• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.490-495
• /
• 2005

Organic compost has been widely applied to the cropland because it has been thought as Environmentally Sound Agriculture (ESA) in Korea. However, many field researches have been done to investigate water quality impacts of organic compost uses, compared to those from chemical fertilizer applications. It was found that pollutant loads from organic compost applied croplands were higher than those from chemical fertilizer applied areas. However, there might be other unknown factors affecting the results since the experiments were performed at the outside fields. In this study, indoor rainfall experiments using the Norton rainfall simulator systems were done to minimize and exclude errors from unknown sources by controlling soil characteristics, rainfall amount, rainfall intensity, and fertilizer treatments. The amounts of surface runoff and groundwater percolated from 10% and 20% slope plots were measured and water quality samples were collected and analyzed for BOD, COD, and T-P. Flow weighted mean concentration (FWMC) values were computed to assess effects of different fertilizer treatments. It was found that average concentration values of BOD were 5.57 mg/L from chemical fertilizer treated plot and 8.08 mg/L from organic compost treated plots. For 10% slope, FWMC BOD values from organic compost treated plots were higher by 29.9% than those from chemical fertilizer treated plots. For 20% slope, FWMC BOD values from organic plots were higher by 38.8% than those from chemical fertilizer plots. FWMC BOD values for 20% slope plots were higher than those from those for 10% slope plots. The similar trends were found for COD and T-P. In Korea, excessive use of organic compost has caused extremely high levels of organic matter contents at the cropland. Organic compost are usually applied to the cropland to improve soil quality, while chemical fertilizer is applied to help crop growth. Since organic compost is very slow in releasing its nutrients to the soil, farmers usually apply excessive organic compost for immediate effects and maximum crop yields, which has been causing soil and water quality degradations. Therefore, thorough investigations for better nutrient management plans are needed to develop the ESA strategy in Korea.

• Archives of design research
• /
• v.15 no.1
• /
• pp.143-152
• /
• 2002

As the Internet has been a daily instrument of our lives, the numbers of Internet users are increasing rapidly. Especially, we have to pay special attention to about rapid increasing of juvenile users. In the 1990's, Kids are growing up literally surrounded by new technologies and mu1timedia experiences. For these kids, most of the techno1ologies that we adults find surprising or even incredible are a part of their everyday landscape, a fact of life. Currently, only few of research and discussion has gone into understanding this field. And most of these web sites, set importance on furnishing information only. So educational characters of web are not manifested fully as well as children soon get board with learning with Internet so that feel difficulties in searching and accepting information. At this point, we must try to develop educational sites Not only to show information but also to offer a rich and entertaining time for kids while providing playful teaming and increased technological fluency. Fer this purpose, Web site should be all about combining play with learning. Site navigation should be easy and the pages load quickly. The page download time is also being considerable, which could send kids withy mouse-fingers looking for entertainment elsewhere. Everything about the site must have a familiar feel, uses adequate colors to be satisfied with the juveniles. Multimedia can help the communications in the websites. To maximize the educational effect, technological research and continues invest are need, in addition to usability test.

• Journal of Fashion Business
• /
• v.3 no.4
• /
• pp.83-91
• /
• 1999

The purpose of this study is to provide some useful references to the educational field in terms of providing on analysis of job characteristics of fashion designers working in the women's wear industries. The data were collected from 102 fashion designers working in women's wear industries through the questionnaire and were analyzed by SPSS packages of frequencies and percentiles for comparative study, and the results are as follows: 1. The demographic characteristics of the fashion designers are; unmarried (80.4%), working less than 2 years (20.2%), completion of junior college(68.6%), majority ages between 20-24 yrs(43.1%). An average length of working in one company war less than 6 months. 2. The ratio computer usage of the design room was approx. 52.0% especially in the management of sales (52.9%) and the ratio in fashion design was approx. 17.6% in merchandising planning. 3. 76.4% of respondents was working 10 hours a day, and 50% of them was dissatisfied on the job caused by excessive working hour (31.4%) and job over load (35.3%). In the developing fashion design with the relation of actual job, insufficient knowledges of the concerned technical and production fields (68.6%) were indicated as the most difficult area. In addition, fashion magazines were considered as the most helpful resource(94.1%). 4. It was noted that the target age groups for the brand were clearly divided into two groups, notably the early and middle of twenties and the early and middle forties. Among the produced items, formal wears were accounted for 52.9%. 5. As far as the contents of job are concerned, the fashion designers are mostly engaged in purchasing textile, collecting informations of fashion, quality control, whereas their actual job is apparel design. 6. The training that the fashion designer received beside formal education includes attendance of private institutes(62.7%), OJT(7.8%), seminars(4.9%). Regarding formal education, the respond indicated that they had least opportunity to received computer training. 7. The necessary subjects in the schools for the fashion designers in relation to the current job were fashion information, merchandising planning, pattern making, cutting, fashion marketing, knowledges of clothing material in sequence. Subjects which are necessary for the further development include pattern making(21.6%), fashion marketing(14.7%), and designing with computer(7.8%).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.5
• /
• pp.92-100
• /
• 2011

