• 제목/요약/키워드: filled teeth

검색결과 342건 처리시간 0.025초

일부(一部) 대학생(大學生) 신체발육(身體發育) 및 건강상태(健康狀態)에 관(關)한 조사(調査) (A Study on the Physical Growth and Health Status in University Students)

  • 권이혁;차철환
    • Journal of Preventive Medicine and Public Health
    • /
    • 제1권1호
    • /
    • pp.67-78
    • /
    • 1968
  • For the purpose of ascertaining the status of physical growth and health status of the University students, a intensive survey was conducted by the authors towards a total of 2,638(male; 2,228, female; 410) who passed the written entrance examination at the Seoul National University. The items included the measurements on physical growth, various physical indixes, visual acuity, tuberculosis and dental status. The findings and results can be summarized as follows: 1. Physical Growth No significant difference was found in the physical growth between classes(literature and science) and by ages. In males, the means of body height, body weight, chest-girth and sittingheight were $168.0{\pm}5.07cm,\;55.7{\pm}5.71kg,\;85.8{\pm}4.4cm\;and\;91.5{\pm}2.21cm$, respectively. In females, these were $157.4{\pm}4.57\;cm,\;00.4{\pm}5.75kg,\;80.3{\pm}4.51cm\;and\;86.1{\pm}3.30cm$, respectively. Basing on the above measurements several physical indixes were calculated as follows ; Relative body weight 33.15 in males and 32.02 in females. Relative chest-girth 51.07 and 51.01, relative sitting-height 54.46 and 54.70 $R\ddot{o}hrer$ index 1.00 and 1.02, Kaup index 1.97 and 2.04, Vervaeck index 83.63 and 83.03, and Pelidisi index 89.94 and 92.45. 2. Visual Acuity Among the students of science classes those of 0.8 and below in vision on left and right occupied 46.4% and 45.0%, those of 0.6 and below 39.1% and 41.2%, respectively. Among the students of literature classes those of 0.8 and below occupied 46.3% and 42.9%, and those of 0.6 and below occupied 41.4% and 39.0, respectively. In males those of 0.8 and below occupied 46.8% and 44.5% and 0.6 and below occupied 41.9% and 39.7%, while in females 0.8 and below occupied 43.9%, and 42.4%, and 0.6 and below occupied 38.3% and 37.3%, respectively. In males those of 0.8 and below in corrected vision occupied 12.1% and 10.3%, while in females 12.9% and 12.2%, respectively. More students of abnormal vision were found among science classes and the proportions of corrected vision were 38.9% and 37.4% in males, and 33.9% and 33.2% in females, respectively. 3. Tuberculosis Among the total, 55 students were diagnosed as tuberculosis, of whom 50 were minimal cases, 2 were moderately advanced cases and 3 were far advanced cases. 4. Dental Status Among the total, 81.2% were of decayed teeth, 20.8% filled, 9.5% missed, 5.0% extraction needed, 9.1% sunplatinum bridges, 3.3% golden bridges and 5.5% golden inlay. Regarding tartar on teeth moderate, heavy and light grades occupied 49.5%, 29.7% and 20.3%, respectively and 0.8% had none. 5. Comprehensive evaluation According to criteria 4 grades were applied to comprehensive evaluation as follows : A...excellent in physical status B...with some physical defects but no difficulties in study C...need treatment D...need treatiment and rest Out of the total, A grade occupied 21.6%, B 76.2% and C. and D 2.2.

