymeric mucilage after incubation with the fungal culture filtrate confirmed its degradation. When the degradation products were tested for their qualitative reactions with ninhydrin and phenol-sulfuric acid, only phenol-sulfuric acid gave positive development, and ninhydrin did not show any observable color reaction. This coloring reaction suggested the presence of a carbohydrate without an amino group within the mucilage. Analyses by HPLC and liquid gel permeation chromatography on sephadex G-100 also provided additional information on degradation of the mucilage by the fungal culture filtrate. The sequences of ITS-5.8S rDNA from the fungal isolate that was cultivated for the preparation of mucilage-degrading enzyme showed 99% similarity to those of Pestalotiopsis aquatica.

• Membrane Journal
• /
• v.30 no.4
• /
• pp.205-212
• /
• 2020

This short review focuses on fouling by proteins and macromolecules in microfiltration/ultrafiltration. First, an experimental system that enables investigation of how the extent of the adsorption of proteins and macromolecules on membrane surfaces contributes to a decrease in filtrate flux in microfiltration/ultrafiltration is described. Using this system, a causal relationship - not a correlation - indicating that adsorption results in a decrease in filtrate flux could be clearly demonstrated in some cases. Second, a hydration structure at the membrane surface that can suppress adsorption is discussed, inspired by biomaterial research. In their hydrated states, polymers with low-fouling properties have water molecules with a particular structure. Finally, some successful examples of the development of low-fouling membranes via surface modification using low-fouling polymers are discussed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.852-858
• /
• 1998

We have isolated a bacterial strain that tends to kill P. micans from the mixed culture of p. minns plus seawater filtrate (poresize, 0.8 $\mu$m) collected at Masan bay in July 1996, in which the mixed culture grown in the f/2 medium. According to the experimental results of the isolated bacterium such as fatty acids analysis, morphological and biochemical characteristic tests, the strain was supposed to be a Pseudomonas and then it was named as Pseudomonas sp. LG-2. The killing effect of Pseudomonas sp. LG-2 against P. micans was proportionally increased with the concentrations of culture filtrate (pore size, 0.8 $\mu$m) is well as with the number of bacterium inoculated. In the mixed culture inoculated with $1.3\times10^6$ cells/ml of Pseudomonas sp. LG-2, the number of P. micans (2,000 cells/ml) was gradually decreased and then killed below 100 cells/ml within 7 days. In addition, the culture filtrate with $30\%$ of final concentration revealed a significant killing effect against P. micans around 3 days after culture. In the relationship between killing effects and growth stage of Pseudomonas sp. LG-2, the culture filtrate at lag phase has little effects on P. micans. In constant, the culture filtrate at mid-log phase showed the killing effect by decreasing P. micans to 112 in number within 5 days. In particular, the culture filtrate at stationary phase showed a significant killing effect against P. micans in which the majority of it was killed after 3 day culture. The species specificity of killing effects of Pseudomonas sp. LG-2 against 5 species of dinoflagellate was only found in P. micans and Scrippsiella trochoidea.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.3
• /
• pp.287-297
• /
• 2014

It is important to predict chlorine decay with different water purification processes and distribution pipeline materials, especially because chlorine decay is in direct relationship with the stability of water quality. The degree of chlorine decay may affect the water quality at the end of the pipeline: it may produce disinfection by-products or cause unpleasant odor and taste. Sand filtrate and dual media filtrate were used as influents in this study, and cast iron (CI), polyvinyl chloride (PVC), and stainless steel (SS) were used as pipeline materials. The results were analyzed via chlorine decay models by comparing the experimental and model parameters. The models were then used to estimate rechlorination time and chlorine decay time. The results indicated that water quality (e.g. organic matter and alkalinity) and pipeline materials were important factors influencing bulk decay and sand filtrate exhibited greater chlorine decay than dual media filtrate. The two-component second-order model was more applicable than the first decay model, and it enabled the estimation of chlorine decay time. These results are expected to provide the basis for modeling chlorine decay of different water purification processes and pipeline materials.

• Membrane and Water Treatment
• /
• v.8 no.3
• /
• pp.279-292
• /
• 2017

This study was aimed at ultrafiltration (UF) as a pretreatment before reverse osmosis (RO) within the scheme of hybrid reverse osmosis-multistage flush (RO-MSF) desalination. Seawater at elevated temperature (after MSF heat-exchangers) was used as a feed in this process. The pretreatment system was represented as a set of functionally-linked technological segments such as: UF filtration, backwashing, chemical- enhanced backwashing, cleaning, waste disposal, etc. The process represents the sequences of operating cycles. The cycle, in turn, consists of the following unit operations: filtration, backwashing and chemical-enhanced backwashing (CEB). Quantitative assessment was based on the following indicators: normalized permeability, transmembrane pressure, specific energy and water consumption, specific waste generation. UF pre-treatment is accompanied by the following waste streams: $W1=1.19{\times}10$ power of $-2m^3$ (disposed NaOCl with 0.0044% wt.)/$m^3$ (filtrate); $W2=5.95{\times}10$ power of $-3m^3$ (disposed $H_2SO_4$ with 0.052% wt.)/$m^3$(filtrate); $W3=7.26{\times}10$ power of $-2m^3$ (disposed sea water)/$m^3$ (filtrate). Specific energy consumption is $1.11{\times}10$ power of $-1kWh/m^3$ (filtrate). The indicators evaluated over the cycles with conventional (non-chemical) backwashing were compared with the cycles accompanied by CEB. A positive impact of CEB on performance indicators was demonstrated namely: normalized UF resistance remains unchanged within the regime accompanied by CEB, whereas the lack of CEB results in 30% of its growth. Those quantitative indicators can be incorporated into the target function for solving different optimization problems. They can be used in the software for optimisation of operating regimes or in the synthesis of optimal flow- diagram. The cycle characteristics, process parameters and water quality data are attached.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.11
• /
• pp.1549-1556
• /
• 2012

