• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.31-39
• /
• 2011

In this study, supervision resides fire mission against problems associated with case studies and surveys done through the side of the field work, technical personnel, fire management, including fire code aspects classified into three kinds of items dealt with the issue. Started at the scene of the problem in terms of performance, the issue of the construction process, mainly dealt with the issue at the time of completion. Fire management side, supervisor of technical personnel, human resources management issues, contract issues, fire code level, the frequent revisions of fire regulations, supervision, processing delays of the resulting report, the problem resides with the expansion of Fire Supervision target was mentioned. Finally, the target for each hierarchical supervision, and resident supervisor of the need for supervision of work performance test was carried out by the correlation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.227-236
• /
• 1997

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and has become a very serious issue in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult because the poorness of basic data and insufficiency of the existing research. Especially, in order to establishment of sound insulation plan about pilings work noise that has highly sound pressure level and impactive, a real situation of sound characteristics about pilings work noise in foundation work demands close investigation. In this point, this study attempts to surveys the characteristics of attenuation and propagation of construction equipment noise in pilings work using SIP(soilcement injected precast pile) method. And this study intends to get the basic data for establishment of a standard about construction noise.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.36.1-36.1
• /
• 2018

Star formation activity of galaxies, along with color and morphology, show significant environmental dependence in local universe, where galaxies in dense environment tend to be more quiescent and redder. However, many studies show that such environmental dependence does not continue at higher redshifts beyond z~1. The question of how the environmental dependence of galactic properties have developed over time is crucial to understanding cosmic galactic evolution. By combining data from Canada-France-Hawaii Telescope Legacy Survey(CFHTLS), Infrared Medium-Deep Survey(IMS), and other surveys, the photometric redshifts of galaxies in CFHTLS W2 field were estimated by fitting spectral energy distribution. The distribution of galaxies was mapped in redshift bins of 0.05 interval from 0.6 to 1.4. For each redshift bin, the number density was mapped. The galaxies in high density regions were grouped into clusters using friend-of-friend method. The color of galaxies were analyzed to study the correlation with redshift as well as environmental difference between field galaxies and cluster member galaxies.

• The Journal of Korea Robotics Society
• /
• v.13 no.3
• /
• pp.190-197
• /
• 2018

Geomagnetic field signals have potential for use in underwater navigation and geophysical surveys. To map underwater geomagnetic fields, we propose a method that exploits an autonomous surface vehicle. In our system, a magnetometer is rigidly attached to the vehicle and not towed by a cable, minimizing the system's size and complexity but requiring a dedicated calibration procedure due to magnetic distortion caused by the vehicle. Conventional 2D methods can be employed for the calibration by assuming the horizontal movement of the magnetometer, whereas the proposed 3D approach can correct for horizontal misalignment of the sensor. Our method does not require a supporting crane system to rotate the vehicle, and calibrates and maps simultaneously by exploiting data obtained from field operation. The proposed method has been verified experimentally in inland waters, generating a magnetic field map of the test area that is of much higher resolution than the public magnetic field data.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.287-301
• /
• 2022

The present study aims to investigate the difference of soundscape evaluation results from on-site field test and laboratory test which are commonly used for soundscape surveys. In order to do this, both field and lab tests were carried out at four different areas in Cheongju city. On-site questionnaire surveys were undertaken to 65 people at 13 points. Laboratory listening tests were carried out to 48 adults using recorded sounds and video. Laboratory tests were undertaken to two different groups who had experience of field survey or not. Also, two different sound reproduction tools, headphones and speakers, were used in laboratory tests. As a result, it was found that there is a very close correlation between sound loudness and annoyance in both field and laboratory tests. However, it was concluded that there must be a difference in recognizing the figure sounds between field and laboratory tests since it is hard to apprehend on-site situation only using visual and aural information provided in laboratory tests. In laboratory tests, it was shown that there is a some difference in perceived most loud figure sounds in two groups using headphones and speakers. Also, it was analyzed that there is a tendency that field experienced people recognize the figure sounds using their experienced memory while non-experienced people can not perceive the figure sounds.