  • PDF

대전 동구 보육원생의 구강건강 및 구강건강관련 삶의 질 (Oral Health and Quality of Life of the Orphans in Dong-gu, Daejeon)

  • 궁화수;송은주;황수정
    • 치위생과학회지
    • /
    • 제13권3호
    • /
    • pp.223-229
    • /
    • 2013
  • 본 연구는 대전 동구 보육원생 대상 계속구강건강관리사업의 효과를 평가하고자 대전 동구 보육원생 109명을 대상으로 하여 2012년 7~8월에 구강검사와 COHIP를 비롯한 설문조사를 실시하였다. 2010년 국민구강건강실태조사 대전시 표본과 대전 동구에 거주하고 보건소 계속구강건강 관리사업을 받지 않은 아동의 자료를 검정값으로 이용하여 일표본 검정을 하였으며, 연구 결과는 다음과 같다. 1. 계속구강건강관리사업을 받은 보육원 9~12세 아동과 13~18세 청소년은 우식경험영구치수에 있어서 대전시 12세, 15세 표본과 각각 비교하여 차이가 없으나, 13~18세 청소년은 대전시 15세 표본과 비교하여 우식치아수와 우식치면수가 유의하게 많았다(p<0.001). 2. 계속구강건강관리사업을 받은 보육원 9~12세 아동은 보건소 계속구강건강관리사업을 받지 않은 아동과 비교하여 치면세균막지수는 유의하게 적어서(p<0.001), 잇솔질 방법을 올바르게 수행하고 있는 것으로 판단되었다. 3. 계속구강건강관리사업을 받은 보육원 13~18세 청소년은 대전시 15세 표본과 비교하여 유의하게 적은 잇솔질 횟수, 많은 치은출혈삼분악수를 보여(p<0.001), 연령이 증가하면서 자가구강건강관리가 부족한 것으로 판단되었다. 4. 계속구강건강관리사업을 받은 보육원 9~12세 아동은 보건소 계속구강건강관리사업을 받지 않은 아동과 비교하여 아동 구강건강관련 삶의 질(COHIP) 총점과 자기이미지와 학교환경의 항목에서 부정적이었다(p<0.05). 따라서, 보육원생의 구강건강증진을 위해서는 현재 발생되어 있는 우식치면수의 감소가 필요하므로 구강병예방사업과 더불어 구강병치료사업이 추가되어야 한다. 연령이 증가할수록 구강건강이 악화되는 양상을 나타내므로 청소년은 아동과 분리하여 청소년에 맞는 구강보건교육, 보육원내의 구강보건행동에 대한 지속적인 모니터링과 심리적 지지가 필요하다.

Structural Equation Modeling을 통한 노인(老人)의 구강건강(口腔健康) 관련요인(關聯要因) 분석(分析) (Oral Health and Related Factors for the Elderly)

  • 성정희
    • 치위생과학회지
    • /
    • 제4권3호
    • /
    • pp.91-95
    • /
    • 2004
  • 본 연구는 구강보건실태와 관련요인을 분석하고 관련요인의 인자구조모델을 구축하는데 그 목적이 있다. 연구 대상자는 2002년 1월부터 12월까지 국민건강보험공단이 실시한 지역가입자 건강검진(1차)을 받은 65세 이상 노인 9,340명이다. 대상자는 구강검진을 포함한 모든 검진을 받고 문진표를 작성한 노인들이다. 분석의 주요결과는 다음과 같다. 1. 구성개념타당성에 대한 검토체위검사, 요 검사, 혈액검사, 식 습관, 음주 흡연, 치료 예방, 구강증상, 구강건강상태 등 인자구조모델의 구성개념타당성은 적합도 지수 GFI, CFI, TLI, RMSEA를 이용하여 분석한 결과 모두 적합한 범위에 있었으므로 구성개념타당성은 인정되었다. 2. 각 요인과 구강건강상태와의 관련성을 보기 위한 구조방정식 모델을 분석한 결과 요 검사를 제외한 모든 요인이 구강건강상태에 영향을 미치고 있음이 확인되었으며 이를 설명할 종합적인 구조모델을 구축할 수 있었다. 이상의 결과, 치과 방문과 치면세마 경험이 적은 농촌지역이 도시지역에 비해 치아우식증, 치아 결손을, 의치필요자율이 높았으며, 음주 흡연이 치아우식증, 치주질환, 치아결손율에 부정적인 영향을 주고 있음을 확인할 수 있었다. 또한 치주질환은 전체의 3.2%에서 관찰되었으며 낮은 연령에서 많이 확인되었다. 대부분의 구강질환은 올바른 구강건강행동의 실천으로 예방 가능하므로 전국 각 지역 보건소를 중심으로 구강보건전문가에 의해 바른 식 습관과 구강건강관리에 관한 노인구강보건교육이 체계적으로 이루어져야 하며, 경제적, 지리적인 장애로 인해 치과기관을 방문하지 못하거나 치면세마, 의치장착 등의 구강 건강행위를 소홀히 하지 않도록 하기 위한 치과 의료서비스 접근도를 높히는 정책전환이 요구된다. 또한, 구강건강상태와 전신건강과의 관련성을 설명하기 위해 구조모델을 구축하기 위해서는 보다 정확한 검사방법과 효과적인 지표 개발이 선행되어야 한다. 이 연구에서는 국민건강보험공단에서 개발한 항목을 그대로 적용하였기 때문에 모델 구성에 한계점이 있었다. 향후 계속적인 연구가 필요할 것으로 사료된다.

