• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.224-227
• /
• 2004

A computer program for composite pressure vtlssel design is developed. In-puts are : material-property(young's modulus, shear modulus, tensile strength, poisson's ratio, density), operating pressure, burst pressure, liner thickness, boss diameter, boss weight and number of helical angles. Out-puts are; thickness of each layer, weight of the vessel, dimension of the vessel, inner volume, dome-shape and helical winding angle. Also filament winding angles can be selected various kinds of utilizing virtual boss diameter.

• Applied Microscopy
• /
• 제33권3호
• /
• pp.223-231
• /
• 2003

광학현미경과 투과전자현미경을 이용하여 꼬막, Tegillarca granosa 아가미의 미세구조를 기재하였다. 꼬막의 아가미는 전형적인 사새형 아가미 구조를 가진다. 새엽은 다수의 측면섬모대와 정단섬모대를 가지며, 혈림프동을 둘러싸고 있는 새엽 상피층은 단층으로 상피세포, 섬모세포 그리고 분비세포들로 이루어져 있다. 상피세포들은 대부분 미세융모를 가진 편평형이다. 섬모세포는 원주형으로 두 종류(A와 B)로 구분되는데, A형 섬모세포는 B형 섬모세포에 비해 분포 비율이 높으며, 세포질의 전체적인 전자밀도는 낮다. 횡단면 표본에서 섬모 축사는 전형적인 "9+2" 구조를 나타냈으며, 기저 중심립은 "$2{\times}9$"의 구조를 보였다. 분비세포들은 새엽의 정단부에서 주로 관찰되며, 분비과립의 특징에 따라 세 종류 (A, B, C)로 구분할 수 있다. A형 분비세포는 다른 분비세포들에 비해 분포정도가 높고, 전자밀도가 낮은 분비과립을 함유한다. B형 분비세포는 막으로 싸여진 전자밀도가 높은 분비과립을 가지며, C형 분비세포들의 분비과립은 타원형으로 중심부의 균질한 물질을 과립상의 물질들이 싸고 있는 형태이다.

• 한국수산과학회지
• /
• 제55권3호
• /
• pp.338-344
• /
• 2022

This study evaluated the external form of Rhodeus notatus TSV (transparent-scaled variant) type identified in Korea for the first time and compared it with that of the normal type. The TSV units newly found on Rhodeus notatus are iii10 of dorsal fin and anal fin iii10, which are similar to that in the normal type, considering the observing coefficient of each part's fins. The external form is, transparent enough to see the red gill filament in the operculum, the spiral digestive organ is observed opaquely, and numerous melanophores are stained at the upper part of abdomen. The coloration and scales are different between TSV type and normal type; however, there is no difference in the external form and meristic character.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.435-435
• /
• 2012

ITER를 비롯한 실증로나 상용로급 토카막에서는 중성빔 가열이나 전류구동을 위해 1MeV이상의 빔 에너지가 요구된다. 빔 출력이 가속전압의 5/2승에 비례함에도 불구하고 양이온 빔의 경우 에너지가 높아지면 빔의 중성화 효율이 급격히 감소하여 ITER NBI의 경우 양이온 빔의 중성화 효율은 0%에 가깝다. 한편 음이온 빔은 1MeV 이상의 에너지영역에서도 빔 에너지와 거의 무관하게 60% 정도의 중성화 효율을 갖는다. 따라서 ITER는 음이온 빔을 바탕으로 한 중성빔 가열장치(N-NBI)를 채택하고 있다. 우리나라의 핵융합연구가 핵융합 발전을 지향하는한 N-NBI에 대한 연구를 시작해야 하며 그 출발점으로 음이온원 개념설계를 시작하였다. 개념설계는 음이온원 개발과정을 통해 1) 음이온 생성원리 규명, 2) 음 이온원 핵심기술 확보, 3) 음이온 및 음이온 빔 관련 진단 등을 연구할 수 있는 축소규모의 proto-type 음이온원 개발을 목표로 하였다. 음이온원 개발은, 초기에는 KAERI NB test stand 및 KAERI 이온원의 플라즈마 버켓을 활용하기 위해 filament-arc type으로 시작하지만 어느정도 기반이 확립되면 플라즈마 버켓의 electron dump를 제거하고 그 자리에 RF driver를 장착하여 궁극적으로 RF 음이온원을 개발할 계획이다. 본 학회에 발표하는 포스터는 filament-arc type 음이온원에 대한 개념설계이다. 설계된 음이온원은 Tent-type 자장필터를 장착하며, 0.5A의 수소 음이온빔 인출을 목표로 하고 있다. 이를 위해 플라즈마 버켓, 세슘 공급시스템, bias plate, 플라즈마 그리드, electron deflection 자석이 설치된 인출 그리드, 접지 그리드 등에 대한 개념설계가 이루어 졌다. 이 외에도 음이온원 전원과 진단 시스템에 대해서도 논의하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1296-1301
• /
• 2006

The Object of this paper which study for natural frequency of Offshore Wind Turbine Tower with Composite Material and Steel. The Composit Material Tower consist of shell type and stiffened shell type which is made by the method of Filament Winding. And the component of Composite material is used by the Roving RS220PE-535. The Steel Material Tower consist of shell type and stiffened shell type which is made of Mild steel. The Type of Stiffener is hats. This paper compare the Composit Material Offshore Wind Turbine Tower with the Steel Material Offshore wind Turbine Tower and study for Natural Frequency and Mode Shapes.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.661-666
• /
• 2009

The purpose of this study is to analyze the dyeability of polyester(PET) fabric by thermal bonding with low melting component of bicomponent fiber and to describe the change of physical properties of thermal bonded PET fabrics. The PET fabrics were prepared with regular PET fiber as warp and bicomponent fiber as weft. The bicomponent fiber of sheath-core type was composed with a regular PET core and low melting PET sheath. The thermal bonding of PET fabric was carried out in pin tenter($195^{\circ}C$) for 60 seconds. In this study, we investigated the dye ability and fastness of the dyed PET fabric. Dye ability of E-type dyestuff is higher than S-type dyestuff. In the case of E- type dyestuff, the saturated dyeing time was 10minutes at $130^{\circ}C$. The washing fastness and light fastness were excellent as 4-5grade.

