• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.475-478
• /
• 2007

A solution for carbon nanotube based field emission displays has been designed and built. The solution makes use of structure layout to control electron beam trajectories, uniformity by use of ballasting, emission anomalies eliminated by selective carbon nanotube growth and invisible spacers to maintain the vacuum gap.

• Journal of the Korean Vacuum Society
• /
• v.7 no.s1
• /
• pp.134-139
• /
• 1998

Amorphous fluorocarbon (a-C:F) is of interest for low dielectric interlayer material, but in this work we applied this material to FED field emitter. N-doped a-C:F films were deposited by inductively coupled plasma chemical vapor deposition (ICPCVD). The Raman spectra were measured to study the film structure and inter-band optical absorption coefficients were measured using Perkin-Elmer UV-VIS-IR spectrophotometer and optical band gap was obtained using Tauc's plot. XPS spectrum and AFM image were investigated to study bond structure and surface morphology. Current-electric field(I-E) characteristic of the film was measured for the characterization of electron emission properties. The optimum doping concentration was found to be [N2]/[CF4]=9% in the gas phase. The turn-on field and the emission current density at $[N_2]/[CF_4]$=9% were found to be 7.34V/$\mu\textrm{m}$ and 16 $\mu\textrm{A}/\textrm{cm}^2$ at 12.8V/$\mu\textrm{m}$, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.309-312
• /
• 2002

Triode field emitters with planar-carbon-nanopaticle (CNP) cathodes were successfully fabricated using the conventional photolithography and the hotfilament chemical vapor deposition. Electron emission from a CNP triode emitter with a 12-${\mu}m$-diameter gate hole started at the gate voltage of 45 V, and the anode current reached the level of ${\sim}120$ nA at the gate voltage of 60 V, respectively. For the quantitative analysis of the Fowler-Nordheim (F-N) type emission from a CNP triode emitter, we carried out 2dimensional numerical calculation of electrostatic potential using the finite element method. As it turned out, a radial variation of electric field was very important to account for the emission from a planar emitting layer. By assuming the graphitic work function of 5 eV for CNPs, we were able to extract a consistent set of F-N parameters, together with the radial position of emitting sites.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.8
• /
• pp.713-719
• /
• 2002

In this study, the vertically well-aligned CNTs were synthesized by DC bias-assisted inductively coupled plasma hot-filament chemical vapor deposition (ICPHFCVD) using radio-frequence plasma of high density and that CNTs were vertically grown on Ni(300 )/Cr(200 )-deposited glass substrates at 58$0^{\circ}C$. This system(ICPHFCVD) added to tungsten filament in order to get thermal decompound and DC bias in order to vertically grow to general Inductively Coupled Plasma CVD. The grown CNTs by ICPHFCVD were developed to higher graphitization and fewer field emission properties than those by general ICPCVD. In this system, DC bias was effect of vortical alignment to growing CNTs. The measured turn-on fields of field emission property by general ICPCVD and DC bias-assisted ICPHFCVD were 5 V/${\mu}{\textrm}{m}$ and 3 V/${\mu}{\textrm}{m}$, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1003-1007
• /
• 2005

We demonstrate color video displays driven by carbon nanotube electron field emitters. These nanotubes are incorporated into the device by selective growth using low temperature chemical vapor deposition. The device structure is simple and inexpensive to fabricate, and a 45 V switching voltage enables the use of low cost driver electronics. The prototype units are sealed 4.6” diagonal displays with 726 um pixels. They represent a piece of a 42” diagonal 1280x720 high definition television. The carbon nanotube growth process is performed as the last processing step and creates nanotubes ready for field emission. No activation post-processing steps are required, so chemical and particulate contamination is not introduced. Control of the nanotube dimension, orientation, and spatial distribution during growth enables uniform, highquality, color video performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.10
• /
• pp.850-854
• /
• 2001

In this study, carbon nanotubes was vertically grown pm Ni/Cr-deposited glass substrates by Inductively Coupled Plasma Chemical Vapor Deposition. Using Radio-Frequence(RF) plasma below temperature of 600$^{\circ}C$. The grown CNTs shows field emission properties and high quality materials. Turn-on fields and current density showed 5V/${\mu}$m and 1.06${\times}$10$\^$-6/ A/$\textrm{cm}^2$, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.447-453
• /
• 2016