  • PDF

예방적 레진수복의 미세누출에 관한 연구 (A STUDY ON MICROLEAKAGE OF PREVENTIVE RESIN RESTORATION)

  • 구현정;이상훈;한세현
    • 대한소아치과학회지
    • /
    • 제28권3호
    • /
    • pp.504-511
    • /
    • 2001
  • 예방적 레진수복은 교합면 열구전색의 개념을 확대하여 초기우식에만 국한한 와동을 형성하여 복합레진으로 충전한 후 나머지 건전한 부위의 소와열구를 치면열구전색재로 도포하는 것이다. 충전제가 첨가된 치면열구전색재로서 작은 와동의 수복도 가능하다는 새로운 방법은 소아환자의 치료시 술자와 환자 모두에게 도움을 줄 수 있을 것이다. 그러나 예방적 레진수복을 시행하여 비교한 연구가 아직까지는 부족한 실정이다. 이에 저자들은 4가지 방법의 예방적 레진수복시의 미세누출을 비교해보고자 하였으며 레진수복만을 한 경우도 함께 비교하여 보았다. 55개의 상, 하악 소구치를 준비하여 I급와동을 교합면에 형성하고 다음과 같이 수복하였다. 제1군 : 와동을 복합레진(Z-100)으로 수복 제2군 : 와동을 복합레진(Z-100)으로 수복 중합후, 비충전 전색재인 Teethmate F-1으로 소와열구도포 제3군 : 와동을 복합레진(Z-100)으로 수복 중합후, 충전 전색재인 Ultraseal XT-plus로 소와열구도포 제4군 : 와동과 소와열구를 한 번에 Ultraseal XT-plus로 수복 제5군 : 와동과 소와열구를 나누어 Ultraseal XT-plus로 수복 위와 같이 처리한 치아를 $5^{\circ}C$$55^{\circ}C$의 수조에 번갈아 30초씩 500회의 열순환을 실시하고 1% methylene blue용액에 24시간 담근 후 수세하고 투명레진에 매몰하였다. 매몰된 치아를 협설측으로 치아장축방향으로 평행하게 절단한 후 입체현미경으로 염색용액의 침투정도를 관찰하여 다음의 결과를 얻었다. 1. 평균 미세누출은 4군에서 가장 높았고, 3군에서 가장 낮았다. 평균 미세누출은 4>1>5>2>3군의 순으로 감소하였다. 2. 군간의 미세누출 비교에서 1군은 5군과는 통계학적으로 유의한 차이가 없었으나 2군, 3군보다 유의하게 높은 미세누출을 보였고(p<0.05), 4군보다는 유의하게 낮은 미세누출을 보였다(p<0.05). 3. 2군은 3군과는 통계학적으로 유의한 차이가 없었으나 4군, 5군보다는 유의하게 낮은 미세누출을 보였다(p<0.05). 4. 3군은 4, 5군보다 통계학적으로 유의하게 낮은 미세누출을 보였다(p<0.05). 5. 5군은 4군보다 통계학적으로 유의하게 낮은 미세누출을 보였다(p<0.05).

