• 대한방사선치료학회지
• /
• 제18권2호
• /
• pp.67-73
• /
• 2006

목 적: 암 환자의 증가와 함께 방사선 치료기술도 날로 발전하고 있으며 이로인해 치료를 위해 사용되는 영상 및 데이터의 양들도 대폭 증가하는 결과를 가져오게 되어 이들을 저장, 보관, 관리하는데 많은 어려움이 있었다. 이러한 문제점 해결을 위해 과에서 발생되는 모든 영상 및 data의 PACS (picture archiving and communication system)화를 목적으로 의료정보팀의 협조 하에 본 System을 개발, 적용하게 되었다. 대상 및 방법: 본과 방사선치료 관리 시스템(RO-radiation oncology)에서 PACS에 접근할 수 있는 code를 부여한 후 영상은 R&V (Record and Verify: Varis vision, Varian, USA) 시스템 및 planning system에서 export 한다. 이때 DICOM (digital image and communication system) head에 있는 많은 정보들 중에서 필요한 정보를 이용하여 프로그램화 하였다. 결 과: 방사선종양학과에서 발생되는 모든 영상 및 자료 즉, 모의치료, CT, L-gram 영상, structure (normal organ & target volume), DRR (Digital Reconstruction Radiography), 선량 분포도, DVH (dose volume histogram) 등을 PACS에 구현 하였으며 과내 어느 컴퓨터에서도 선명히 영상을 볼 수 있고 출력할 수 있도록 하였다. 결 론: 본 시스템의 개발로 film less화가 가능하게 되어 현상 처리에 관련한 암실 공간과 유지비용이 소멸되었고 film 저장공간 및 film을 찾는데 소요되는 인력과 시간을 포함한 유, 무형의 경제적 비용뿐만 아니라 영상 저장을 위한 별도의 저장장치의 구입도 불필요하게 되었다. 아울러 방사선 치료를 위해 복잡하게 행해졌던 일련의 과정들이 본 시스템을 통해서 현재는 전산 상에서 쉽게 처리할 수 있게 되어 업무에 많은 도움이 될 것으로 사료된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.1912-1915
• /
• 2007

The disjoining pressure is critical in modeling the transport phenomena in small scales. They are very useful in characterizing the non-continuum effects that are not negligible in heat and mass transports in the film of less than submicro-scales. We present he disjoining pressure of thin film absorbed on solid substrate using Molecular Dynamics Simulation (MD). The disjoining pressure with respect to the film thickness is accurately calculated in the resolution of a molecular scale. The characteristics of the pressure are discussed regarding the molecular nature of the fluid system like molecular diameter and intermolecular interaction. Also, the MD results are compared with those based on the macroscopic approximation of the slab-like density profile. Significant discrepancy is observed when the effective film thickness is less than several molecular diameter

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.103-108
• /
• 2005

In this study, to develop a flash-less mold for forming of shoe-outsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, offset method and mass distribution method are used in the preform design. The vertical mold structure pressing the preform was introduced to produce a flash-less shoe-sole. To measure the contact status of parting surface of mold, the pressure film has been used. The guide-gutter system and the continuous pressing mold have been developed for the discharge of extra-materials and re-pressing. By the investigation, flash of shoe-outsole was considerably reduced.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.49-54
• /
• 1989

Thin solid film systems polarizing beam splitter and disk amplifier used in the high power laser system ({{{{ lambda }}0=1060nm) are designed by computer aided optimization technique. Extinction ratio of designed polarizing beam splitter for incidence angle 30$^{\circ}$, 45$^{\circ}$, 55.60$^{\circ}$ are 1:93, 1:895, 1:1991. respectively. Maximum reflectance of designed thin film system of disk amplifier is less than 3% for pumping band (500-900nm) and 0.15% for laser beam. Further, SiO film chosen as one of the suitable thin films in the high power laser system is prepared by the sol=-gel process which gives high damage threshold. When the withdrawal speed is 6.15cm/min -16.62 cm/min and the mixing ratio is in the range of 1 mol (ethylsilicate): 4-8mol(ethylalcohol) : 2mol(water), the thickness of deposited film is in the range of 500{{{{ ANGSTROM }}-1500{{{{ ANGSTROM }}.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.218-218
• /
• 2011

The CIGS Solar Cells have the highest conversion efficiency in the film-type solar cells. They consist of p-type CuInSe2 film and n-type ZnO film. The CdS films are used as buffer layer in the CIGS solar cells since remarkable difference in the lattice constant and energy band gap of two films. The CdS films are toxic and make harmful circumstances. The CdS films deposition process need wet process. In this works, we design and make the hitter and lamp reflection part in the sputtering system for the ZnS films deposition as buffer layer, not using wet process. Film thickness, SEM, and AFM are measured for the uniformity valuation of the ZnS films. We conclude the optimum deposition temperature for the films uniformity less than 1.6%. The ZnS films deposited by the sputtering system are more dense and uniform than the CdS films deposited by the Chemical Bath Deposition Method(CBD) for the CIGS Solar Cells.

