• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.127-130
• /
• 2005

The feasibility of stimulating in situ aerobic cometabolic activity of indigenous microorganisms was investigated in a trichloroethene(TCE)-contaminated aquifer, A series of single-well natural drift tests (SWNDT) was conducted by injecting site groundwater amended with a bromide tracer and combinations of toluene, oxygen, nitrate, ethylene and TCE into an existing monitoring well and by sampling the same well over time. Transformation of ethylene, a surrogate of overall TCE transformation activity, was also observed, and its transformation results in the production of ethylene oxide, suggesting that some tolune-oxidizing microorganisms stimulated may express a monooxygenase enzymes. Also in situ transformation of TCE was confirmed by dilution-adjusted data analysis developed in this study. These results indicate that, in this environment, toluene and oxygen additions stimulated the growth and aerobic cometabolic activity of indigenous microorganisms expressing monooxygenase enzymes and that these are responsible for observed toluene utilization and cometabolism of ethylene and TCE. The simple, low-cost field test method provides an effective method for conducting rapid field assessments and pilot testing of aerobic cometabolism of TCE, which has previously hindered application of this technology to groundwater remediation.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.63-74
• /
• 2014

PURPOSES: This research is to evaluate the mechanical performance of different types of Hot Mix Asphalt (HMA) pavement cells prepared for MN/Road field testing section through an extensive experimental analysis of air voids and simple statistical evaluation tools (i.e. hypothesis test). METHODS: An extensive experimental work was performed to measure air voids in 82 asphalt mixture cores (238 samples in total) obtained from nine different types of road cell located in MN/Road testing field. In order to numerically and quantitatively address the differences in air voids among the different test Cells built in MN/Road, a simple statistical test method (i.e. t-test) with 5% significance was used. RESULTS: Similar trends in air voids content were found among the mixtures including conventional HMA, Reclaimed Asphalt Pavement (RAP) and Warm Mix Asphalt (WMA) combined with taconite aggregate this provides support to the use of RAP and WMA technology in the constructions of asphalt pavement. However, in case of acid modified HMA mixtures, significant differences in air void content were observed between on the wheel path and between wheel path location, which implies negative performances in rutting and thermal cracking resistances. Conclusions : It can be concluded that use of RAP and WMA technology in the construction of conventional asphalt pavement and the use of PPA (Poly Phosphoric Acid) in combinations with SBS (Styrene Butadiene Styrene) in asphalt binder production provide satisfactory performance and, therefore, are highly recommended.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.143-146
• /
• 2005

Many data mining techniques have been proved useful in revealing important patterns from large data sets. Especially, data mining techniques play an important role in a customer data analysis in a financial industry and an electronic commerce. Also, there are many data mining related research papers in a semiconductor industry and an automotive industry. In addition, data mining techniques are applied to the bioinformatics area. To satisfy customers' various requirements, each industry should develop new processes with more accurate production criteria. Also, they spend more money to guarantee their products' quality. In this manner, we apply data mining techniques to the production-related data such as a test data, a field claim data, and POP (point of production) data in the automotive parts industry. Data collection and transformation techniques should be applied to enhance the analysis results. Also, we classify various types of manufacturing processes and proposed an analysis scheme according to the type of manufacturing process. As a result, we could find inter- or intra-process relationships and critical features to monitor the current status of the each process. Finally, it helps an industry to raise their profit and reduce their failure cost.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.190-198
• /
• 2018

The Epoxy-coated Reinforcing bars have been proved to be able to extend a durability life because of its excellent corrosion resistance in bridges and structures under marine and severe environments. The usage of epoxy-coated reinforcement is continuously increasing in developed countries such as the US and Japan. However, domestic use is extremely limited due to lack of research and development, poor production facilities, low quality, increase of initial costs, and difficulty of field management. This study suggests the improvement of construction quality management such as manufacturing, transportation and construction for the field application through the test construction of the proven product in the related test results of the epoxy coated steel bars produced in the recently improved manufacturing facility.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.42-46
• /
• 2005

In spite of fast growing of prediction codes, there is still not negligible uncertainty in their results. This uncertainty affects on the turbine structural design and power production prediction. With the growing size of wind turbine, reducing this uncertainty is becoming one of critical issues for high performance and efficient wind turbine design. In this respect, there are international efforts to evaluate and tune prediction codes of wind turbine. As the reference data for this purpose, field test data is not appropriate because of its uncontrollable wind characteristics and its inherent uncertainty. Wind tunnel can provide controllable wind. For this reason, NREL has done the full scale test of the 10m turbine at NASA-Ames. With this reference data, a blind comparison has been done with participation of 18 organizations with 19 modeling tools. The results were not favorable. In Europe, a similar project is going on. Nine organizations from five countries are participating in the MEXICO project to do full scale wind tunnel tests and calculation with prediction codes. In this study. these two projects were reviewed in respect of wind tunnel test and its contribution. As a conclusion, it is suggested that scale model wind tunnel tests can be a complementary tool to calculation codes which were evaluated worse than expected.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.105-111
• /
• 2016