  • PDF

복합레진 수복 시 재접착 술식이 미세누출에 미치는 영향 (INFLUENCE OF REBONDING PROCEDURES ON MICROLEAKAGE OF COMPOSITE RESIN RESTORATIONS)

  • 이미애;서덕규;손호현;조병훈
    • Restorative Dentistry and Endodontics
    • /
    • 제35권3호
    • /
    • pp.164-172
    • /
    • 2010
  • 복합레진 수복시, 일반적으로 연마, 산부식, 수세 및 건조 단계를 거쳐 저점도 레진을 적용하는 재접착 술식을 통해 예상되는 수축간극을 봉쇄한다. 그러나, 이 과정은 재접착제 적용 이전에 물이나 잔사가 간극을 매워버릴 수 있어 그 효과가 의심된다. 본 실험에서는 연마 단계 이전, 즉 복합레진을 중합한 직후에 재접착제를 도포한다면 변연누출을 더 줄일 수 있을 것이라는 가설을 검증하고자 하였다. 실험을 위해 35개의 발거한 대구치에서 협면과 설면에 교합면 변연은 법랑질에, 치은측 변연은 상아질에 위치하는 5급 와동을 형성하였다. 와동은 Z250 (3M ESPE, USA)로 충전하였고, 접착제로는 $Adper^{TM}$ Single Bond 2 (3M ESPE)을 사용하였다. 재접착제로는 Biscover LV (Bisco, USA) 레진 전색제와 ScotchBond Multi-purpose system (3M ESPE)의 접착제, 및 점도가 낮은 실험용 접착제를 연마 전 또는 일련의 연마 및 산부식 후 수복물의 변연에 적용하였다. 2% 메틸렌 블루 용액에 네 시간 동안 침적한 뒤 교합측 및 치은측 변연에서의 색소 침투 깊이를 광학 입체 현미경으로 측정하였다. 재접착제의 점도와 변연미세누출의 상관관계도 평가하였다. 재접착 술식, 재접착제, 및 변연의 위치, 그 각각에서는 통계적으로 유의한 차이를 관찰할 수 없었다. 그러나, 재접착 술식을 시행하지 않은 대조군의 경우에는 세 가지 재접착제를 사용한 재접착군에 비해 치은측 변연에서 미세누출이 통계적으로 유의하게 크게 나타났다(p < 0.05). 대조군과 재접착군의 미세누출의 차이는 교합측 변연에서는 관찰되지 않았다. 연마 및 산부식 후 치은변연에 재접착제를 적용한 경우에서 약한 음의 상관관계(r = -0.326, p = 0.041)를 보인 경우를 제외하고는, 재접착제의 점도와 미세누출은 유의한 상관관계를 보이지 않았다.

광중합형 복합레진과 shade guide의 색차에 관한 연구 (A Spectrophotometric Study on Color Differences between Various Light-Cured Composite Resins and Shade Guides)

