• The Journal of Information Technology
• /
• v.7 no.2
• /
• pp.1-5
• /
• 2004

The symmetric 9-phenyl-5,5'-diphenyl-3,3'-bis-(3-sulfopropyl)-benzoxazolo carbocyanine triethyl ammonium salt is of industrial importance as green-sensitizing dye in the spectral sensitization of emulsion microcrystals in negative film and positive paper-making. The stability on the solvents of benzoxazolo carbocyanine dye was measured by UV-Vis spectrophotometer, and then dye was stabilized in various solvents. The maximum absorption peak range in various solvents was 507nm~515nm. It was identified that the solvents can be used to photographic emulsion.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.59-66
• /
• 1998

Two-packaged polyurethane coatings were prepared by blending benzoic acid lactone modified polyester polyol(BLMPs) and HDI-biuret. BLMPs were synthesized by polycondensation of benzoic acid, viscosity depression component, with 1,4-butanediol, adipic acid, and polycaprolactone polyol. Kinematic viscosity of BLMP was gradually decreased with increasing benzoic acid content in BLMP. The low viscosity of modified polyester has an advantage of making a high-solid content coatings. After the film was coated with the prepared polyurethane coatings and cured at room temperature, the various physical properties were measured. They showed good physical properties such as flexibility, impact resistance, cross hatch adhesion, yellowness index, and rust resistance. These advantages are the results of introducing polycaprolactone polyol.

• Proceedings of the Korea Contents Association Conference
• /
• 2011.05a
• /
• pp.419-420
• /
• 2011

본 논문의 목적은 실시간 인터렉티브가 가능한 3D 입체영상의 구현 방법에 있다. 기존의 입체영상 구현 방식의 광학적이며 하드웨어적인 한계범위를 실시간 구현을 통해 보정해 보는 것과 동시에 색합성을 통한 기초적 입체영상 방법을 실험해봄으로써 입체영상의 제작방법만이 아닌, 상호작용을 통한 입체깊이감의 구현이라는 새로운 기능성을 탐구해 보고자 함에 근본 목적이 있다. 이를 위해 사용된 영상구현시스템은 Max/Msp/Jitter를 사용하였으며, 실질적으로 입체감의 깊이감있는 재현을 위한 실험으로는 피터 위머(Peter Wimmer)가 제안한 애너그리프 합성방법을 사용해 보았다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.237.1-237.1
• /
• 2011

Resistivity of GaN has been investigated under the influence of ion implantation. n-type, p-type and also undoped GaN has been used here. A ring shape pattern of Au was fabricated on GaN film by the photolithography technique. H, He and Ar were used for implantation. The ion implantation energy, fluence and post-implant annealing temperature varied in this research. Because of the making barrier in some selected area using ions, the resistivity changed in all the samples with the change of both fluence and energy. At room temperature, the resistivity of n-type GaN has been increased from $1.9{\times}10-2$ to $17.7{\times}10-2\;{\Omega}-cm$. This is high for He ion. But undoped and p-type GaN showed some anomalous character.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.360-360
• /
• 2006

Zein protein is one of the best biopolymer for edible film making and polyols are convenient plasticizers for biopolymers. Sorbitol, glycerol and manitol at three levels (0.5, 0.7, 1g/g of zein) were used as plasticizers. Rheological and thermal properties of zein resins were studied for determining their plasticization effectiveness. Sorbitol and glycerol had good plasticizing effects and could decrease viscoelastic modulus of zein resins considerably, but manitol was not as effective as them. Effects of plasticizers on thermal properties of resins were investigated by DSC at -100 to $150^{\circ}C$. No crystallization and melting peaks related to zein resin and plasticizers were observed. Thermograms showed that polyolic plasticizers and zein resin remained a homogeneous material throughout the cooling and heating cycles.

