• 원예과학기술지
• /
• 제17권3호
• /
• pp.329-332
• /
• 1999

대목재식 후 2년차에 측지가 10개 이상 발생 된 우량묘를 생산하기 위하여 삭아접시기 및 대목 절단시기에 따른 수체생육 특성과 측지발생에 미치는 적엽 및 promalin 처리 효과를 시험한 결과, 대목재식 후 약 90일 정도 경과한 6월중순경에 삭아접을 실시하는 것이 4월 중순에 삭아접을 하는 것보다 재식 1년차의 수체생육은 떨어지지만 접아고사주율이 평균 8% 정도 낮았다. 또한 M.9 대목 절단시기에 있어서는 삭아접전절단(ECCB)을 실시하는 것보다 삭아 접후절단을 할 경우, 접아고사율이 14% 정도 낮아 수체 생장의 균일도가 높으면서 접목효율이 높은 것으로 나타났다. 재식 2년차인 1998 년도에 접목시기 및 M.9 대목 절단시기에 따른 적엽(3회) 및 promalin(3회) 처리효과를 조사한 결과, 6월 중순 삭아접후절단(LCCB) 처리 구에서 측지발생 효과 및 화아형성 정도가 다른 처리에 비하여 가장 좋았다. 묘목 특성으로는 수고 209cm, 측지수 13.8개, 화아형성수 9.0개로 우량한 측지묘 조건에 부합한 묘목이 생산되었다.

• 스마트미디어저널
• /
• 제9권3호
• /
• pp.107-115
• /
• 2020

최근 건설분야에 3차원 설계기술인 BIM이 의무화 되면서 다양한 활용사례에 대한 연구가 증가하고 있다. 특히 4차산업혁명의 핵심기술 중의 하나인 가상현실 기술과 BIM이 융합되면 사전 설계검토, 시공시뮬레이션 등 다양한 분야에 활용될 수 있다. 하지만 현재까지 가상현실 접목기술이 단순 프로토타입 수준이거나 모델하우스 정도에만 활용되고 있다. 또한 품질이 높은 가상현실 콘텐츠 제작시 비용이 많이 들기 때문에 관련 분야의 활성화가 어려운 상황이다. 이에 본 논문에서는 가상건설분야 활용도 및 품질을 높이기 위해 BIM을 활용해서 가상현실 콘텐츠를 제작할 때 시간 소요가 많이 발생하는 재질 매핑 시간을 단축시키는 연구를 진행하였다. 이를 위해 BIM 모델시 재질 매핑 가능하도록 객체 속성을 부여하였고, 건설분야에 가장 많이 활용되는 재질을 구성하였으며, 속성과 재질을 자동으로 매핑해 주는 자동화 머터리얼 기능 개발과 최종 테스트를 진행하였다. 테스트를 위해서 10개의 모델을 활용해서 3회 반복 테스트를 하여 최종적으로 약 50.16%의 생산성 향상을 달성하였다. 향후에는 재질 매핑 자동화 기능 고도화를 포함하여 대용량 BIM 모델을 기반으로 물리적인 데이터 경량화를 포함하여 BIM 데이터를 기반으로 가상현실 콘텐츠 제작과 관련된 생산성 향상 연구를 진행할 예정이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제15권1호
• /
• pp.49-61
• /
• 1993

The transplantation of cartilage, especially auricular cartilage, has assumed a role of importance in the field of plastic and reconstructive surgery. From long years ago, many reports have appeared in the literature describing the experimental and clinical results of the use of cartilage. At present, the evidence for survival of autograft of cartilage is admitted, But, the results for interrelationship between the bone and cartilage grafts with or without perichondrium is not so conclusive. The purpose of this study were observed as to whether autogenous cartilage grafts were fixed by means of tie with 4-0 vicryl and fibrin adhesive on the femur or microscopic findings of union state in 16 rabbits. We sacrified the experimental animals after 1, 2, 4, 6 weeks postoperatively and made the specimens as a routine laboratory procedures and stained with Hematoxylin-Eosin stain, Verhoeff-van Gieson elastic fiber stain, and alcian blue periodic acid-Schiff(AB-PAS) for mucopolysaccharide. Histologic evaluation was performed under microscope. The obtaind results were as follows : 1. Fibrous union was formed between the grafting cartilage and the femur, nor any findings of calcification and formation of new bone. 2. Partial fibrous adhesion was observed in fibrin adhesive groups on 6 weeks postoperatively. 3. Appositional growth has performed more in fibrin adhesive groups than tie groups. 4. There are little difference in both for new copillary proliferation and fibroblast activations. 5. Degenerative changes have apperared more in tie groups than adhesive groups, but not related to the healing periods.

