• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1667-1669
• /
• 2004

In this paper, the elastic epoxy added elastomer having viscoelasticity to existing epoxy was measured thermal, structural properties by DSC (Differential Scanning Calorimetry) and FESEM (Field Emission Scanning Electron Microscope). Specimens were made of dumbbell forms by the ratio of 5, 10, 15, and 20[phr] by regulation with elastomer contents. The measurement temperature dimensions of DSC were -20[$^{\circ}C$] to 150[$^{\circ}C$] and rising temperature was 4[$^{\circ}C$/min]. Also we observed structure through FESEM at the magnification of 1000 times with the voltage of 15[kV] after breaking by quenching specimens. As experimental results, we could know that thermal and structural properties were improved quantity according to decrease of elastomer contents. Namely, it increased glass transition temperature, high temperature, and matrix structure. In general, thermal, structural properties of 15[phr] was excellent among the specimens.

• 한국전기전자재료학회논문지
• /
• 제19권7호
• /
• pp.631-635
• /
• 2006

The properties of metal interlayered DLC films between the Si substrate and the DLC films were studied. DC magnetron sputtering method has been used to deposit intermediate layers of metals. And RF-PECVD method has been employed to synthesize DLC onto substrates of the silicon and metal layers. After we used metal Inter-layers, such as chromium, nickel, titanium and we studied tribological properties of the DLC films. The thickness of films were observed by field emission scanning electron microscope (FE-SEM). Also the surface morphology of the films were observed by an atomic force microscope (AFM). The crystallographic properties of the films were analyzed with X-ray diffraction (XRD), the friction coefficients were investigated by AFM in friction force microscope (FFM) mode. Tribological performances of the films were estimated by nano-indenter, stress tester measurement.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1059-1064
• /
• 2003

This paper presents an overview of the mechanical properties of carbon nanotubes. The characteristics of carbon nanotubes were briefly introduced. We then present briefly the experimental techniques used to measure mechanical properties and the results obtained by other researchers. A carbon nanotube is too small to be pulled apart with standard tension devices. Manipulators should be used for mechanical testing. We introduced manipulation methods using nanomanipulators under field-emission scanning-electron microscope.

• 한국표면공학회지
• /
• 제54권2호
• /
• pp.96-101
• /
• 2021

NaNbO₃:Eu³⁺ phosphor thin films were grown on quartz substrates by radio-frequency magnetron sputtering at a growth temperature of 100 ℃, with subsequent annealing at temperatures of 800, 900, and 1000 ℃. The effects of annealing temperature on the structural, morphological, and optical properties of the thin films were investigated. The NaNbO₃:Eu³⁺ sputtering target was synthesized by a solid-state reaction of raw materials Na₂CO₃, Nb₂O₅, and Eu₂O₃. The X-ray diffraction patterns exhibited that the thin films had two mixed phases of NaNbO₃ and Eu₂O₃. Surface morphologies were investigated by using field emission-scanning electron microscopy and indicated that the grains of the thin film annealed at 1000 ℃ showed irregular shapes with an average size of approximately 300 nm. The excitation spectra of Eu³⁺-doped NaNbO₃ thin film consisted of a strong charge transfer band centered at 304 nm in the range of 240-350 nm and two weak peaks at 395 and 462 nm, respectively, resulting from the ⁷F₀→⁵L₆ and ⁷F₀→⁵H₂ transitions of Eu³⁺ ions. The emission spectra under excitation at 304 nm exhibited an intense red band centered at 614 nm and two weak bands at 592 and 681 nm. As the annealing temperature increased from 800 ℃ to 1000 ℃, the intensities of all the emission bands and the band gap energies gradually increased. These results indicate that the higher annealing temperature enhance the luminescent properties of NaNbO₃:Eu³⁺ thin films.

