• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.222-228
• /
• 2002

A comparison of the welding performance of ship hull structural steels has been made. The weldability of steels especially designed for laser processing was compared to that of conventional hull and structural steels with plate thicknesses up to 12 mm. Autogenous laser beam welding was used to weld butt joints as well as skid and stake welded T-joints. The welds were assessed in accordance with the document "The Classification Societies′ Requirements for Approval of $CO_2$ Laser Welding Procedures". Small imperfections in the weld only grew slightly in root bend tests and they only had a minor influence on the fatigue properties of laser fillet welded joints. In Charpy impact tests, the 27 J transition temperature of the weld metal and HAZ ranged from below -60 to -5$0^{\circ}C$. The amount of martensite in the weld metal depended on the carbon equivalent of the steel with the highest amounts and highest hardness levels in conventional EH 36 (389 HV 5). Thermomechanically rolled steels contained less martensite and showed a correspondingly lower maximum hardness.

• International Journal of Korean Welding Society
• /
• 제1권1호
• /
• pp.17-22
• /
• 2001

Because the quantitative relationships between welding parameters and welding result are not yet blown, optimal values of welding parameters for $CO_2$ robotic arc welding is a difficult task. Using the various artificial data processing methods may solve this difficulty. This research aims to develop an expert system for $CO_2$ robotic arc welding to recommend the optimal values of welding parameters. This system has three main functions. First is the recommendation of reasonable values of welding parameters. For such work, the relationships in between the welding parameters are investigated by the use of regression analysis and fuzzy system. The second is the estimation of bead shape by a neural network system. In this study the welding current voltage, speed, weaving width, and root gap are considered as the main parameters influencing a bead shape. The neural network system uses the 3-layer back-propagation model and a generalized delta rule as teaming algorithm. The last is the optimization of the parameters for the correction of undesirable weld bead. The causalities of undesirable weld bead are represented in the form of rules. The inference engine derives conclusions from these rules. The conclusions give the corrected values of the welding parameters. This expert system was developed as a PC-based system of which can be used for the automatic or semi-automatic $CO_2$ fillet welding with 1.2, 1.4, and 1.6mm diameter the solid wires or flux-cored wires.

• 한국정밀공학회지
• /
• 제14권7호
• /
• pp.39-48
• /
• 1997

This paper describes the process planning system of a computer-aided design of blanking and piercing for irregularly shaped sheet metal products. An approach to the system is based on knowledge-based rules. The process planning system is designed by considering several factors, such as the complexity of blank geometry, production feasibility of products, and punch profile complexity. Therefore this system which was implemented production feasibility check and strip layout module can carry out a process planning considering a production feasibility area of both internal and external features, a dimension of blanked hole, a coner and a fillet radius for irregualrly shaped sheet metal products and generate the strip layout in graphic froms. Knowledges for process planning are extracted from plasticity theories, handbooks, relevant references and empirical know- hows of experts in blanking companies. This provides powerful capabilities for process planning system of irregularly shaped sheet metal products.

• Fisheries and Aquatic Sciences
• /
• 제5권1호
• /
• pp.59-63
• /
• 2002

Swim up fry of the Nile tilapia, Oreochromis niloticus, were fed 0 or 60 mg l7-methyltestos­terone (MT) per kg feed for 30 days. Fish that had been fed 0 or 60 ppm MT for the first 30 days were subsequently fed a commercial diet for 56 weeks to evaluate growth, survival, sex ratio, body composition, gonadosomatic index and the total edible portion. Mean body weight of MT treated group and untreated group were 1.7 g and 1.1 g, respectively at the end of the treatment for 30 days $(P<0.05)$. The experiment was terminated after a total of 60 weeks, the mean body weight of the MT treated population was 1,016 g and that of the untreated population was 762g $(P<0.05)$. However, the final mean body weight of untreated males (l, 086g) was not significantly different from treated males (l,016 g), but the mean body weight of the female group was 512 g. Therefore, the reason for the lower mean body weight of the untreated group was entirely due to stunted females. The percentage fillet yield of MT treated fish$(34.6\%)$ was not significantly different from that of the untreated males $(34.4\%)$, but the untreated females were lower than those of both treated and untreated male groups $(32.4\%)$ (P<0.05). There were no significant differences in the percentage of the all edible portion (AP) between MT treated and untreated males, but females were lower than males. Females are smaller fish in size and the gonads are larger in proportion which were discarded along with the intestine this explains the observed difference. Total biomass of the two groups were 134.8kg and 104.5kg per $m^3$, respectively. The proportion of fish reaching a marketable size of over 800 g in body weight within 14 months were $78\%$ in the MT treated group and $41\%$ in the untreated group.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.356-359
• /
• 2004