  • 임경민;이민호;송광엽
    • 구강회복응용과학지
    • /
    • 제25권1호
    • /
    • pp.13-22
    • /
    • 2009
  • 심미적인 특성을 가진 복합레진은 전치부 수복용 재료로 많이 이용되고 있다. 복합레진 수복 시 만족스러운 결과를 얻기 위해서는 색조의 선택이 중요한 역할을 한다. 현재 대부분의 수복용 복합레진은 Vita Lumin 색조견본(shade guide)이나 각각의 회사에서 제공하는 색조견본을 사용하고 있으나, 색조 견본 사이의 색차와 수복물과 견본 사이에 색차가 예상되어 그 차이를 규명하여 임상적인 선택 시에 도움이 되고자 하였다. 4종의 광중합 복합레진(Gradia Direct (GD), Z250 (Z250), Clearfil AP-X (AP-X), $Esthet{\cdot}X$ ($E{\cdot}X$))과 A2와 A3의 색조 견본을 사용하였다. 각 재료마다 3개의 시편과 1개의 색조 견본을 제작하였다. Teflon 주형(깊이 1.35 mm, 직경 8 mm)에 각각의 복합레진을 채우고 응축한 후에 중합하여 젖은 사포로 연마하였다. 색조 견본을 연마용 stone과 고무를 이용하여 1.35 mm 두께로 연마하였다. 컴퓨터에 의해 조절되는 spectrophotometer(color i5, GretagMacbeth, USA)를 이용하여 시편과 색조견본의 색의 특성을 CIELAB coordinates ($L^*$, $a^*$, $b^*$)로 평가하였다. CIELAB 계측을 통하여 복합레진과 색조 견본의 색차(${\Delta}E^*ab$)를 비교 평가 하였다. 광원으로는 CIE standard D65를 사용하였다. 다음과 같은 결과를 얻었다. 1. 동일한 shade로 설계된 여러 제조회사의 복합레진 시편의 $L^*$, $a^*$, $b^*$ 값 간에 유의할 만한 수준의 차이를 나타냈다(p<0.05). 2. 동일한 shade로 설계된 여러 제조회사의 복합레진 시편 간에 대부분 육안으로 인지할 만한 색차(${\Delta}E^*ab>3.3$)값을 나타냈다. 3. 동일한 shade로 설계된 여러 제조회사의 복합레진과 제조회사에서 제공되는 shade guide 및 Vita Lumin shade guide 간에 대부분 육안으로 인지할 만한 색차(${\Delta}E^*ab>3.3$)값을 나타냈다. 4. 임상에서 보다 나은 색 조화를 얻어 심미성을 향상시키기 위해서는 실제 수복물로 제작한 custom shade guide의 제작이 필요할 것으로 생각된다. 제조사에 의해 제공되는 색조 견본이나 Vita Lumin 색조 견본은 임상의에게 복합레진의 색조 선택 시에 정확한 기준을 제공하지는 않았고, 대부분의 제품에서 인지할 수 있는 색차가 있었다. 그러므로 보다 나은 색조 선택을 위해 수복용 레진으로 제작한 맞춤형 색조 견본을 사용하는 것을 추천한다.

접착제 도포후 오염된 표면의 처리방법에 따른 복합레진의 전단결합강도와 미세누출 (SHEAR BOND STRENGTH AND MICROLEAKAGE OF COMPOSITE RESIN ACCORDING TO TREATMENT METHODS OF CONTAMINATED SURFACE AFTER APPLYING A BONDING AGENT)

