• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.11-18
• /
• 2014

TSV(through silicon via) filling technology is making a hole in Si wafer and electrically connecting technique between front and back of Si die by filling with conductive metal. This technology allows that a three-dimensionally connected Si die can make without a large number of wire-bonding. These TSV technologies require various engineering skills such as forming a via hole, forming a functional thin film, filling a conductive metal, polishing a wafer, chip stacking and TSV reliability analysis. This paper addresses the TSV filling using Cu electrodeposition. The impact of plating conditions with additives and current density on electrodeposition will be considered. There are additives such as accelerator, inhibitor, leveler, etc. suitably controlling the amount of the additive is important. Also, in order to fill conductive material in whole TSV hole, current wave forms such as PR(pulse reverse), PPR(periodic pulse reverse) are used. This study about semiconductor packaging will be able to contribute to the commercialization of 3D TSV technology.

• Journal of Arbitration Studies
• /
• v.19 no.2
• /
• pp.229-243
• /
• 2009

The content industries environment has been undergoing significant changes due to rapid technological innovation and content market expansion. Interest in the industry is growing fast both in Asia and Europe. However, in Japan content industries are showing almost zero growth with no increase in overseas expansion. Until now, Japanese content industries have been able to grow based on domestic demands. Many different factors contributed to today's zero growth in Japanese content industries. Two main reasons are: 1) Their lack of interest in overseas expansion and 2) Insufficient investment in domestic human resources development. Considerable amounts of Japanese contents including films, music, games, and animations have been distributed in many Asian countries and today piracy problems in the region are at a serious level. According to 2004 records pirated editions accounted for 85%, 16%, 19%, and 36% in China, Korea, Hong Kong, and Taiwan respectively. Pirated editions bring economic losses to Japanese copyright profits. Making it worse, they weaken the motivation to create content and make it hard to activate cultural exchanges. Losses from copyright violations in Japanese content industries are expected to keep increasing in the future. In order to make Japan competitive and grow it is crucial to take proper measures to protect copyright infringements. This study considers the current situation of the Japanese content market, infringement issues in content which is causing many problems in Asian countries, including China, and facts about losses caused by this problem.

• Journal of Contemporary Eastern Asia
• /
• v.17 no.1
• /
• pp.94-111
• /
• 2018

This study examines Korea's international development volunteer program as a citizen diplomacy initiative. Informed by a cultural perspective of transmission and relational models of public diplomacy, I examine the ways in which volunteer training incorporates cultural-learning into its program. The study finds that volunteer training is largely based on an instrumentalist approach to culture that places emphasis on learning the "explicit" side of culture, such as Korean traditional dance, art, and food as a strategy to promote the country's national image. In contrast, much less covered in the training program is a relational approach to culture-learning that is guided by a reflexive understanding of the "implicit" side of culture, or the values and beliefs that guide the worldviews and behavior of both volunteers and host constituents. Whereas the value of the volunteer program as a citizen diplomacy initiative is in its potential to build relationships based on two-way engagement, its conception of culture is mostly guided by that of the transmission model of public diplomacy. Based on the findings, this study calls for an integrated approach to culture-learning in volunteer training program to move the citizen diplomacy initiative forward.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.1
• /
• pp.125-136
• /
• 1993

The geometrically standardized intraoral radiographs using 5 occlusal registration materials were taken serially from immediate, 1 day, 2, 4, 8, 12, and 16 weeks after making the bite blocks. And the resultant images were digitally subtracted using the immediately taken film as reference images. The qualities of those subtracted images were evaluated to check the degree of reproducibility of each impression material. The results were as follows: 1. The standard deviations of the grey scales of the overall subtracted images were 4.9 for Exal1ex, 7.2 for Pattern resin, 9.0 for Tooth Shade Acrylic, 12.2 for XCP only, 14.8 for Impregum. the lesser the standard deviation, the better the quality of the subtracted images. 2. The standard deviation of the grey scales of the overall subtracted images were grossly related to those of the localized horizontal line of interest. 3. Exaflex which showed the best subtracted image quality had 15 cases of straight, 14 cases of wave, 1 case of canyon shape. Impregum which showed the worst subtracted image quality had 4 cases of straight, 8 cases of wave, 18 cases of canyon shape respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.199-202
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on two kinds of polyimide (PI) surfaces using thin plastic substrates. The generated NLC pretilt angles on the pre-imidized type PI are about $3.8^{\circ}$ by the rubbing alignment method with thin plastic substrates, However, the pretilt angle measured at about $2.8^{\circ}$ lower on the polyamic acid type PI than by pre-imidized type PI surface with thin polymer film. The tilt angle increases as increasing curring temperature for making polyimide layer using polyamic acid type PI. It was concluded that pretilt angle in the polyimide surface is attributable to the increasing of imide rato.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.4
• /
• pp.27-33
• /
• 2008