Above all Ni-alloys Inconel 625 is used widely in plate of welding structural materials such as turbine case, a combustor of liner. In general, weldability of Inconel 625 is not well because of poorly liquids of weld metal also it have a broken probability oj the welding crack. In case of FCAW weld process, it is not easy to develope of welding materials, because it is possible only fillet welding at view position of look down except for butt welding. But recently, though it is more used by FCAW process, owing to welding materials worked at the vertical position. the study for FCAW weld of Inconel 625 is actively not yet worked. In this study, the weldability and weld characteristics(mechanical characteristics, corrosive property) of Inconel 625 are considered in FC4W weld associated with the several shielding gases$80\%Ar\;+\;20\%\;CO_2,\;50\%Ar\;+\;50\%\;CO_2,\;100\%\;CO_2$ in viewpoint of welding productivity. The results of impact test are follows; It was evaluated 70J at shielding gase of $100\%\;CO_2$, and obtained about 35J at the other shielding gases. If it was used for parts be required the impact value at the extremely low temperature, it is expected to have the advantage of using the $100\%\;CO_2$ shield gase than the others.

• 대한영양사협회학술지
• /
• 제19권3호
• /
• pp.236-252
• /
• 2013

The purpose of this study was to assess the microbiological quality of home-delivered meals during production and delivery for children from low-income families. Production flows from a facility in Seoul that provides home-delivered meals were analyzed and the time-temperature of the food was measured. Microbiological assessment was performed for the production environment, personal hygiene, and food samples at each production and delivery step based on the process approach. It took 2 hours or longer from completion of production to meal delivery. An aerobic colony count (ACC) and coliform were not detected at knives, cutting boards, and dish towels. However, ACC (at pre-preparation, preparation, and packing areas) and coliform (at the preparation area) were detected on the hands and gloves of employees. Air-borne bacterial counts varied according to day and preparation area (ND~6 CFU/plate/15 min). Food temperatures, on the completion of production and meal delivery, fell into temperature danger zones. ACC and coliform counts of raw ingredients did not decrease after pre-preparation (washing and sanitizing) for menus involving food preparation with no cook step. ACC decreased after cooking step for menus of food preparation with cook step, but the ACC of the stir-fried and seasoned dried filefish fillet on the completion of cooking was too numerous to count due to improper heating. The ACC of seasoned young Chinese cabbages (a menu with complex food preparation) increased during delivery (from 2.5 log CFU/ml to 5.0 log CFU/ml). This qualitative assessment of foodborne pathogens revealed that B. cereus was detected in vegetable and meat product menus. These results suggest time-temperature control is necessary during production and delivery and management guidelines during production of home-delivered meals are provided for safe production.

• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1207-1212
• /
• 2015

진동리퍼는 암반의 파쇄와 리핑 작업을 동시에 하기 위해서 개발된 장비이며 기존의 암반 파쇄용 유압 브레이커와 작동 원리가 다르다 진동리퍼의 기진력을 투스로 전달하는 기어박스-생크 용접부는 매우 중요한 부분이며 진동리퍼의 기계적 건전성의 예측이 필수적이다. 본 연구는 생크소재 및 용접재료의 변화에 따른 접부의 피로수명 예측을 목적으로 하고 있다. 생크의 재료는 Hadox-hituf, AR 400을 사용하였고 접금속은 CSF-71T, CSF-81T를 사용하였다. 피로시험은 응력비 R=0에서 각 재료조건에 대해서 수행하였다. P-S-N 선도는 JSME-S002 규정에 맞춰 파괴확률 10%, 50%, 90%에 대해서 나타냈으며 수명 예측 식을 도출하였다.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.768-776
• /
• 1994