This paper describes a numerical modeling for deflection calculation using the natural frequency response that is measured acceleration response for concrete bridges. In the formulation of the dynamic deflection, the change amounts and the transformed responses about six kinds of free vibration responses are defined totally. The predicted response can be obtained from the measured acceleration data without requiring the knowledge of the initial velocity and displacement information. The relationship between the predicted response and the actual deflection is derived using the mathematical modeling that is induced by the process of a acceleration test data. In this study, in order to apply the proposed response predicted model to the integration scheme of the natural frequency domain, the Fourier Fast Transform of the deflection response is separated into the frequency component of the measured data. The feasibility for field application of the proposed calculation method is tested by the mode superposition method using the PSC-I bridges superstructures under several cases of moving load and results are compared with the actually measured deflections using transducers. It has been observed that the proposed method can asses the deflection responses successfully when the measured acceleration signals include the vehicle loading state and the free vibration behavior.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.22-32
• /
• 2014

Durability is one of the most important and attractive subjects in concrete research field because not only durability of concrete is reduced by various degradation factors but also its reduction adversely influences the structural performance and service life of concrete structure. For this reason, a considerable amount of papers associated with concrete durability have been published and those researches were mainly focused on the changes of intrinsic properties of concrete due to chemicophysical degradations. However, the relationship between durability of concrete and structural behavior of concrete member has not been well established yet. In this study, calcium leaching degradation, a cause of concrete strength reduction, was dealt with. The experiments of compressive and flexural behavior of degraded concrete member were performed to evaluate the characteristics of structural behavior according to degradation level. Finally, the results from the experiments were compared with those obtained from nonlinear FEM analysis. The results from this study clearly showed that leaching degradation leads to decrease in compressive strength and compressive behavior evolves from brittle to ductile failure pattern during the degradation process. Load capacity and flexible rigidity of the degraded RC member decreased when the degradation level increased, in compressive zone. Additionally, it was found that the values from nonlinear FEM analysis, CDP model in ABAQUS, coincided well with the experimental results.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.12
• /
• pp.5-12
• /
• 2015

Since blasting noise is impact noise, it will give a sudden shock to the human. In the case, such as the blast vibration, it has given aging buildings and livestock great damage to move the vibration along ground in nearby regions. In this study, the influence of the blasting generated during excavation was analyzed for effects on regional. A couple of field and laboratory surveys about geological were carried out to figure out the geological ratio in the study-performed area. Blast vibration noise was compared to the domestic and abroad case studies and each of the institutions permissible standards established the most appropriate criteria in site condition. The vibration velocity of blasting vibration exploits the values which were measured from test blasting on the ground in order to examine blasting effect. Considering the blasting point as the shortest distance from safety facilities (farms, private houses, etc.), the examination of the influence range, which was derived from the vibration velocity of blasting vibration, was performed to figure out how the point affected the safety facilities. Three-dimensional numerical analysis was performed a time history analysis in order to analyze the behavior of the structure for a dynamic blast load, which was determined in three directions of the blast vibration value. The results of three-dimensional numerical analysis and the blasting effect of blasting vibration estimation equation blasting vibration of impact circle with accompanying test blasting were compared. And the analysis confirmed similar results figures.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1995.10a
• /
• pp.15.2-22
• /
• 1995

Evaluating stiffness of near-surface materials has been one of the critically important tasks in many civil engineering works. It is the main goal of geotechnical characterization. The so-called deflection-response method evaluates the stiffness by measuring stress-strain behavior of the materials caused by static or dynamic load. This method, however, evaluates the overall stiffness and the stiffness variation with depth cannot be obtained. Furthermore, evaluation of a large-area geotechnical site by this method can be time-consuming, expensive, and damaging to many surface points of the site. Wave-propagation method, on the other hand, measures seismic velocities at different depths and stiffness profile (stiffness change with depth) can be obtained from the measured velocity data. The stiffness profile is often expressed by shear-wave (S-wave) velocity change with depth because S-wave velocity is proportional to the shear modulus. that is a direct indicator of stiffiiess. The crosshole and downhole method measures the seismic velocity by placing sources and receivers (geophones) at different depths in a borehole. Requirement of borehole installation makes this method also time-consuming, expensive, and damaging to the sites. Spectral-Analysis-of-Surface-Waves (SASW) method places both source and receivers at the surface, and records horizontally-propagating surface waves. Based upon the theory of surfacewave dispersion, the seismic velocities at different depths are calculated by analyzing the recorded surface-wave data. This method can be nondestructive to the sites. However, because only two receivers are used, the method requires multiple measurements with different field setups and, therefore, the method often becomes time-consuming and labor-intensive. Furthermore. the inclusion of noise wavefields cannot be handled properly, and this may cause the results by this method inaccurate. When multi-channel recording method is employed during the measurement of surface-waves, there are several benefits. First, usually single measurement is enough because multiple number (twelve or more) of receivers are used. Second, noise inclusion can be detected by coherency checking on the multi-channel data and handled properly so that it does not decrease the accuracy of the result. Third, various kinds of multi-channel processing techniques can be applied to f1lter unwanted noise wavefields and also to analyze the surface-wavefields more accurately and efficiently. In this way, the accuracy of the result by the method can be significantly improved. Fourth, the entire system of source, receivers, and recording-processing device can be tied into one unit, and the unit can be pulled by a small vehicle, making the survey speed very fast. In all these senses, multi-channel recording of surface waves is best suited for a routine method for geotechnical characterization in most of civil engineering works.