Endophytic fungi were isolated from roots of six halophytes in Suncheon Bay. The endophytic fungi of 35 species isolated from halophytes were identified by internal transcribed spacer (ITS) containing the ITS1, 5.8s, and ITS2 regions. All fungal strains were analyzed to diversity at the genus level. Fungal culture filtrates (FCF) of endophytic fungi were treated to Waito-c rice (WR) seedling for plant growth-promoting verification. It was confirmed that fungal strain Sj-2-2 provided plant growth promotion (PGP) to WR seedling. Then, PGP of Suaeda japonica was confirmed by treating culture filtrate of Sj-2-2. As a result, it was verified that culture filtrate of Sj-2-2 had more advanced PGP than positive control when treated to S. japonica. The secondary metabolites involved in culture filtrate of Sj-2-2 were identified by HPLC and GC-MS SIM analysis. The presence of physiologically bioactive gibberellins (GAs) and other inactive GAs in culture filtrate of Sj-2-2 was detected. The molecular analysis of sequences of Sj-2-2 showed the similarity to Penicillium sp. of 99% homology. The PGP of Sj-2-2 as well as symbiosis between endophytic fungi and halophytes growing naturally in salt marsh was confirmed. Sj-2-2 was identified as a new fungal strain producing GAs by molecular analysis of sequences. Consequently, the Sj-2-2 fungal strain was named as Penicillium sp. Sj-2-2. In this study, the diversity of endophytic fungi isolated from roots of halophytes in salt marsh and the PGP of a new gibberellin-producing fungal strain were confirmed.

• Journal of the Korean Society of Tobacco Science
• /
• v.28 no.2
• /
• pp.117-123
• /
• 2006

The pulping process in a papermaking process for a reconstituted tobacco sheet (RECON) was evaluated. For the practical information, the experiments were conducted in a real mill. Two pulping conditions were chosen and changed depending on the feasibility, such as the pulping temperature and the properties of pulping water. The higher pulping temperature resulted in the easier dissolution of solubles from the raw materials. However, the efficiency of screw press process was decreased by the higher pulping temperature, which resulted in the reduction of the HWS and the concentration in the #1 screw press filtrate. The addition of SEL(Strong extracted liquor) to pulper affected the efficiency of dissolution and the final concentration of #1 screw press filtrate. Although the higher SEL resulted in the less dissolution of the solubles from the raw materials, the concentration of the #1 screw press filtrate was greatly increased by the higher addition of SEL, which could provide much better efficiency to the following evaporation process of the filtrate and could increase the whole productivity.

• The Korean Journal of Mycology
• /
• v.14 no.4
• /
• pp.273-280
• /
• 1986

The degree of autolysis and lytic enzyme production in the culture filtrate of Rhizopus oryzae was investigated. The formation of protoplast by using autolytic enzymes from Rh. oryzae was also attempted. Protoplasts were liberated from Rh. oryzae mycelium by lytic enzymes present in autolytic-phase culture filtrate. Maximum release of chitosanase and proteolytic enzyme into culture filtrate during autolysis was corresponded to maximum protoplast-liberating activity. High yields of protoplasts were obtained from 10 hr-age of Rh. oryzae mycelium with 0.5 M mannitol as osmotic stabilizer. The optimum temperature and pH for mycelium digestion were $25{\sim}30^{\circ}C$ and $6.0{\sim}6.5$ respectively. The mycelium of the 18 hours cultures were treated with autolytic enzyme in same volume of osmotic stabilizer at $30^{\circ}C$ for 5 hours and then it was confirmed by scanning electoron microscope that protoplast were produced beside the digesting cell wall of the fungi.

• The Korean Journal of Mycology
• /
• v.24 no.1 s.76
• /
• pp.49-55
• /
• 1996

This study was conducted to find out antifungal activities of entomopathogenic fungus, Metarhizium anisopliae, against phytopathogenic fungi, Fusarium oxysporum, Botrytis cinerea and Alternaria solani. M. anisopliae was confirmed its antagonistic effect through mycelial inhibition zone of phytopathogenic fungi by culture filtrate of the antagonist. The filtrate (30%: v/v) inhibited the conidial germination of B. cinerea and F. oxysporum to 21.5% (control: 88.2%) and 53.0% (control: 78.6%), respectively and delayed the start of spore germination about 8hours. Microscopic observations proved that the addition of 10% culture filtrate of M. anisopliae restricted the growth of phytopathogenic fungus, F. oxysporum, to the formation of chlamydospore. From these results, we concluded that an addition effect of the filtrate from M. anisopliae on culturing F. oxysporum was fungistatic.