• Journal of the Korean Vacuum Society
• /
• v.18 no.5
• /
• pp.337-345
• /
• 2009

When the drill hole diameter for the package substrate is under $100{\mu}m$, the smear in the drill hole cannot be eliminated by wet desmear process only. We intended to change the substrate's hydrophobic characteristics to hydrophilic characteristics by adapting the atmospheric pressure plasma prior to the wet desmear process. Atmospheric pressure plasma process was made as the inline type equipment which is adequate for the package substrate's manufacturing process and remote DBD type electrodes were used for the equipment. As the result of atmospheric pressure plasma processing, the contact angle of the substrate was enhanced from 71 degree to 30 degree. Dielectric film thickness, drill hole diameter and surface roughness were measured to evaluated the characteristics of the wet desmear process in case of plasma processing and in case of none. By the measurement, it was analyzed that the process uniformity within the whole panel was largely enhanced. Also, it was verified that the smear in the drill hole was eliminated efficiently which was analyzed by the SEM image of the drill hole.

• Korean Journal of Materials Research
• /
• v.20 no.8
• /
• pp.408-411
• /
• 2010

Indium doped $SnO_2$ thick films for gas sensors were fabricated by a screen printing method on alumina substrates. The effects of indium concentration on the structural and morphological properties of the $SnO_2$ were investigated by X-ray diffraction and Scanning Electron Microscope. The structural properties of the $SnO_2$:In by X-ray diffraction showed a (110) dominant $SnO_2$ peak. The size of $SnO_2$ particles ranged from 0.05 to $0.1\;{\mu}m$, and $SnO_2$ particles were found to contain many pores, according to the SEM analysis. The thickness of the indium-doped $SnO_2$ thick films for gas sensors was about $20\;{\mu}m$, as confirmed by cross sectional SEM image. Sensitivity of the $SnO_2$:In gas sensor to 2000 ppm of $CO_2$ gas and 50 ppm of H2S gas was investigated for various indium concentrations. The highest sensitivity to $CO_2$ gas and H2S gas of the indium-doped $SnO_2$ thick films was observed at the 8 wt% and 4 wt% indium concentration, respectively. The good sensing performances of indium-doped $SnO_2$ gas sensors to $CO_2$ gas were attributed to the increase of oxygen vacancies and surface area in the $SnO_2$:In. The $SnO_2$:In gas sensors showed good selectivity to $CO_2$ gas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.3
• /
• pp.273-281
• /
• 2001

Digital subtraction radiography may be one of the most precise and noninvasive methods for assessing subtle density changes in peri-implant bone, providing additional diagnostic information on implant tissue integration in overall maintenance. The aims of this study were to evaluate density changes after first, second surgery of dental implant and to measure the amount of marginal bone loss 9 months after second surgery using digital subtraction radiography. Bone change around 30 screw-shaped implants in 16 patients were assessed on radiographs. 17 Branemark implants of 3.75mm in diameter(Nobel Biocare, Goteborg, Sweden), 2 Branemark implants of 5.0mm in diameter, 11 $Replace^{TM}$ implants of 4.3mm in diameter(Nobel Biocare, Goteborg, Sweden) were used. To standardize the projection geometry of serial radiographs of implants, customized bite block was fabricated using XCP film holder(Rinn Corporation, Elgin, IL.) with polyether impression material of Impregum(ESPE, Germany) and direct digital image was obtained. Qualitative and quantitative changes on radiographs were measured with Emago software(The Oral Diagnostic System, Amsterdam, Netherlands). The results were as follows: 1. The peri-implant bone density of 69.2% implants did not change and the peri-implant bone density of 30.8% implants decreased after 3 months following first surgery. 2. The crestal bone density of 53.9% implants decreased first 3 months after second surgery. The crestal bone density of 58.8% implants increased 9 months after second surgery. No density change was observed around the midportion of the implants after second surgery, 3. The amount of marginal bone loss between different kinds of implants showed no statistically significant differences (p>0.05). 4. More than 90% of total marginal bone loss recorded in a 9-month period occurred during the first 3 months.