• International Journal of Ocean System Engineering
• /
• 제2권2호
• /
• pp.106-115
• /
• 2012

In the present study, TiN and CrN films were coated by arc ion plating equipment onto aluminum alloy substrate, A2024. The film thickness was about 4.65 ${\mu}m$. TiN and CrN films were analyzed by X-ray diffraction and energy dispersive X-ray equipments. The Young's modulus and the micro-Vickers hardness of aluminum substrate were modified by the ceramic film coatings. The difference in Young's modulus between substrate and coating film would affect on the wear resistance. The critical load, Lc, was 75.8 N for TiN and 85.5 N for CrN. It indicated from the observation of optical micrographs for TiN and CrN films that lots of cracks widely propagated toward the both sides of scratch track in the early stage of MODE I. TiN film began to delaminate completely at MODE II stage. The substrate was finally glittered at MODE III stage. For CrN film, a few crack can be observed at MODE I stage. The delamination of film was not still occurred at MODE II and then was happened at MODE III. This agrees with critical load measurement which the adhesive strength was greater for CrN film than for TiN film. Consequently, it was difficult for CrN to delaminate because the adhesive strength was excellent against Al substrate. The wear process, which the film adheres and the ball transfers, could be enhanced because of the increase in loading. The wear weight of ball was less for CrN than for TiN. This means that the wear damage of ball was greater for TiN than for CrN film. It is also obvious that it was difficult to delaminate because the CrN coating film has high toughness. The coefficient of friction was less for CrN coating film than for TiN film.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.567-570
• /
• 2010

With continuously increasing flat panel display size, uniformity of thin film deposition has been drawing more attentions and associated fabrication methodologies are being actively investigated. Since the convective flow field of mixture gas plays a significant role for deposition characteristics of thin film in an APCVD system, it is greatly important to maintain uniform distribution and consistent concentration of mixture gas species. In this paper, computational study has been performed for the improvement of flow uniformity of mixture gas in an APCVD reactor during thin film deposition process. A diffuser slit has bee designed to spread the locally concentrated gas flow exiting from the flow distributor. A uniform flow distributor has been developed which has less dependency on operating conditions for global flow uniformity

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.255-258
• /
• 2003

In this study, to develop a flash-less die for forming of shoe-outsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, of feet method and mass distribution method are used in the preform design. To improve the accuracy of contact surface of dies, the contact status of dies are measured by using the pressure film. The vertical pressing die structure and the guide-gutter system have been developed for the discharge of extra-materials and re-pressing. By the investigation, flash of shoe-outsole was considerably reduced.

• International Journal of Advanced Culture Technology
• /
• 제10권2호
• /
• pp.181-186
• /
• 2022

In this paper, we examine the shortening of the theatrical window whereby films play at theaters for 90 days as one of the most portentous issues that could reshape the Hollywood film industry. We first examine the windows system that protected the status of movie theaters and the studios' attempt to shorten the theatrical release to create a premium VOD window in response to the declining revenue of DVDs after 2007 and the rise of streaming services. We then look at some of the major disruptions in distribution COVID-19 brought about. We also explore the shortening of the theatrical release in the wake of the pandemic and shows the changes in the theatrical release, along with the expansion of streaming services, raise questions over the long-held primacy of the theatrical release and the definition of film with the theatrical release as its part. From this, we highlight Hollywood at the crossroads of major changes with its future less certain than ever before.

• 한국축산식품학회지
• /
• 제43권6호
• /
• pp.1128-1149
• /
• 2023

In order to extend the shelf life of refrigerating raw lamb by inhibiting the growth of microorganisms, preventing the oxidation of fat and protein, and absorbing the juice outflow of lamb during storage, an active packaging system based on plastic/gelatin bilayer film with essential oil was developed in this study. Three kinds of petroleum-derived plastic films, oriented polypropylene (OPP), polyethylene terephthalate, and polyethylene, were coated with gelatin to make bilayer films for lamb preservation. The results showed significant improvement in the mechanical properties, oxygen, moisture, and light barriers of the bilayer films compared to the gelatin film. The OPP/gelatin bilayer film was selected for further experiments because of its highest acceptance by panelists. If the amount of juice outflow was less than 350% of the mass of the gelatin layer, it was difficult for the gelatin film to separate from lamb. With the increase in essential oil concentration, the water absorption capacity decreased. The OPP/gelatin bilayer films with 20% mustard or 10% oregano essential oils inhibited the growth of bacteria in lamb and displayed better mechanical properties. Essential oil decreased the brightness and light transmittance of the bilayer films and made the film yellow. In conclusion, our results suggested that the active packaging system based on OPP/gelatin bilayer film was more suitable for raw lamb preservation than single-layer gelatin film or petroleum-derived plastic film, but need further study, including minimizing the amount of essential oil, enhancing the mechanical strength of the gelatin film after water absorption.