  • 박주식;이석종;문주훈;조영곤
    • Restorative Dentistry and Endodontics
    • /
    • 제24권4호
    • /
    • pp.647-656
    • /
    • 1999
  • The purpose of this study was to investigate the shear bond strength and marginal microleakage of composite to enamel and dentin according to different treatment methods when the applied bonding agent was contaminated by artificial saliva. For the shear bond strength test, the buccal and occlusal surfaces of one hundred twenty molar teeth were ground to expose enamel(n=60) and dentin surfaces(n=60). The specimens were randomly assigned into control and 5 experimental groups with 10 samples in each group. In control group, a bonding system(Scotchbond$^{TM}$ Multi-Purpose plus) and a composite resin(Z-100$^{TM}$) was bonded on the specimens according to manufacture's directions. Experimental groups were subdivided into 5 groups. After polymerization of an adhesive, they were contaminated with at artificial saliva on enamel and dentin surfaces: Experimental group 1 ; artificial saliva was dried with compressed air. Experimental group 2 ; artificial saliva was rinsed with air-water spray and dried. Experimental group 3 ; artificial saliva was rinsed, dried and applied an adhesive. Experimental group 4 ; artificial saliva was rinsed, dried, and then etched using phosphoric acid followed by an adhesive. Experimental group 5, artificial saliva was rinsed, dried, and then etched with phosphoric acid followed by consecutive application of both a primer and an adhesive. Composite resin(Z-100$^{TM}$) was bonded on saliva-treated enamel and dentin surfaces. The shear bond strengths were measured by universal testing machine(AGS-1000 4D, Shimaduzu Co. Japan) with a crosshead speed of 5mm/minute under 50kg load cell. Failure modes of fracture sites were examined under stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's test. For the marginal microleakage test, Class V cavities were prepared on the buccal surfaces of sixty molars. The specimens were divided into control and experimental groups. Cavities in experimental group were contaminated with artificial saliva and those surfaces in each experimental groups received the same treatments as for the shear test. Cavities were filled with Z-100. Specimens were immersed in 0.5% basic fuchsin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from the one specimen. Marginal microleakages of enamel and dentin were scored under streomicroscope and averaged from four sections. The data were analyzed by Kruskal-Wallis test and Fisher's LSD. The results of this study were as follows. 1. The shear bond strength to enamel showed lower value in experimental group 1(13.20${\pm}$2.94MPa) and experimental group 2(13.20${\pm}$2.94MPa) than in control(20.03${\pm}$4.47MPa), experimental group 4(20.96${\pm}$4.25MPa) and experimental group 5(21.25${\pm}$4.48MPa) (p<0.05). 2. The shear bond strength to dentin showed lower value in experimental group 1(9.35${\pm}$4.11MPa) and experimental group 2(9.83${\pm}$4.11MPa) than in control group(17.86${\pm}$4.03MPa), experimental group 4(15.04${\pm}$3.22MPa) and experimental group 5(14.33${\pm}$3.00MPa) (p<0.05). 3. Both on enamel and dentin surfaces, experimental group 1 and 2 showed many adhesive failures, but control and experimental group 3, 4 and 5 showed mixed and cohesive failures. 4. Enamel marginal microleakage was the highest in experimental group 1 and there was a significant difference in comparison with other groups (p<0.05). 5. Dentin marginal microleakages of experimental group 1 and 2 were higher than those of other groups (p<0.05). This result suggests that treatment methods, re-etching with 35% phosphoric acid followed by re-application of adhesive or repeating all adhesive procedures, will produce good effect on both shear bond strength and microleakage of composite to enamel and dentin if the polymerized bonding agent was contaminated by saliva.

  • PDF

수 종의 복합레진 접착 시스템에서의 미세 누출의 비교 (COMPARISON OF MICROLEAKAGE WITH THREE DIFFERENT ADHESIVE SYSTEMS)

