• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.322-327
• /
• 2019

This study was conducted to improve the performance of automatic grafting robot using image recognition technique. The stem diameters of tomatoes and cucumber at the time of grafting were $2.5{\pm}0.3mm$ and $2.2{\pm}0.2mm$ for scions and $3.1{\pm}0.7mm$ and $3.6{\pm}0.3mm$ for rootstocks, respectively. The grafting failure was occurred when the different height between scions and rootstocks were over 4 mm and below 2 mm due to the small contact area of both cutting surface. Therefore, it was found that the height difference at the cutting surface of 3 mm is appropriate. This study also found that grafting failure was occurred when the stem diameters of both scions and rootstocks were thin. Therefore, it was suggested to use at least one stem with thicker than the average stem diameter. Field survey on the cutting angle of stems by hand were ranged from 13 to 55 degree for scions and 15 to 67 degree for rootstocks, respectively, which indicates that this could cause the grafting failure problem. However, the automatic grafting robot developed in this study rotates the seedlings 90 degree and then the stems are cut using a cutting blade. The control part of robot use all images taken from grafting process to determine the distance between a center of both ends of stem and a gripper center and then control the rotation angle of a gripper. Overall, this study found that The performance of automatic grafting robot using image recognition technique was superior with the grafting success rates of cucumber and tomato as $96{\pm}3.2%$ and $95{\pm}4%$, respectively.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.729-742
• /
• 2020

In this study, we analyze seabottom conditions and characteristics integrated with topographic data, seafloor mosaic, underwater images and orthophoto(drone) of soft-hard bottom area around the Sib-Ri rock in the northern shore of the East Sea(Gyeongpo Beach, Gangneung). We obtained field survey data around the Sib-Ri rock(about 600 m × 600 m). The Sib-Ri rock is formed by two exposed rocks and surrounding reef. The artificial reef zone made by about 200 ~ 300 structures is shown the western area of the Sib-Ri rock. The underwater rock region is extended from the southwestern area of the exposed the Sib-Ri rock with 9 ~ 11 m depth range. The most broad rocky seabottom area is located in the southwestren area of the Sib-Ri rock with 10 ~ 13 m depth range. The study area were classified into 4 types of seabottom environment based on the analysis of bathymetric data, seafloor mosaics, composition of sediments and images(underwater and drone). The underwater rock zones(Type I) are the most distributed area around the Sib-Ri Rock(about 600 m × 600 m). The soft seabottom area made by sediments layer showed 2 types(Type II: gS(gravelly Sand), Type III: S(Sand)) in the areas between underwater rock zones and western part of the Sib-Ri rock(toward Gyeongpo Beach). The artificial reef zone with a lot of structures is located in the western part of the Sib-Ri rock. Marine algae(about 6 species), Phylum porifera(about 2 species), Phylum echinodermata(about 3 species), Phylum mollusca(about 3 species) and Phylum chordata(about 2 species) are dominant faunal group of underwater image analysis area(about 10 m × 10 m) in the northwestern part of the Sib-Ri rock. The habitat of Phylym mollusca(Lottia dorsuosa, Septifer virgatus) and Phylum arthropoda(Pollicipes mitella, Chthamalus challengeri hoek) appears in the intertidal zone of the Sib-Ri rock. And it is possible to estimate the range and distribution of the habitat based on the integrated study of orthphoto(drone) and bathymetry data. The integrated visualization and mapping techniques using seafloor mosaic images, sediments analysis, underwater images, orthophoto(drone) and topographic data can provide and contribute to figure out the seabottom conditions and characteristics in the shore of the East Sea.