The reduction technologies of exhaust gas from both the off-road engine and on-road vehicles are important. It is possible to apply various combustion technologies with engines after the application of a treatment technology to this field. In this study, main injection timing, pilot injection timing, and exhaust gas recirculation (EGR) rate were selected as the experimental parameters whose effects on the emission of exhaust gases and on the fuel consumption characteristics were to be determined. In the experiment, the emission of nitrogen oxide (NOx) and Smoke, and the Torque at the same fuel consumption level, were measured. The experimental data were analyzed using the Taguchi method with an L9 orthogonal array. Additionally, analysis of variation (ANOVA) was used to confirm the influence of each parameter. Consequently, the level of each parameter was selected based on the signal-to-noise ratio data (main injection timing, 3; pilot injection timing, 3; EGR rate, 2), and the results of the Taguchi prediction were verified experimentally (error: NOx, 10.3 %; Smoke, 6.6 %; brake-specific fuel consumption (BSFC), 0.6 %).

• Journal of Photoscience
• /
• v.7 no.1
• /
• pp.21-26
• /
• 2000

The photoemission and excitation spectra of cis-[Cr(cyclam)F$_2$]ClO$_4$ (cyclam = 1,4,8,11-tetraazacy-clotetradecane) taken at 77 K are reported. The 298 K mid- and far-infrared spectra are also measured. The vibrational intervals of the electronic ground state are extracted from the far-infrared and emission spectra. The ten electronic bands due to spin-allowed and spin-forbidden transitions are assigned. The zero-phonon line In the excitation spectrum splits into two components by 169 cm$^{1}$, and the large $^2$E$_{g}$ splitting can be reproduced by the ligand field theory. According to the ligand field analysis, we can confirm that nitrogen atoms of the cyclam ligand have a strong c-donor character, and fluoride ligand also has strong $\sigma$- and $\pi$-donor properties toward chromium(III) ion.n.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.359-359
• /
• 2012

Trivalent rare-earth ($RE^{3+}=Eu^{3+}\;and\;Tb^{3+}$) ions activated $CaGd_4O_7$ phosphors were synthesized by a sol-gel process. After annealing at $1,500^{\circ}C$, the XRD patterns of the phosphor confirmed their monoclinic structure. The photoluminescence excitation spectra of $Eu^{3+}$ and $Tb^{3+}$ doped $CaGd_4O_7$ phosphor shows the broad-band excitations in the shorter wavelength region due to charge transfer band of completely filled $O^{2-}$ to the partially filled $Eu^{3+}$ ions and f-d transitions of $Tb^{3+}$ ions, respectively. The photoluminescence spectra show that the reddish-orange ions and green emission for $Eu^{3+}$ and $Tb^{3+}$ ions, respectively. Owing to the importance of thermal quenching property in the technological parameters, the temperature-dependent luminescence properties of these phosphors were measured for examing the suitability of their applications in the development of light emitting diodes (LEDs). In addition to those measurements, the cathodoluminescence properties were examined by changing the acceleration voltage and filament current. The calculated chromaticity coordinates of these phosphors were close proximity to those of commercially available phosphors for LED and field emission display devices.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.299-311
• /
• 2011

The objective of this paper is to present a methodology for the classification of spatial patterns considering the parameters of urban form which play a significant role in the formation of the urban climate. The urban morphological parameters, i.e. building coverage, impervious pavement, vegetation, water, farmland and landuse types were used to classify the spatial patterns by a K-means cluster analysis. And the presented methodology was applied on Changwon city, South Korea. According to the results of cluster analysis, the total spatial patterns were classified as 24 patterns. First of all, The spatial patterns(A-1, A-2, A-3, B-1, B-2, B-3, C-1, C-2, C-3, D-1, D-2, D-3, E-1, E-2, E-3, F-1, F-2, F-3, G-1, G-2, G-3), which distributed in the rural area and the suburban area, can have the positive impacts of cold air generation and wind corridor on an urban climate environment, were distributed in the rural area. On the other hand, the spatial patterns of the downtown area including A-4, B-4, C-4 and D-4 are expected to have the negative impacts on urban climate owing to the of artificial heat emission or the wind flow obstruction. Finally, it will require the future research to analysis the climatic properties according to the same spatial patterns by the field survey.