  • 석충기;남동우;남순현;김영진;김현정
    • 대한소아치과학회지
    • /
    • 제31권4호
    • /
    • pp.636-644
    • /
    • 2004
  • 최근 자가 부식형 접착 시스템이 개발되어 법랑질 및 상아질에 모두 적용할 수 있고, 임상적 술식을 단순화 시켰다. 이 접착 시스템은 적용하기 용이하고 임상적으로도 법랑질 및 상아질에 높은 결합강도를 보인다고 보고되고 있다. 이 연구는 in vitro 상에서 복합레진 5급 와동의 법랑질 및 상아질 경계에서 전부식 처리를 동반한 one-bottle 접착시스템과 자가 부식형 접착 시스템을 사용하였을 때 미세 누출을 비교하기 위해 시행하였다. 교정적 목적으로 발치된 30개의 소구치를 무작위적으로 3개 군으로 나누었다; 1 군 (Single $Bond^{(R)}$ + Filtek $Z250^{(R)}$), 2 군 (Clearfil SE $Bond^{(R)}$ + Filtek $Z250^{(R)}$), 3 군 (Adper Prompt $L-Pop^{(R)}$ + Filtek $Z250^{(R)}$). 표준화된 5급 와동을 각 소구치 협면, 설면에서 백악-법랑경계에 평행하게 형성하였으며, 와동의 치은측 1/2은 백악법랑경계보다 1mm 치근단으로 연장하였다. 접착 시스템을 제조자의 지시대로 적용한 다음 복합레진을 충전하고 제조자의 지시대로 광중합하였다. 시편을 $37^{\circ}C$ 증류수에 5일 간 보관 후 $5^{\circ}C{\pm}2^{\circ}C$$55^{\circ}C{\pm}2^{\circ}$에서 1000회 열순환한 다음, 2% methylene blue 용액에 12시간 침잠시켰다. $Isomet^{TM}$ (Buehler Co., Lake Bluff, IL, USA)을 사용하여 치아를 충전물 중앙에서 종절단한 후 입체 현미 경하에서 25배의 배율로 색소 침투도를 평가하였다. 결과는 t-test 와 one-way ANOVA를 이용하여 통계처리 하였다. 결과는 다음과 같았다. ${\cdot}$ 실험에 사용 된 접착 시스템 중에 미세 누출을 완벽하게 방지하는 접착 시스템은 없었다. ${\cdot}$ 상아질 경계에서의 미세 누출이 법랑질 경계에서보다 통계학적으로 유의하게 더 많았다(p<0.0001). ${\cdot}$ 법랑질 경계에서 자가 부식형 접착 시스템은 전부식 처리를 동반한 one-bottle접착 시스템과 통계학적으로 유의한 차이를 보이지 않았다. ${\cdot}$ 상아질 경계에서, 자가 부식형 접착 시스템은 전부식 처리를 동반한 one-bottle 접착 시스템과 통계학적으로 유의한 차이를 보이지 않았다.

  • PDF

접착제와 와동형성의 차이에 따른 5급 복합레진 수복의 전향적 임상연구 (PROSPECTIVE CLINICAL EVALUATION OF THREE DIFFERENT BONDING SYSTEMS IN CLASS V RESIN RESTORATIONS WITH OR WITHOUT MECHANICAL RETENTION)

  • 이경욱;정세준;한영철;손호현;엄정문;오명환;조병훈
    • Restorative Dentistry and Endodontics
    • /
    • 제31권4호
    • /
    • pp.300-311
    • /
    • 2006
  • 본 연구의 목적은 복합레진을 이용한 비우식성 치경부 5급 병소 수복에 있어서, 3가지 다른 접착제를, 유지구를 부여한 치아와 부여하지 않은 치아에 적용하였을 때의 임상적인 효능의 차이를 비교하기 위함이다. 총 150개의 치아를 각각 25개씩 6개의 군으로 나누었다. A군 : Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4세대 접착제)를 사용하고 유지구를 부여하지 않음. B군 : SBMP 를 사용하고 유지구를 부여. C군 : BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5 세대 접착제)를 사용하고 유지구를 부여하지 않음. D군 : BC Plus를 사용하고 유지구를 부여. E군 : Adper Prompt (3M ESPE, Seefeld, Germany, 6 세대 접착제)를 사용하고 유지구를 부여하지 않음. F군 : Adper Prompt를 사용하고 유지구를 부여. 모든 치아는 복합레진인 Denfil (Vericom Co., Anyang, Gyeonggido, Korea) 을 이용하여 충전하였다. 수복 직후와 수복 6 개월 후에 modified USPHS (United States Public Health Service) criteria에 따라 수복물을 임상적으로 평가하였다. 추가적으로 임상사진을 촬영하였으며, 에폭시 레진을 이용하여 복제한 후 주사전자현미경을 이용하여 이를 관찰하였다. 6개월 후 관찰 결과, alpha rating의 수가 각 실험군마다 동일하지는 않았지만, 통계적으로는 3가지의 접착제간에 유의할만한 차이는 없었고, 기계적인 유지구를 부여한 군과 부여하지 않은 군 간에도 유의할만한 차이는 없었다 (p < 0.05). 그러나 6개월의 관찰 기간은 일반적으로 기대되는 레진의 수명보다 짧기 때문에, 각 실험군 간의 차이를 알아보기 위해서는 추후 더 오랜 기간의 관찰이 요구 된다.