• Journal of the Korean Society for Railway
• /
• v.14 no.5
• /
• pp.433-441
• /
• 2011

It is a fact that the straightening of track alignment is one of the undoubted ways to improve the train speed on conventional lines, while that requires huge investment resources. Therefore, the operation of a tilting train as well as the minimum improvement of track is suggested as an effective and economical alternative way for the speed-up of conventional lines. Since a driving mechanism of tilting train is different from those of existing trains, in order to make sure its operation safety and stability on conventional line, the performance of track and roadbed must be preferentially evaluated on the conventional line. Furthermore, it is necessary to estimate the tilting-train-induced roadbed response in detail since the roadbed settlement can lead to the track deformation and even derailment. In this research, the patterns of wheel load and lateral force were monitored and analyzed through the field tests, and the derailment coefficient and degree of wheel off-loading were calculated in order to evaluate the tilting train running safety depending on the running speeds (120km~180km) on the conventional line. Moreover, roadbed pressure, settlement and acceleration were also observed as tilting-train-induced roadbed responses in order to estimate the roadbed stability depending on the running speeds. Consequently, the measured derailment coefficient and degree of wheel off-loading were satisfied with their own required limits, and all of the roadbed responses were less than those of existing high-speed train (KTX) over an entire running speed range considered in this study. As a result of this study, the tilting train which will be operated in combination with existing trains is expected to give no adverse impact on the conventional line even with its improved running speed.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.580-586
• /
• 2016

Cr-Si-Al-N coating with different Si content were deposited by hybrid physical vapor deposition (PVD) method consisting of unbalanced magnetron (UBM) sputtering and arc ion plating (AIP). The deposition temperature was $300^{\circ}C$, and the gas ratio of $Ar/N_2$ were 9:1. The CrSi alloy and aluminum targets used for arc ion plating and sputtering process, respectively. Si content of the CrSi alloy targets were varied with 1 at%, 5 at%, and 10 at%. The phase analysis, composition and microstructural analysis performed using x-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) including energy dispersive spectroscopy (EDS), respectively. All of the coatings grown with textured CrN phase (200) plane. The thickness of the Cr-Si-Al-N films were measured about $2{\mu}m$. The friction coefficient and removal rate of films were measured by a ball-on-disk test under 20N load. The friction coefficient of all samples were 0.6 ~ 0.8. Among all of the samples, the removal rate of CrSiAlN (10 at% Si) film shows the lowest values, $4.827{\times}10^{-12}mm^3/Nm$. As increasing of Si contents of the CrSiAlN coatings, the hardness and elastic modulus of CrSiAlN coatings were increased. The morphology and composition of wear track of the films was examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy, respectively. The surface energy of the films were obtained by measuring of contact angle of water drop. Among all of the samples, the CrSiAlN (10 at% Si) films shows the highest value of the surface energy, 41 N/m.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.59-65
• /
• 2017

The purpose of this study is to investigate the factors and effects of job stress of construction workers on construction accidents and turnover intention in order to improve the field work environment of construction industry which shows higher industrial accidents than other industries. To this end, research models and hypotheses were established based on previous research, and the questionnaire was distributed to 10 construction companies in Daejeon, Sejong, and Chungcheong provinces. The 301 data collected were performed statistical analysis such as basic statistical analysis, factor analysis, reliability analysis, correlation analysis, regression analysis, and logistic regression analysis using the statistical package (IBM SPSS 22). The results of this study are summarized as follows. First, job stress has a significant effect on accident occurrence. Among the sub-factors of job stress, there was positive (+) influence on work culture and relationship conflict between peers, and organizational system had negative influence. Job demands, compensation incompetence, and job instability were not statistically significant. Therefore, it is necessary to concentrate on the factors of work culture, organizational system, and relationship conflict in the construction site. Second, job stress has positive effect on turnover intention. Job stress, inadequacy of compensation, and work culture were positively related to turnover intention. Third, job demands have a slightly greater impact than compensatory inadequacies. The factors that make the job turnover more important are the excessive job burdens such as respect, internal motivation, responsibility rather than expectation non-conformity, time pressure, increase of work load. Therefore, in order to reduce the turnover intention of the construction worker, it is necessary to pay attention to improvement of the job requirement. Fourth, the worker's job stress could overcome by exercise and fatigue elimination, work environment management, and self-opening for others. It is necessary to establish a work environment management system for counseling and intimacy formation to open up the exercise and fatigue relief program of the workers at the construction site and to open themselves between the workers and the supervisors.