• Wind and Structures
• /
• v.20 no.3
• /
• pp.389-404
• /
• 2015

In this study, residential building damage states observed from a post-tornado damage survey in Joplin after a 2011 EF 5 tornado were used to reconstruct the near-surface wind field. It was based on well-studied relationships between Degrees of Damage (DOD) of building and wind speeds in the Enhanced Fujita (EF) scale. A total of 4,166 one- or two-family residences (FR12) located in the study area were selected and their DODs were recorded. Then, the wind speeds were estimated with the EF scale. The peak wind speed profile estimated from damage of buildings was used to fit a translating analytical vortex model. Agreement between simulated peak wind speeds and observed damages confirms the feasibility of using post-tornado damage surveys for reconstructing the near-surface wind field. In addition to peak wind speeds, the model can create the time history of wind speed and direction at any given point, offering opportunity to better understand tornado parameters and wind field structures. Future work could extend the method to tornadoes of different characteristics and therefore improve model's generalizability.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.510-513
• /
• 2018

Recently, EMC (electromagnetic compatibility) becomes very important, which demands the measurement of EMI (electromagnetic interference) in the chip level. NFS (near-field scanning) systems defined in IEC 61967 and IEC 62508 are typical methods to analyze EMI in the chip level. As chips becomes faster, frequency measurement of NFS system should become wideband, but it degrades SNR (singal-to-noise ratio) of the NFP (near-field probe). This paper surveys SNR enhancement technologies of the NFS while maintaining wideband characteristics.

• Korean Journal of Environment and Ecology
• /
• v.24 no.5
• /
• pp.575-581
• /
• 2010

This study was accomplished for verifying the biotope field survey accuracy in the forests. Biotope data is used as the standard for the preservation and restoration of the urban ecosystem. The study area is the forests of Gwanak-gu, Seoul. For verifying accuracy, first we compared biotope field survey results between 2000 and 2005, second we compared between field survey results and satellite imagery. For comparing with satellite imagery, we delineated the evergreen-coniferous forests from imagery taken during winter season. As a result of comparison, the ratio of most actual vegetation types by delineated detail field surveys were matched around 92% between 2000 and 2005. But, between 2 field surveys, around 60% of total vegetation type was regionally matched. Evergreen-coniferous forests extracted by satellite imagery were regionally matched 69.4% of field survey result in 2000, and matched 80% of the result in 2005. If we consider the delineating errors from deciphering the picture, the results have high accuracy, especially 2005. The processes of verifying accuracy have not been proceeding in the part of delineating actual vegetation works. The verification of accuracy is important for the renewal process. Thus, the various verification methods will be studied and criteria should be developed for enhancing objectivity.

• Journal of Environmental Science International
• /
• v.3 no.1
• /
• pp.11-16
• /
• 1994

Generally, it is difficult to predict water quality in a tidal river, because tidal flows make the transport phenomena more complicated. The purpose of this study is to clarify long-term mass transport in a tidal river through suggestion of simulation model. A simulation model based on a Lagrangian coordinate system, which has the advantage reducing numerical dispersion, was used to calculate changes in concentration of chlorides. Several field surveys were conducted to verify calculated results. Concludingly, long-term behavior of mas transport in a tidal river can be represented using the model.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.64.3-64.3
• /
• 2017

For the detection of transient sources in optical wide field surveys like KMTNet Supernova Project, difference imaging technique is commonly used. As this method produces a fair amount of false positives, it is also common to utilize machine learning algorithms to screen likely true positives. While deep learning methods such as a convolutional neural network has been successfully applied recently, its application can be limited if the size of the training sample is small. I will discuss a variation of more conventional method that adopts the wavelet transform for feature engineering and its performance.