• 한국환경농학회지
• /
• 제38권4호
• /
• pp.245-253
• /
• 2019

BACKGROUND: Weathering of bottom ash (BA) might induce change of its surface texture and pH and affect physical and chemical properties of soil associated with greenhouse gas emission, when it is applied to the arable soil. This study was conducted to determine effect of weathering of BA in mitigating emission of greenhouse gases from upland soil. METHODS AND RESULTS: In a field experiment, methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O) emitted from the soil was periodically monitored using closed chamber. Three month-weathered BA and non-weathered BA were applied to an upland soil at the rates of 0, 200 Mg ha^-1. Maize (Zea mays L.) was grown from July 1_st to Oct 8_th in 2018. Both BAs did not affect cumulative CH₄ emission. Cumulative CO₂ emission were 23.1, 19.8, and 18.8 Mg/ha/100days and cumulative N₂O emission were 35.8, 20.9, and 17.7 kg/ha/100days for the control, non-weathered BA, and weathered BA, respectively. Weathering of BA did not decrease emission of greenhouse gases significantly, compared to the weathered BA in this study. In addition, both BAs did not decrease biomass yields of maize. CONCLUSION: BA might be a good soil amendment to mitigate emissions of CO₂ and N₂O from arable soil without adverse effect on crop productivity.

• 한국진공학회지
• /
• 제17권2호
• /
• pp.90-95
• /
• 2008

본 연구에서는 열 및 불산을 이용한 후처리 공정이 레지스트층을 이용하여 제작된 탄소나노튜브의 전자 방출 특성에 미치는 영향에 대하여 연구하였다. 전자 방출 전류는 초기에 $8V/{\mu}m$의 전계에서 $4.2{\mu}A/cm^2$의 전류에서 열 및 불산 처리 시 각각 $7.5mA/cm^2$ 및 $79mA/cm^2$로 향상되었다. 하지만 열 및 불산 처리를 동시에 실시한 경우 전류 밀도는 $426mA/cm^2$ 및 $656mA/cm^2$로 향상된 전자 방출 특성을 얻을 수 있었다. 전자 방출 특성은 처리 순서에 따라 증가하는 양이 다르게 나타났으며, 가장 우수한 전자 방출 특성은 열 처리를 먼저 시행 후, 불산 처리를 하는 공정에서 나타났다. 이는 열 처리에 의한 탄소나노튜브의 결정성의 증가와 이후 불산 처리에 의한 불소 결합의 증가에 기인함을 알 수 있었다. 강한 불소 결합은 탄소나노튜브 에미터의 전자 방출 특성의 향상에 크게 기여를 하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• 한국진공학회지
• /
• 제14권4호
• /
• pp.258-262
• /
• 2005

본 연구는 실리콘 질화막 박막을 덮개층으로 사용하여 탄소나노튜브를 성장하고, 성장된 나노튜브의 전자방출특성을 조사하였다. 탄소 나노튜브는 triode PE-CVD 장치에 의해 성장되었으며, 탄소나노튜브의 밀도는 실리콘 질화막의 두께에 따라 크게 변하였다. 탄소 나노튜브의 밀도가 $10^{4}$/$cm^{2}$에서 전자방출 특성이 가장 우수하였으며, 이때 전자방출특성은 문턱전계 1.2 V/$\mu$m, 전류밀도는 3.6 V/$\mu$n의 전기장에서 0.17 mA/$cm^{2}$으로 측정 되었다. 또한, 진공 챔버에서 질소($N_{2}$) 분위기 하에서 전자방출 안정성을 조사하였으며, 탄소나노튜브의 밀도가 감소함에 따라 전자방출 안정성이 향상되었고, 탄소나노튜브의 밀도가 $10^{4}$/$cm^{2}$ 인 경우 $1\times10^{-4}$ A/$cm^{2}$ 이상의 전류가 흐르는 특성을 보였으며, 이 경우 $1\times$$10^{-5}$ Torr의 압력하에서 방출 전류의 안정도는 최소인 $2\%$를 유지하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.527-530
• /
• 2001

In this paper, the basic characteristics of flat fluorescent lamp using ultraviolet generate from gas discharge and powder type electrolyminescent display(P-ELD) using a phenomenon of the light emission eaused by the electrical field applied to phosphor are studied. The lamp is a simple structure with insulator layer, phosphor layer, and gas gap. Current(displacement current + discharge current) in flat fluorescent lamp using.

• 천문학회보
• /
• 제36권2호
• /
• pp.66.1-66.1
• /
• 2011

E+A galaxies are interpreted as post-starburst systems because of strong Balmer absorption lines but any emission lines indicating the lack of current star formation activities, thus they are one of key populations for understanding how star formation activities evolve in galaxies. We present mid-infrared (MIR) spectral energy distributions of E+A galaxies using the Wide-field Infrared Survey Explorer (WISE) preliminary released data. Furthermore, we investigate the role of environment with respect to the MIR properties of E+A galaxies.