• Communications of Mathematical Education
• /
• v.35 no.2
• /
• pp.173-191
• /
• 2021

This study noted that a survey of teachers in a leading study conducted in Korea during the Pandemics period pointed out that the "real-time interactive" classes account for a significantly small portion of the remote class format. Contentually, the study reported cases of developing and applying "real-time interactive" class materials based on "planar decision requirements" of high school mathematics subject geometry. The teacher who participated in the development was a math teacher who worked at a Seoul-based high school with 28 years of high school teaching experience, and a teacher who was in charge of geometry in the math department in 2020. The development teacher decided to develop real-time interactive classes. In particular, the materials were developed by organizing the class guidance plan in four stages: 'Meeting and Class Guidance', 'Giving motivation', 'Suggesting tasks', 'Individual Investigative Activities and Teacher Feedback' and 'Reflection and Evaluation' which were selected through the process of selecting the class contents and selecting online class tools. At this time, the development teacher produced and presented about five minutes of video material using the videooscribe, a whiteboard animation program. And in case of task number 8, it consisted of recording the students' free thoughts after class, which served as a role of assessment by students themselves and providing feedback to their teachers. This study is a case study that introduces a series of courses in which field teachers develop class materials, and in addition to presenting class materials that can be applied directly to classes, is a result of a study that focuses on the role of presenting samples for future class data development. The materials developed were verified as class materials based on the opinions of the students who participated in the class and the results of the evaluation commissioned by the three math teachers.

• Korean Journal of Environmental Biology
• /
• v.38 no.4
• /
• pp.634-649
• /
• 2020

Recently, stream longitudinal connectivity has been a topic of investigation due to the frequent disconnections and the impact of aquatic ecosystems caused by the construction of small and medium-sized weirs and various artificial structures (fishways) directly influencing the stream ecosystem health. In this study, the international and domestic research trends of the longitudinal connectivity in aquatic ecosystems were evaluated and the applicability of fish-based longitudinal connectivity models used in developed countries was analyzed. For these purposes, we analyzed the current status of research on longitudinal connectivity and structural problems, fish monitoring methodology, monitoring approaches, longitudinal disconnectivity of fish movement, and biodiversity. In addition, we analyzed the current status and some technical limitations of physical habitat suitability evaluation, ecology-based water flow, eco-hydrological modeling for fish habitat connectivity, and the s/w program development for agent-based model. Numerous references, data, and various reports were examined to identify worldwide longitudinal stream connectivity evaluation models in European and non-European countries. The international approaches to longitudinal connectivity evaluations were categorized into five phases including 1) an approach integrating fish community and artificial structure surveys (two types input variables), 2) field monitoring approaches, 3) a stream geomorphological approach, 4) an artificial structure-based DB analytical approach, and 5) other approaches. the overall evaluation of survey methodologies and applicability for longitudinal stream connectivity suggested that the ICE model (Information sur la Continuite Ecologique) and the ICF model (Index de Connectivitat Fluvial), widely used in European countries, were appropriate for the application of longitudinal connectivity evaluations in Korean streams.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.365-373
• /
• 2020

Biomonitoring Survey and Assessment Manual for lake ecosystem suggest zooplankton collection methods to compare relatively the number of species, population density, and community indices, taking into account the convenience of the field sampling according to the sites' water depth. In this study, the oblique towing and 20 m vertical towing methods presented in the manual were respectively compared with the whole water column-vertical towing and we analyzed the differences and characteristics of zooplankton community information gathered by each collection method. For community indices, there was no difference in the comparison of oblique/vertical towing methods in the shallow lake, but in the deep lake, the diversity and richness indices increased when vertically towing through whole water column rather than when limiting the towing depth to 20 m. In addition, the total zooplankton density collected by the oblique/20 m vertical towing methods was about three times higher than the whole water column-vertical towing method, which means that the density of zooplankton community can be overestimated depending on the collection methods. It appears to be results of differences in the zooplankton density by water layer arising from their vertical distribution and in filtered raw water quantity according to the towing depth/distance. Hence, for zooplankton community information to be used as a functional quantitative indicator representing the entire lake, it would be more appropriate to apply the whole water column-vertical towing method with considering the distribution of zooplankton density by depth and contribution rate of each water layer when converting total zooplankton density.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.42-50
• /
• 2021