This paper describes computer-aided forging design for rib/web shaped parts. In manufacturing a part by means of forging process, the first step is to design the forging. This is done by modifying the given machined part geometry according to the requirements of the forging process. Traditionally, this is done by experienced forging designers using empirical forging design guidelines. Generally, it would be neither possible nor practical to develop a system which encompasses the design of all types of forgings. Accordingly, forging design can be simplified by considering critical two dimensional cross sections of the machined part geometry. This system is composed of three modules(process variable decision module, forging design module and redesign module) and each module is carried out in regular sequence. In the process variable decision module, first of all, the undercut is checked and modified, and then deep recesses and holes difficult to forge are eliminated. Also parting line, forging plane, forging plan view area, forging weight and maximum size(maximum height or width)are determined. In the forging design module, the magnitude of various allowances, draft angle, minimum web thickness, corner and fillet radius are determined and then geometry modification is performed. Finally, since the design rules and databases used in this system are based on parameters of the forging geometry, such as the trimmed forging plan area, forging weight, forging maxmum size, plausible estimates need to be made for these parameters. Therefore, in the re-design module, the design process is iterated until a satisfactory forging is obtained.

• 한국전산구조공학회논문집
• /
• 제20권5호
• /
• pp.551-556
• /
• 2007

소화시스템에 사용되는 고압의 소화가스 저장용기에는 저장용기의 파손을 막아주는 안전밸브가 있다. 이러한 안전밸브의 내부에는 원형 박판의 파열 판이 들어 있는데, 저장용기의 내압이 위험수준에 도달하면 파열 판이 파손하여 내압을 배출하는 역할을 한다. 안전밸브의 설계인자는 파열 판의 두께, 안전밸브의 유로 직경, 플라스틱 패킹 링의 내부 직경 그리고 파열 판을 고정하는 볼트 안쪽의 필렛 반경이 있다. 이중에서 파열 판의 두께는 0.2mm로 고정을 하였다. 요인배치법을 사용하여 주효과를 결정하였고 회귀방정식을 유도하였다. 이러한 회귀방정식은 추후 안전밸브의 설계에 있어서 기초 설계 자료로서 활용할 수 있도록 실험 결과와 비교하여 검증하였다. 검증실험 및 회귀방정식에 의한 결과의 오차는 약 $2{\sim}5%$ 정도인 것을 확인하였다. 그리고 반응표면법을 사용하여 기밀테스트 압력인 25MPa에서 파열할 수 있는 안전밸브의 최적 모델을 결정하였다.

• Archives of Reconstructive Microsurgery
• /
• 제21권1호
• /
• pp.56-60
• /
• 2012

Purpose: Thumb reconstruction plays most important role in hand injuries because total loss of a thumb constitutes about 40% disability in the hand. The reconstruction can be accomplished by pollicization, free toe-to-thumb transfer, wrap around procedure and lengthening extraction. However, we sometimes need consecutive or double free flaps in the reconstruction of mutilating hand injuries. Methods: We reconstructed a mutilating hand injury in a 54-years old man. Because of severe crushing injury of right thumb and index fingers, we reconstructed a thumb with pollicization using nearly amputated middle finger. Although it survived completely, the adjacent soft tissues which had been covered by fillet flap from the space past was necrosed on 1 month. We debrided the necrotic tissues and covered it with anteromedial thigh perforator free flap consecutively because he had an anatomical variation in branches of lateral femoral circumflex artery. Results: He had an uneventful postoperative course without any complication such as infection, dehiscence and flap necrosis. Three months later, he had undergone tenolysis and defatting procedure of flap site. He recovered the some amount of grip function and was happy with the result. Conclusion: In severe hand trauma including thumb amputation, thumb reconstruction using pollicization and perforator free flap could be an alternative option. It provides minimal donor site morbidity and an acceptable functional result.