In order to inspect the quality of spot welding, inefficient destructive test and NDT (non destructive testing) utilizing expensive foreign ultrasonic inspection are being conducted in the automobile production lines, but NDT will be difficult to be used in the domestic automobile production due to complexity of the waveform analysis and lack of mobility. In this paper, NDT system inspecting the quality of spot welding based on mobile network is proposed to complement drawbacks of the conventional inefficient destructive testing and NDT inspecting the quality of spot welding. Regardless of daily condition of NDT tester, the proposed NDT system can determine the quality of spot welding automatically and transmit the information of NDT quality to smart devices of field workers in real-time so that convenience of NDT and productivity of automobile production will be improved. Several specimens with a variety of welding quality was produced to evaluate the performance of the proposed mobile ultrasonic NDT system and the conventional foreign equipment, through this experiments, the proposed mobile ultrasonic NDT system indicate the superior properties compared to the conventional equipment in terms of convenience, productivity, and economic.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.827-834
• /
• 2000

A granular herbicide applicator attached to conventional ride-on rice transplanter with 6 rows was developed in order to carry out both transplanting and herbicide application at once. It resulted in labor saving by 98%. The prototype is composed of a metering device and a spinning disc spreader. The application rate per 10a can be varied from 1 to 3 kg and the application swath is 1.8 m, which is the planting width of the ride-on rice transplanter with 6 rows. The angular speed of spinning disc and the application height were used as design factors to obtain the uniform distribution of herbicide granules. As the result of experiment, the distribution uniformity showed a tendency to be proportional to the increases of both spinner angular speed and application height. The prototype with angular speed of spinning disc of 7359 rpm and the application height of 20 cm was made and its distribution uniformity was relatively uniform with the CV(coefficient of variation) of 21.7%. In field test, when the tested herbicides such as ACl40+Stomp and Londax+YRC were applied, the weed control has continued for 65 days since transplanting was done.

• Journal of Ecology and Environment
• /
• v.33 no.3
• /
• pp.253-260
• /
• 2010

It has been well established that leaf longevity is linked to the carbon economy of plants. We used this relationship to predict leaf lifetime carbon gains from leaf lifespan, and estimated the gross primary production (GPP) of a young deciduous forest of Japanese beech (Fagus crenata) located in central Japan. The light-saturated photosynthetic rates of the leaves were measured repeatedly during the growing season. We used the leaf lifespan to calculate the conversion coefficient from the light-saturated photosynthetic rate into the realized leaf lifetime carbon gain under field conditions. The leaf turnover rate was estimated using litter traps. GPP was estimated as the product of lifetime carbon gain per unit of leaf mass, and the annual leaf turnover rate. The GPP of the forest in 2007 was estimated to be $1.2{\times}10^3gCm^{-2}y^{-1}$, which was within the range of previously reported GPP values of beech forests in Japan, and was close to the GPP of a European beech forest, as estimated by eddy flux measurements.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.611-612
• /
• 2006

Many data mining techniques have been proved useful in revealing important patterns from large data sets. Especially, data mining techniques play an important role in a customer data analysis in a financial industry and an electronic commerce. Also, there are many data mining related research papers in a semiconductor industry and an automotive industry. In addition, data mining techniques are applied to the bioinformatics area. To satisfy customers' various requirements, each industry should develop new processes with more accurate production criteria. Also, they spend more money to guarantee their products' quality. In this manner, we apply data mining techniques to the production-related data such as a test data, a field claim data, and POP (point of production) data in the automotive parts industry. Data collection and transformation techniques should be applied to enhance the analysis results. Also, we classify various types of manufacturing processes and proposed an analysis scheme according to the type of manufacturing process. As a result, we could find inter- or intra-process relationships and critical features to monitor the current status of the each process. Finally, it helps an industry to raise their profit and reduce their failure cost.

• The Korean Journal of Community Living Science
• /
• v.17 no.2
• /
• pp.105-112
• /
• 2006

The biodegradability test of bulking agents in feces composting process is conducted to increase the management efficiency for environment-friendly rural toilet developed by National Rural Resource Institute in 2001. In the case study through references and field study, ash, fallen leaves, and wood chips are commonly used in the ecological toilet. Extension officers and farmers prefer rice straw, fallen leaves, and chaff among the rural resources as a bulking agents in the aspect of getting and storage as the result of questionnaire survey. As the result of biodegradability test including the temperature change, $CO_2$ gas production, and C/N ratio change of composting pile under the condition of aerobic composting apparatus, rice straw and chaff are good bulking agents for environment-friendly rural toilet. It is recommended that easy getting materials among the above mentioned materials are used for bulking agents as the region and season in environment-friendly rural toilet.