• Journal of the Korean Society of Costume
• /
• v.63 no.5
• /
• pp.151-166
• /
• 2013

In order to create a national myth and be able to control international society, America with her short national history, used popular culture to accomplish these goals. The medium fit this purpose the best was the use of superhero characters based on comics. Born and developed from the 1930s through the 1960s, which could be seen as America's national crisis era, superhero characters were thorough advocates of American justice and was perfect for the role of spreading the legitimacy of American ideology. From the 1970s, superhero characters became part of movies and became even more influential through the Hollywood's massive film industry and the box office success. American ideology in superhero characters symbolically appeared in movie costumes. Starting with Superman and Batman, the very first and typical superhero characters' costumes work as metaphors for realization of American justice. After the 1980s, superheroes were newly developed through a genre called graphic novel and the most representative piece of this genre is Alan Moore's Watchmen. In the Watchmen, which was also turn into a movie in 2009, six changed superhero characters appear ranging from a non-human superhero, villain superhero, superhero with mental disorder and superhero with sexual impotency, the characters were never-seen-before superheroes with different aspects that connote introspection and philosophical ideology. The changed type of heroes and ideology became another form of heroes, and this brought changes to character costumes that were never considered before. The superhero costumes that used to symbolize America now express different types of superhero by borrowing exotic mythical elements, undressing, pastiche and daily life clothes. The superhero characters and their changes in costumes from Watchmen imply American popular culture's introspective tendency. Amongst these changes, we need to raise our critical vision towards popular culture.

• Proceedings of the SCSK Conference
• /
• 1999.10a
• /
• pp.97-110
• /
• 1999

The new stick make-up product was studied by using a gel, which is a viscous complex formed with clay minerals, vitamins A and I and fluorinated liquid polymer with a 1500 molecular weight. The gel cannot be obtained with any random combination of clay minerals and the ingredients described above. It takes the sequential manufacturing method as follows to get this kind of gel. Firstly, clay minerals and liquid polymers have ·to be pre-mixed in order to saturate the liquid polymers with the clay minerals. Then tile on-processed gel has to be finely crystallized. The clay minerals, which are the core elements for this gel, were used as a function of Binder & Buffer and liquid polymer was mixed together for the deterioration of the surface tension of each component and to from a functional film in the gel. This liquid polymer was combined with clay minerals because it is not miscible with most oils and solvents. Waxes have a function of keeping a solid status in the stick. We reduced the usage of waxes by putting clay minerals as buffer in the proportion of 0.5 : 1 with oil phase. Ceramide takes care of the skin when used regularly and maintains the skin’s moisture. Vitamins A and I contribute to preventing skin’aging by the activation of skin cells. We could get the stable viscous gel, which has about 80% oil phase using clay minerals and liquid polymer, The crystal 1 me structures of gel were surface-chemical1y-analyzed using SEM and Image Analyzer and were thermodynamically analyzed using DSC, Surface tension test and softness were done by Rheometer. In the end, these characteristics were verified by consumer panel tests in Seoul, Baegeon and Pusan in Korea and Hokkaido, Oska and Miyazaki in Japan with correlation to the climate.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.340-344
• /
• 2005

Microlens cells of Ge-doped BPSG (Boro-Phospho-Silicate Glass) are fabricated by dicing the film produced by FHD (Flame Hydrolysis Deposition). Microlens arrays of $53.4{\mu}m$ square unit are produced by the thermal reflow of the diced unit cells at $1200^{\circ}C$. The gap between the microlenses was about $70{\mu}m,$ and the thickness of the produced lens was about $28.4{\mu}m$. We analyzed the reflowed shape of the microlens cell by an image-process technique, and the focal length was about $62.2{\mu}m$. This method of fabricating a microlens is simple and inexpensive compared to the conventional method using the photolithographic process. Also, the control of the radius of curvature of the microlens is easier and a more precise microlens way of various types can be fabricated using this method.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.7-16
• /
• 1998