Polyethylene terephtahalate has been used in several areas such as fiber, film, bottle, and disposable products. Production of PET has been rapidly increasing these days. Since PET is a semi-permanent material, it has a non-biodegradable character in itself. Wasted PET products can cause serious environmental problems. Many countries around the world impose environmental legal restrictions over their abandonments. Many researches on the enviromental influence factors and treatment techniques of the wasted PET have been carried out. The main objective of this study is to develop a new sizing agent using recycling PET and improve its internal sizing effect. Dried powder of PET was used to make the modified PET. After extracting water-dispersible PET by subcritical hydrolysis, polyester resins have been extracted and triphenyl phosphate(TPP) has been added to obtain optimal internal sizing agent. It was found that the optimum dosage of TPP was 2% (per PET weight) and the hydrolysis temperature was independent on making the modified PET.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.4
• /
• pp.181-189
• /
• 2012

The demand on quantitative measurement of the heat flux is motivated in making higher-quality steel product through a water quenching process of plate mill. To improve a spatial degree of heat flux measurement, the multi-point heat flux measurement was carried out by a unique experimental technique that has a combination of the existing single-point heat flux gauge. The corresponding heat flux can be easily determined by Fourier's law in a conventional way. The multi-point heat flux gauge developed in this study can be applicable to measure the surface heat flux, the surface heat transfer coefficient during a water quenching applications of steelmaking process. The results exhibit different heat transfer regimes; such as single-phase forced convection, nucleate boiling, and film boiling, that are occurred in close proximity on the multi-point heat flux gauge quenched by water impinging jet.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.139-147
• /
• 2017

In this study, interesting area of development is retro-reflective thin film and then slitting to form retro-reflective material to be conbined with other fibers to form having retro-reflective characteristics, which slitting yarn can then be to provide fabrics. Glass beads are microscopic spherical size with diameters ranging from several microns to several millimeters. Applying the effects of optical property, glass beads are consumed for road safety used to make traffic signs, safety clothing and others. Glass beads retro-reflective films can be turned into slit yarns through slitting yarn process. The slit yarns can be combined into textiles using diverse methods such as weaving to provide a fabric having retro-reflective characteristics. Lightness and Luminance was increased with decreasing of interval of slit yarn in the fabric. Also, the hue is shifted greenish and bluish with interval of slit yarn.

• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.45-51
• /
• 2000

It was thought that the stiffness of a coated specimen became lower than that of the solid wood because the stiffness of the dried film of coating material is lower than that of the solid wood. The authors were trying to compare the effect of lacquer varnish and rhus lacquer on the resonant frequency of the solid woods for the violin, spruce and maple. Vibration modal shape of coated specimens were same to those of solid woods, but the frequency became lower at each mode as were expected regardless of coat. frequency decrement of coated specimen was getting larger at upper mode in both European violin woods, however, rhus lacquer coated spruce specimens were less affected than lacquer varnish coated specimens.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.1
• /
• pp.4-7
• /
• 2012

Coated conductors have been developed to increase piece length and critical current for electric power applications. Otherwise, Many efforts were carried out to reduce AC loss of coated conductor for AC applications. Twisting and cabling processes are effective to reduce AC loss but, these processes can not be applied for tape shaped coated conductor. It is inevitable to have thin rectangular shape because coated conductor is fabricated by thin film deposition process on metal substrate. In this study, round shape superconducting wire was first fabricated using coated conductors. First of all, Ag coated conductor was used. coated conductor was slitted to several wires with narrow width below 1mm. 12ea slitted wires were parallel stacked on top of another until making up the square cross-section. The bundle of coated conductors was heat treated to stick on each other by diffusion bonding and then copper plated to make round shape wire. Critical current of round wire was measured 185A at 77K, self field.