• 신재생에너지
• /
• 제4권3호
• /
• pp.51-57
• /
• 2008

The objective of this study is to develop and validate a compressed hydrogen storage system for fuel cell vehicles. The type3 composite cylinder consists of full wrapped composites on a seamless aluminum liner. The key technologies, including design, analysis, and optimized fabrication process for 350bar composite cylinder, were established and verified, and the facilities for fabrication and validation testing have been constructed. Prototype cylinders were fabricated and validated through burst test and ambient cycling test in accordance with international standard.

• 환경생물
• /
• 제40권3호
• /
• pp.301-306
• /
• 2022

The vegetative and reproductive morphology of some parasitic Janczewskia Solms-Laubach species including the type species was examined based on specimens collected from various localities around the world. In J. gardneri Setchell et Guernsey on Osmundea spectabilis (Postels et Ruprecht) Nam from California, secondary pit connections are not found between epidermal cells and vegetative axial cells have two pericentral cells. As its host, J. gardneri also has a typical filament type male structure in an apical urn-shaped pit of branches rather than the trichoblast type in other species including the type J. verruciformis Solms-Laubach and tetrasporangial origin of epidermal cells rather than pericentral cells. These significant differences between the species suggest that J. gardneri should be separated from the genus Janczewskia. Based on this morphological data, the section Heterojanczewskia Setchell including J. gardneri, together with an emendation of the generic delineation of Janczewskia, is elevated to the genus level. Relevant nomenclatural changes for some Janczewskia species are also included here.

• 한국잠사곤충학회지
• /
• 제17권1호
• /
• pp.1-26
• /
• 1975

These studies were attempted to find out the optimum silk reeling system by use of automatic silk reeling machine to increase raw silk yield and reeling efficiency with various silk reelable cocoons. The obtained results are as follows; 1. The mean silk reelability ratio(X)of the Korean cocoons during the last ten years was 61 per cent, beside 64.7 per cent in autumn cocoon and 57.3 per cent in spring cocoon. However, the ratio variation of autumn cocoons was larger than that of spring cocoons. 2. A positive correlation between cocoon filament breaks during its process and silk reelability levels was shown to be significant. The cocoons of both poor and good reelability evidenced "J" shape distribution on the filament break graph by the order of reeling cocoon end. Many bave breaks were found at the inner shell of the cocoons, or in case of poor reelability cocoons. 3. The morphology of broken cocoon ends during the process was classified into A, B, C, D, E and F types, The occurrence of B type was majority, but that of F type was minority among them. 4. In case of the cocoon cooking, H-type ion-exchanged soft water was better for good reelability cocoons, Na and H-type ion exchanged neutral soft water for those of fair reelability, and alkaline (Na-type) soft water for those of poor reelability, respectively. 5. The modification of cooking water by mixing the above different types of water (50％ Na-type and 50％ H-type passed by standard natural water; 75％ Na-type and 25％ H-type passed by hard natural water; 25％ Na-type and 75％ H-type passed by soluble natural water) made higher yield of raw silk with tess breaks of thread. 6, In case cocoon ends groping water included sodium hexametaphosphate as much as 800 ppm. the groping efficiency and raw silk yield of cocoon was improved. The effect was pronounced in case of poor reelability cordons. 7. The most reasonable cocoon cooking and silk reeling condition for automatic silk reeling process were observed to be rather incomplete cook with good reelability cocoons and optimum cook with poor reelability cocoons succeeded by the reeling bath temperature of 45$^{\circ}C$, 8. The reasonable silk reeling velocities were observed to be about 150m per min. for good reelability cocoons, 120m per min. for fair reelability ones and 90 to 120m per min. for poor reelability ones. 9. In order to improve the raw silk yield of cocoons and reeling efficiency, the cocoon stand-by-ratio for reeling should be kept at the level of 40 per cent for good reelability cocoons or at 60 per cent for poor reelability ones beside necessary end found cocoon condition.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.302-308
• /
• 2021

Air filters are being used in countless places from industrial sites to everyday life. The spread of the COVID-19 virus, which started in 2019, is disrupting people's daily lives, and the importance of air filters as a basic means to prevent the spread of these diseases is further highlighted. In this study, the purpose was to develop another type of air filter media with excellent barrier properties that can replace PP meltblown nonwoven fabrics widely used commercially due to its excellent electrostatic properties, differential pressure and filtration efficiency. Therefore, wet-laid nonwoven for air filters were manufactured using plexi-filaments formed through flash spinning and having various fiber diameter from hundreds of nanometers to tens of micrometers, and its applicability as an air-filter media was investigated compared to the meltblown nonwoven. As a result of the performance evaluation, it was found that the filtration efficiency and barrier performance at 0.3㎛ was superior to that of the meltblown nonwoven of the same weight, although the differential pressure was high due to morphological properties of the plexi-filament.