• The Journal of Korean Academy of Prosthodontics
• /
• v.9 no.1
• /
• pp.79-83
• /
• 1969

1) 가능(可能)한한 조직(組織)이 변형(變形)되지 않아야 한다. 2) Atmospheric pressure를 이용(利用)하기 위(爲)하여 peripheral border 에 있어서의 조직변형(組織變形)이 필요(必要)한 경과(境過)는 그 정도(程度)가 eiastic force가 retentive force 보다 크지 않도록 최소한(最小限)으로 해야 한다. 3) Denture base와 조직(組織)의 원형간(原形間)에는 접촉(接觸)이 밀접(密接)해야 한다. 그래야 saliva의 film 균일(均一)하고 얇게 될 수 있다. 4) Atmospheric pressure는 denture의 retention과 중요(重要)한 연관성이 있으므로 physiologic seal area를 형성(形成)해 주는 것이 유리(有利)하다. 5) Ridge의 형태(形態)도 denture의 retention 대(對)한 하나의 중요(重要)한 인자(因子)이다. 6) Denture에 의(依)해서 피개(被蓋)되는 면적(面積)은 retention에 관계(關係)되는 한 인자(因子)로써 피개면적(被蓋面積)이 클수록 유지력(維持力)이 커진다. 7) Saliva의 viscosity도 retention의 한 인자(因子)가 된다. 8) Friction은 retention의 한 인자(因子)가 될수는 있으나 병인적(病因的)인 증상(症狀)을 유발(誘發)할수 있으므로 이용(利用)해서는 않된다.

• Corrosion Science and Technology
• /
• v.14 no.4
• /
• pp.195-199
• /
• 2015

Materials of choice for offshore structures and the marine industry have been increasingly favoring materials that offer high strength-to-weight ratios. One of the most promising families of light-weight materials is titanium alloys, but these do have two potential Achilles' heels: (i) the passive film may not form or may be unstable in low oxygen environments, leading to rapid corrosion; and (ii) titanium is a strong hydride former, making it vulnerable to hydrogen embrittlement (cracking) at high temperatures in low oxygen environments. Unfortunately, such environments exist at deep sea well-heads; temperatures can exceed $120^{\circ}C$, and oxygen levels can drop below 1 ppm. The present study demonstrates the results of investigations into the corrosion behavior of a range of titanium alloys, including newly developed alloys containing rare earth additions for refined microstructure and added strength, in artificial seawater over the temperature range of $25^{\circ}C$ to $200^{\circ}C$. Tests include potentiodynamic polarization, crevice corrosion, and U-bend stress corrosion cracking.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.14-14
• /
• 2010

Recently, low temperature co-fired ceramic (LTCC) technology has gained a remarkable application potential in sensors, actuators and micro systems fields because of its very good electrical and mechanical properties, high reliability and stability as well as possibility of making 3D micro structures. In this study, we investigated the effects of annealing treatment on the electrical properties of $Pb(ZrTi)O_3$ (PZT) thin films deposited on LTCC substrate. PZT thin films were deposited on Au / LTCC substrates by RF magnetron sputtering method. Then, the change of the crystallization of the films were investigated under various annealing temperatures and times. The results showed that the crystallization of the films were enhanced as increasing annealing temperatures. The film, annealed at $700^{\circ}C$, 3min, was well crystallized in the perovskite structure.

• 전자공학회논문지 IE
• /
• v.46 no.3
• /
• pp.62-67
• /
• 2009

In this paper, ROC curves were designed by using Fuzzy Logic Systems. ROC curve is used for diagnostic evaluation and the person evaluating ROC curve is chosen as a first-level diagnostician. For rating diagnostic capability on ROC curve through learning, the chest X-ray image is used. The images used for making a diagnosis are X-ray film being both noise and signal. The result over diagnostic capability difference between the male and the female represented a man had better than a woman but that difference can be ignored.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.3
• /
• pp.199-203
• /
• 1999

The symmetric benzoxazolo carbocyanine is of industrial importance as green-sensitizing dye in the spectral sensitization of emulsion microcrystals in positive paper and negative film-making. The stability on the solvents of benzoxazolo carbocyanine dye was measured by UV-Vis spectrophotometer, and then all of solvents were stabilized sensitizer. The maximum absorption peak range in methanol, acetonitrile, acetone, DMF, dichloromethane, chloroform solvents was $501nm{\sim}511nm$. But it was identified that only methanol can be used to photographic emulsion. The photographic characteristics have contrast of 2.8, speed of 50-55$(lux{\cdot}sec)^{-1}$, fog of 0.07-0.08, respectively.