The Scanora/sup (R)/ X-ray unit uses the principles of narrow beam radiography and spiral tomography. Starting with a panoramic overview as a scout image. multiple tomographic projections could be selected. This study evaluated the accuracy of spiral tomography in comparison to routine panoramic radiography for dental implant treatment planning. An experimental study was performed on a cadaver mandible to assess the accuracy of panoramic radiography and spiral tomography film images for measurement of metallic spheres. After radiographic images of the metallic spheres on the surgical stent were measured and corrected for a fixed magnification of radiographic images. following results were obtained. 1. In the optimal position of the mandible. the minimal horizontal and vertical distortion was evident in the panoramic radiography images. The mean horizontal and vertical magnification error in anterior sites was 5.25％ and 0.75％. respectively. The mean horizontal and vertical magnification error in posterior sites was 0.50％ and 1.50％. respectively. 2. In the displaced forward or in an eccentric position of the mandible. the magnification error of the panoramic radiography images increased significantly over the optimal position. Overall, the mean horizontal magnification error of the anterior site in the different positions changed dramatically within a range of -17.25％ to 39.00％, compared to the posterior range of -5.25％ to 8.50％. However, the mean vertical magnification error stayed with the range of 0.5％ to 3.75％ for all the mandibular positions. 3. The magnification effects in the tomographic scans were nearly identical for the anterior and posterior with a range of 2.00％ to 5.75％ in the horizontal and 4.50％ to 5.50％ in the vertical dimension, respectively. 4. A statistically significant difference between the anterior and posterior measurements was found in the horizontal measurements of the panoramic radiography images of the displaced forward and backward position of the mandible(P<0.05). Also a significant difference between the optimal panoramic and tomographic projections was found only in the vertical measurement(P<0.05).

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.275-282
• /
• 2017

With the development of digital technology, a cinematic content has been changed into various forms. Web and mobile platforms bring new forms of cinematic contents. However despite of fast growing of VR(Virtual Reality) technology, they haven't applied to cinematic contents yet. This research focused on the esthetical use of rotoscoping technique for the Virtual Reality Cinema based on the (HMD) Head Mounted Display. First, we look though on VR films 'Notes on Blindness' and 'Pearl' to find how these films express esthetical virtual space. Through this, we found out graphical space provide new esthetical experience to viewers in virtual space. Also, we analyze fantastical usages and successful cases of rotoscoping technique with the 'Waking Life' and 'Scanner Darkly' that utilize rotoscoping technique to live action image. Lastly, we utilize rotoscoping technique esthetically to the VR film 'Girl on a swing' to fulfill the viewers experience and desire.

• Journal of Korean Society of Archives and Records Management
• /
• v.5 no.2
• /
• pp.183-193
• /
• 2005

A large part of the vast amounts of information produced in the world is born digital, and comes in a wide variety of formats: text, database, audio, film, image. During the meeting of the Organization's Executive Board in May 2001, Member States agreed on the need for rapid action to safeguard digital heritage. The interest of UNESCO in this situation comes as no surprise. UNESCO exists in part to encourage and enable the preservation and enjoyment of the cultural, scientific and information heritage of the world's peoples. The growth of digital heritage and its vulnerability could hardly go unnoticed. Our societies have witnessed the end of the paradigm of the written archive, a paradigm that had developed over hundreds of years. Throughout the twentieth century new media have wisely and modestly joined this prestigious tradition. This paradigm has already been transformed, and the devices in place are unable to deal with the brutal advance of information technologies, and the quantitative inflation which they cause. This goes beyond those institutions specializing in the management of memory: a whole new regime of information will have to be constructed, and quickly, completely transforming old memory and archiving systems. If this shift does not take place, our societies will suffer irremediable damage in their collective social memory.

• Journal of the Korean association of regional geographers
• /
• v.4 no.2
• /
• pp.65-77
• /
• 1998

One of the fundamental, important preconditions for effective teaching of geography is to collect a variety of picture data available for class and to manage the data systematically. The purpose of this study is to present one method about how to supply basic picture data available for class of Korean geography for the high school program to teachers in service and how to collect, manage and utilize the data. A total of 233 picture data related to contents of the textbook of Korean Geography have been gathered through this study, and a database has been constructed for the data. Directories were generated for individual units of the textbook, and the collected picture data was stored in the image file of each directory. This data was recorded in a CD and attached as an appendix. Since the primary purpose of this study is to suggest one method, the picture data in a database for the present study is just a fraction of lots of data available for class of Korean geography. If the user persistently enlarges and manages data based on the results of this study, the data will become a good instructional aid. The picture data can be printed over the transparent film and used for class by using the overhead protector (OHP), or it can be also used as a remote self-study tool through the computer telecommunications network (e.g., LAN or INTERNET. etc,). Most desirable, however, is to develop teachers' own method by taking account of separate units of the textbook or diverse educational environments.