Along with the rapid growth of the food service industry, food safety requirements and hygiene are increasing in importance in restaurants and hotels. Accordingly, there is a need for quick and practical monitoring techniques to determine hygiene status in the field. In this study, we investigated 5 domestic 5-star hotels specifically, personal hygiene (hands of workers), cooking utensils (knife, cutting board, food storage container, slicing machine blade, ice-maker scoop) and other facilities (refrigerator handle, sink). In addition, we examined the hygiene management status of customer contact points (tongs for buffet, etc.) to derive the correlation between the ATP values as a, a verification method. As a result of our five-hotel survey, we found that cooking utensils and personal hygiene were relatively sanitary compared to other inspection items (cookware 92.2%, personal hygiene 91.4%, facilities and equipment 76.19%, customer contact items 88.6%). According to our ATP-based mothod, kitchen utensils (51 ± 45 RLU/25㎠) were relatively clean compared to other with facilities and equipment (167 ± 123 RLU/25㎠). In the present study, we also evaluated the usefulness of the ATP bioluminescence method for monitoring surface hygiene at hotel restaurants. After correlation analysis of surveillance of hygienic status points and ATP assay, most results showed negative and high correlation (-0.64--0.89). Our ATP assay (92 ± 67 RLU/25㎠) of each item after cleaning showed signigicantly reduced results compared to the ATP assay (1020 ± 1254 RLU/25㎠) for normal status, thereby indicating its suitability as a tool to verify the validity of cleaning. By our results, ATP bioluminescence could be used as an effective tool for visual numerical evaluation of invisible contaminants.

• Journal of Environmental Impact Assessment
• /
• v.30 no.1
• /
• pp.13-23
• /
• 2021

In this study, we performed a Random Walker analysis to predict the Major Movement Paths of otters. The scope of the research was a simulation analysis with a radius of 7.5 km set as the final range centered on the Ansim-wetland in Daegu City, and a field survey was used to verify the model. The number of virtual otters was set to 1,000, the number of moving steps was set to 1,000 steps per grid, and simulations were performed on a total of 841 grids. As a result of the analysis, an average of 147.6 objects arrived at the boundary point under the condition of an interval of 50 m. As a result of the simulation verification, 8 points (13.1%) were found in the area where the movement probability was very high, and 9 points (14.8%) were found in the area where the movement probability was high. On the other hand, in areas with low movement paths probabilities, there were 8 points (13.1%) in low areas and 4 points (6.6%) in very low areas. Simulation verification results In areas with high otter values, the actual otter format probability was particularly high. In addition, as a result of investigating the correlation with the otter appearance point according to the unit area of the evaluation star of the movement probability, it seems that 6.8 traces were found per unit area in the area where the movement probability is the highest. In areas where the probability of movement is low, analysis was performed at 0.1 points. On the side where otters use the major movement paths of the river area, the normal level was exceeded, and as a result, in the area, 23 (63.9%), many form traces were found, along the major movement paths of the simulation. It turned out that the actual otter inhabits. The EN-Simulator analysis can predict how spatial properties affect the likelihood of major movement paths selection, and the analytical values are used to utilize additional habitats within the major movement paths. It is judged that it can be used as basic data such as to grasp the danger area of road kill in advance and prevent it.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.2
• /
• pp.87-102
• /
• 2022

To clarify the spatial distribution pattern of macrozoobenthos in Korean coastal waters in the summer season and investigate the relationship between community structure and benthic environmental factors, field surveys on community structure and benthic environmental factors were conducted at 117 stations in August 2017. A total of 613 macrobenthic species were identified, with the mean density of 1,228 ind./m² and the mean biomass (wet weight) of 110.9 g WW/m². Rich biodiversity was found at stations near Wando and along the coast of the East Sea, and there is a trend that stations with greater biodiversity also showed higher mean density as well. The dominant species in all the coastal areas in Korea was Heteromastus filiformis, which were found at most of the stations during the survey. The relatively deep areas in the East Sea were dominated by Magelona johnsoni and Maldane cristata, which were the third and ninth dominant species in the study areas, respectively. Pseudopolydora kempi and Rhynchospio sp. were observed only at the station located in the Nakdong River estuary. From the cluster analysis the stations could be clustered into three station groups with more similar faunal composition. Group A was located in the eastern coast, characterized with deep water depth and low levels of sand contents, while Group B was located in the southern coast, characterized by shallow depth of water and high content of mud and organic matter. Lastly, Group C was in the western coast, demonstrating low levels of mud content and organic matters. The biodiversity of macrobenthic species in the study area showed high positive correlation coefficients with benthic environmental factors such as sorting, clay, silt, and contents of organic matter in sediments, but negatively correlated with the sand contents. Major dominant species, Theora lata and Eriopisella sechellensis, both showed negative correlation coefficients with the sand contents, but a relatively high positive correlation with the levels of organic contents.It can be concluded that the spatial distribution patterns of macrobenthic organisms in Korean coastal waters are affected by depth, sediment type, and contents of organic matters.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.4
• /
• pp.47-60
• /
• 2021