• 한국잠사곤충학회지
• /
• 제34권1호
• /
• pp.49-56
• /
• 1992

반응개시제로 potassium persulfate를 사용하여 견섬유에 MAA를 처리하였을 때의 반응 mechanism을 구명하기 위하여, 열분석과 일련의 기구분석을 행하였으며, 이 중 열분석에 의해 얻어진 결과는 다음과 같다. Differential scanning calorimeter 관찰로부터는 metharcrylamide에 의한 가공견섬유는 견 fibroin과 methacrylamide polymer의 열분석에 의한 peak가 뚜렷하게 분리되어 나타났으며, 가공율이 증가함에 따라 두 peak가 모두 고온측으로 이동하는 것으로 나타났다. 가공견섬유의 흡습율은 가공율이 증가함에 따라 증가하였다.

• Journal of Multimedia Information System
• /
• 제1권2호
• /
• pp.111-118
• /
• 2014

The Smart grid refers to the technology that enables efficient usage of electric power by collecting information concerning the power usage and power lines grafting information and communications technology to onto power grids. There are Zigbee, PLC or IEEE 802.11 WLAN MAC as a core technology of the Smart grid, but in this paper, the discussion is focused on the PLC. The PLC is the technology that carries out data communications using power lines and put into practical use in the field of lights or home appliances control recently but PLC-applied communications between electronic devices are rarely seen. For the reason that the PLC uses high-voltage power lines and has a disadvantage of experiencing higher data loss rate caused by the noises produced by going through transformers, the technology is yet to be used in many areas. Nevertheless, the PLC has been studied widely recently in respect that it's the low-cost communication solution for the Smart Metering [1]. Moreover, this technology is emerging as a novel data communication method and discussed as an important technology lately due to the developments of the Smart grid systems and Internet of things (IoT). Thus, in this paper, the results obtained from designing and performing implementation scenario for the PLC-based Smart grid home network system were compared and analyzed with that of IEEE 802.11 WLAN MAC (the foundation technology at Jeju Smart grid Test bed)-based Smart grid home network. Thus, in this paper, OPNET 14.5 PL8, OSI 7 layer, PLC router nodes and PLC nodes had been used for the designing and implementation simulations of both systems. Additionally, QoS was not considered in order to guarantee that all the traffics would not have the same processing priority.

• 한국정보과학회논문지:시스템및이론
• /
• 제33권1_2호
• /
• pp.44-51
• /
• 2006

본 논문에서는 동시공학적 생산개념을 부재 생산자동화에 적용시킨 웹 기반의 통합 네스팅 시스템을 제안한다. 일반적으로 판재 부재 생산 공정은 정해진 순서에 따라 순차적으로 진행된다. 그러나 본 논문에서는 이들 공정들의 특성을 분석하여 클라이언트/서버 환경에서 운용될 수 있도록 분산 설계하였다. 그리고 판재 부재 생산에 필요한 부재 CAD, 네스팅, 부재 CAM, NC포스트프로세서 기능들을 웹 환경에서 다수의 작업자가 시스템에서 일괄 처리할 수 있도록 구현하였다. 개발된 시스템은 기존의 상용시스템에 비해 생산 자동화의 통합작업 환경을 제공할 수 있고, 작업자간의 공동작업이 가능하며, 작업대기 시간을 단축할 수 있음을 입증하였다. 본 논문은 부재생산 자동화분야에 컴퓨터 시스템 기술들을 접목함으로서 공장자동화의 효율성과 생산성 향상에 기여할 수 있음을 증명하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권5호
• /
• pp.428-436
• /
• 2008

For Longevity of implant, considerations of biomechanical and microbiological aspects must be done. Recently, due to the remarkable development of bone grafting procedure. Implant has been implanted into the more favorable sites but peri-implantitis resulted from periodontal bacteria may obscure the long-term prognosis. Although many different modalities have been introduced to treat the failed implant. Implant's surface and irreversible bony destruction around the implant prevents good result. After Er,Cr:YSGG (waterlase) laser using the wave-length of 2780nm has been introduced to dental field, good results have been reported. Because waterlase uses the hydrokinetic force of water. It is excellent device to detoxify the implant surface mechanically without the heat generation and damage to the implant surface. We designed to evaluate waterlase effect on the peri-implantitis has been occurred after implantation. Four beagle dogs were involved. We have made four premolar extraction in each right and left side of the lower jaw and placed two implants in the anterior of the jaw as a control and six implant were placed posterior in each socket after extraction immediately as an experimental group. We tied floss-silk in each implant to make peri-implantitis intentionally. After three months, we explored peri-implant sites on each experimental fixtures. Using waterlase laser irradiation was performed on that implantitis sites under 3W, air 30% and water 20% intensity for 2 minutes. In control group, we repositioned the flap to cover the exposed fixture without any supportive care. Three months later, we sacrificed experimental animals and extracted and preparated bone blocks with Donath and Breuner (982), Donath (988)'s methods and examined under microscope. We have obtained good re-osseointegration around fixtures after treating with waterlaser irradiation. But it was shown fibroosseointegration in the control group.