접착강화제 도포후 인공타액에 오염된 표면의 처리방법에 따른 복합레진의 번연누출과 전단결합강도 (MARGINAL MICROLEAKAGE AND SHEAR BOND STRENGTH OF COMPOSITE RESIN ACCORDING TO TREATMENT METHODS OF ARTIFICIAL SALIVA-CONTAMINATED SURFACE AFTER PRIMING)

  • 조영곤;고기종;이석종
    • Restorative Dentistry and Endodontics
    • /
    • 제25권1호
    • /
    • pp.46-55
    • /
    • 2000
  • During bonding procedure of composite resin, the prepared cavity can be contaminated by saliva. In this study, marginal microleakage and shear bond strength of a composite resin to primed enamel and dentin treated with artificial saliva(Taliva$^{(R)}$) were evaluated. For the marginal microleakage test, Class V cavities were prepared in the buccal surfaces of fifty molars. The samples were randomly assigned into 5 groups with 10 samples in each group. Control group was applied with a bonding system (Scotchbond$^{TM}$ Multi-Purpose plus) according to manufacture's directions without saliva contamination. Experimental groups were divided into 4 groups and contaminated with artificial saliva for 30 seconds after priming: Experimental 1 group ; artificial saliva was dried with compressed air only, Experimental 2 group ; artificial saliva was rinsed and dried. Experimental 3 group ; cavities were etched with 35% phosphoric acid for 15 seconds after rinsing and drying artificial saliva. Experimental 4 group ; cavities were etched with 35% phosphoric acid for 15 seconds and primer was reapplied after rinsing and drying artificial saliva. All the cavities were applied a bonding agent and filled with a composite resin (Z-100$^{TM}$). Specimens were immersed in 0.5% basic fuschin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from one specimen. Degree of marginal leakage was scored under stereomicroscope and their scores were averaged from four sections. The data were analyzed by Kruscal-Wallis test and Fisher's LSD. For the shear bond strength test, the buccal or occlusal surfaces of one hundred molar teeth were ground to expose enamel(n=50) or dentin(n=50) using diamond wheel saw and its surface was smoothed with Lapping and Polishing Machine(South Bay Technology Co., U.S.A.). Samples were divided into 5 groups. Treatment of saliva-contaminated enamel and dentin surfaces was same as the marginal microleakage test and composite resin was bonded via a gelatin capsule. All specimens were stored in distilled water for 48 hours. The shear bond strengths were measured by universal testing machine (AGS-1000 4D, Shimaduzu Co., Japan) with a crosshead speed of 5 mm/minute. Failure mode of fracture sites was examined under stereomicroscope. The data were analyzed by ANOVA and Tukey's studentized range test. The results of this study were as follows : 1. Enamel marginal microleakage showed no significant difference among groups. 2. Dentinal marginal microleakages of control, experimental 2 and 4 groups were lower than those of experimental 1 and 3 groups (p<0.05). 3. The shear bond strength to enamel was the highest value in control group (20.03${\pm}$4.47MPa) and the lowest value in experimental 1 group (13.28${\pm}$6.52MPa). There were significant differences between experimental 1 group and other groups (p<0.05). 4. The shear bond strength to dentin was higher in control group (17.87${\pm}$4.02MPa) and experimental 4 group (16.38${\pm}$3.23MPa) than in other groups, its value was low in experimental 1 group (3.95${\pm}$2.51 MPa) and experimental 2 group (6.72${\pm}$2.26MPa)(p<0.05). 5. Failure mode of fractured site on the enamel showed mostly adhesive failures in experimental 1 and 3 groups. 6. Failure mode of fractured site on the dentin did not show adhesive failures in control group, but showed mostly adhesive failure in experimental groups. As a summary of above results, if the primed tooth surface was contaminated with artificial saliva, primer should be reapplied after re-etching it.

  • PDF