Recently, as the occurrence frequency of sudden floods due to climate variability increased, the damage of aging chuteway slabs of spillway are on the rise. Accordingly, a wide array of field survey, hydraulic experiment and numerical simulation have been conducted to find the cause of damage on chuteway slabs. However, these studies generally reviewed the flow characteristics and distribution of pressure on chuteway slabs. Therefore the derivation of damage on chuteway slabs was relatively insufficient in the literature. In this study, the cavitation erosion and hydraulic jacking were assumed to be the causes of damage on chuteway slabs, and the phenomena were reproduced using 3D numerical models, FLOW-3D and COMSOL Multiphysics. In addition, the cavitation index was calculated and the von Mises stress by uplift pressure distribution was compared with tensile and bending strength of concrete to evaluate the possibility of cavitation erosion and hydraulic jacking. As a result of numerical simulation on cavitation erosion and hydraulic jacking under various flow conditions with complete opening gate, the cavitation index in the downstream of spillway was less than 0.3, and the von Mises stress on concrete was 4.6 to 5.0 MPa. When von Mises stress was compared with tensile and bending strength of concrete, the fatigue failure caused by continuous pressure fluctuation occurred on chuteway slabs. Therefore, the cavitation erosion and hydraulic jacking caused by high speed flow were one of the main causes of damage to the chuteway slabs in spillway. However, this study has limitations in that the various shape conditions of damage(cavity and crack) and flow conditions were not considered and Fluid-Structure Interaction (FSI) was not simulated. If these limitations are supplemented and reviewed, it is expected to derive more efficient utilization of the maintenance plan on spillway in the future.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.41-54
• /
• 2022

The purpose of this study was to propose a "user experience (UX)-centered product development process" so that the product design development process using the service design process can be systematized and used in practice. In a situation in which usability research on office phones is lacking compared to general home phones, this study expands to a product-based service design point of view rather than simple product development, intending to research ways to provide user experience value through office phone design in smart office. This study focused on extracting UX-centered user needs using the service design process and developing product design that realizes user experience value. In particular, the service design process was applied to systematically extract user needs and experience value elements in the product development process and to discover ideas that were converged with product-based services. For this purpose, the "Double Diamond Design Process Model," which is widely used in the service design field, was adopted. In addition, a product design development process was established so that usability improvement plans, user experience value elements, and product-service connected ideas could be extracted through a work-flow in which real users and people from various fields participate. Based on the double diamond design process, in the "Discover" information collection stage, design trends were identified mainly in the office phone markets. In the "Define" analysis and extraction stage, user needs were analyzed through user observation, interview, and usability survey, and design requirements and user experience issues were extracted. Persona was set through user type analysis, and user scenarios were presented. In the "Develop" development stage, ideation workshops and concept renderings were conducted to embody the design, and people from various fields within the company participated to set the design direction reflecting design preference and usability improvement plans. In the "Deliver" improvement/prototype development/evaluation stage, a working mock-up of a design prototype was produced and design and usability evaluation were conducted through consultation with external design experts. It is meaningful that it established a "UX-centered product development process" model that converged with the existing product design development process and service design process. Ultimately, service design-based product design development process was presented so that I Corp.'s products could realize user experience value through service convergence.