• 복식문화연구
• /
• 제15권2호
• /
• pp.352-367
• /
• 2007

Viktor and Rolf, despite their short career in the field, has been continuously giving a fresh impact on fashion design by grafting a surrealistic approach to their design works. As a basis of this study, we review the features of surrealistic drawing and the surrealistic features expressed in surrealistic clothes. The purpose of this study is to analyze the surrealistic features detected in the clothes designed by Viktor and Rolf on the basis of the above standard and review and predict the future trend in fashion. As for the research method, we review the previous researches and analyze the drawing works by some representative surrealistic artists, in particular, Schiaparelli's clothes in the 1930s, the clothes of surrealistic trend since 2000, and Viktor & Rolf's clothes. The result of the analysis is as follows. The surrealistic features of Viktor & Rolf clothes can be found in the movement of natural objects, the movement of everyday materials, the movement of clothing items, and visual illusion on clothes. As a whole, the surrealistic features clearly stood out in their clothes. High technology will rapidly change the modern society and we humans are likely to resort to something fresh or different as our emotion and feelings are getting tired and weary. Something that stimulates our feeling and emotion hidden behind our reason or logic will be reflected in design far more than something complex and functional. For this reason, as it reveals human imagination inherently, surrealism is expected to establish itself as a mega trend in the future.

• 한국응용곤충학회지
• /
• 제19권2호
• /
• pp.67-72
• /
• 1980

우리나라에 발병하고 있는 생강모자이크 바이러스병의 기생범위, 물리화학적 성질, 혈청검정 및 전자현미경적 관찰을 조사하였다. 생강의 초기병징은 황록반문을 일으키고 후기에는 위축현상 및 괴경의 소구화를 이룬다. 포장이병율은 약 $43\%$이었다. 즙액전염, 접구전염(core grafting)이 이루어지며, 동부, 오이 Chenopodium amaranticolar, N. tabaccum var. Havana를 비롯하여 23종의 CMV감수성 식물에 병증을 나타낸다. 희석한계점은 $10^{-4}\~10^{-5}$ 범위이고, 온도한계활성점는 $65\~70^{\circ}C$사이이다. 혈청반응은 CMV 항혈청과 양성으로 나타난다. 전자현미경에 의한 바이러스립자의 크기는 $28\~32m\mu$의 구형이다. 이병엽육조직의 세포질 속에는 구형바이러스입자의 밀집상과 유리되어 있는 입자도 관찰되었다. 이상을 종합하여 볼 때 생강에 모자이크병을 일으키는 바이러스는 CMV군에 속하는 바이러스로 믿어진다.

• 복식
• /
• 제66권7호
• /
• pp.124-138
• /
• 2016

The present study observes collaboration methods in which 3D printing was a part of the fashion manufacturing process, expression methods of such cases, and their ripple effects. As a result, the three types of collaborations between fashion designers and other industry fields, fashion brands and 3D printing companies, and fashion designers and artists. Case analysis results and ripple effects found according to each collaboration method were as follows. First, in collaborations found were between fashion designers and other industry fields, 3D printed fashion works with futuristic images were seen through the fusion of future industries, which claim to support cutting edge digital technology, and creative fashion design. As they were mainly collaborations between automobile industries with cutting edge images or digital related industries and fashion designers, they were expressed as a new form of experimental clothing, and were used as strategies to improve future corporate images of the high tech industry. Second, in collaborations between fashion brands and 3D printing technology businesses, the sporting good brands and the shoe industry attempted to let their products be known through the promotion of functional material or ergonomic technology. While they emphasize practicality by mainly using flexible material, they were mainly proposed as functional sporting goods for famous players or as shoe accessories, so methods are still used for public distribution as brand promoting marketing strategies. Third, with collaborations between fashion designers and artists, creative pieces were shown through the grafting of 3D printing technology, the artistry of artists, and the experimentation of fashion designers. In particular, the innovative value of fashion as art was created through the union of the artistic 3D modeling technology support of artists and the creativity of designers. Like this, 3D printing fashion can graft the cutting edge nature of fashion to other industry fields through collaborations, enhancing pacesetting images, and in the fashion field, it can improve possibilities for innovations in the fashion industry through the support of 3D printing technology businesses and artists, raising expectations towards future human living.