• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.7-11
• /
• 2017

In this study, we develop the exact field of mode I in an infinitely deep crack in a half-plane. Using this field, we obtain the exact stress intensity factor $K_{I}$. From the tractions on the crack faces induced by exact field, we calculate the stress intensity factor of this field. We compare the results with the stress intensity factor calculated using Bueckner's weight function formula and that calculated by using Tada's formula listed in "The Stress Analysis of Cracks Handbook" It was found that Bueckner's formula yields accurate results. However, the results obtained using Tada's formula exhibit inaccurate behavior.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2158-2167
• /
• 2018

This paper analyzed the magnetic field produced by the cylindrical stator coils of permanent magnet spherical motor (PMSM). The elliptic equations about the vector magnetic potential were given. Given that the eddy current effects are neglected, the magnet field of the PMSM is regarded as irrotational field, which can be calculated by scalar magnetic potential. The current density of cylindrical stator coil was proposed based on the definition of current density. The expression of current density of stator coil was obtained according to the double Fourier series decomposition and spherical harmonic functions. Then the magnetic flux density for scalar magnetic potential was derived. Further, the influence of different parameters on radial flux density was also analyzed. Finally, the results by the analytical method in this paper were validated by finite element analysis (FEA).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.35-42
• /
• 2010

We use conformal mapping method to derive the analytical expressions for calculating electrostatic fields and electric potentials surrounding the conductor-backed coupled coplanar waveguide(CBCCPW) structure. Using the derived expressions, the electrostatic fields and potentials are computed at various points of the CBCCPW's geometry and the field and potential distributions are analyzed. The proposed method provides a faster and simpler calculation of the field distributions than the full-wave analysis method because no iterations are required. This method can be widely applied to the analysis of microwave integrated circuits using coupled line, such as coupler, filter, and microstrip antenna.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.70-81
• /
• 1999

To predict the viscous boundary layers and wakes around a ship, the CFD techniques are commonly used. For the efficient application of CFD tools to practical hull farms, a 3-D field grid generating system is developed. The present grid generating system utilizes the solution of Poisson equation. Sorenson's method developed for 2-D is extended into 3-D to provide the forcing functions controling grid interval and orthogonality on hull surface, etc. The weighting function scheme is used for the discretization of the Poisson equation and the linear equations are solved by using MSIP salver. The trans-finite interpolation is also employed to assure the smooth transition into boundary surface grids. To rove the applicability, the field grid systems around a container ship and a VLCC with bow and stem bulb are illustrated, and the procedures for generating 3-D field grid system are explained.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.107-114
• /
• 1996

Monte carlo method is especially a useful method for the analysis of thermal noise of semiconductor devices since the time dependence of microscopic details is simulated directly. Recently, a mthod for the calculation of the instantaneous currents of 2-dimensional devices, which is numerically more accurate than the conventional method, has been proposed using the generalized ramo-shockley theorem. Using this mehtod we investage the validity of the existing thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise theories of field-effect transistors. First, the 1-dimensional analysis of thermal noise using ramo-shockley theorem is shown to be applicable to 2 dimensional devices if the frequency of interest is low enough. The correlation between electrons in different regions of th echannel is shown not to be negligible. And we also obtian the spatial map of the noise in the channel region. By doing so, we show that the steady state nyquist theorem is the correct theory rather than the theory by van der ziel et.al.

• Smart Structures and Systems
• /
• v.25 no.5
• /
• pp.631-641
• /
• 2020

To meet the urgent requirements of safety surveillance from civil engineering management authorities, this study proposes a refined and efficient approach to generate full-field high-resolution panorama of construction sites using camera-amounted UAV (Unmanned Aerial Vehicle). GPS (Global Position System) information extraction for pre-registration, feature points filtering for efficient registration and optimal seaming line seeking for fusion are performed in sequence to form the full-field panorama generation framework. Advantages of the proposed method are as follows. First, GPS information can sort images for pre-registration, avoiding inefficient repeated pairwise calculations and matching. Second, the feature points are filtered according to the characteristics of the construction site images to reduce the amount of calculation. The proposed framework is validated on a road construction site and results demonstrate that it can generate an accurate and high-quality full-site panorama for the safety supervision in a much efficient manner.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.176-183
• /
• 2003

This paper presents a neural network based approach to disseminating information relating to experimental and field observations in engineering. Although the methodology is generic and can be applied to many areas of engineering science, attention is focussed here solely on geotechnical engineering applications. Field data relating to the settlement of foundations presented by Burland and Burbidge (1985) which led to their well known equation for calculation of settlement, now included in most text books, is re-visited. A part of the data, chosen randomly, is used to train an Artificial Neural Network (ANN), which relates foundation settlement to various causes as identified by the authors. Predictions are made for situations for which data were not used in training. These indicate sufficient accuracy when compared to the original field data. Accuracy of predictions is further improved when all the data are included in the training set. The finally trained ANN is shown to represent these data more accurately than the Burland and Burbidge equation. Based on the above heuristic example, an ANN is presented as an alternative to developing equations and design rules in geotechnical engineering practice. Significant advantages are shown to arise by using this methodology. Ease of updating the ANN, as and when additional data becomes available, being the most important one. Loss of transparency, however, seems to be the main disadvantage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.309-312
• /
• 2002

Triode field emitters with planar-carbon-nanopaticle (CNP) cathodes were successfully fabricated using the conventional photolithography and the hotfilament chemical vapor deposition. Electron emission from a CNP triode emitter with a 12-${\mu}m$-diameter gate hole started at the gate voltage of 45 V, and the anode current reached the level of ${\sim}120$ nA at the gate voltage of 60 V, respectively. For the quantitative analysis of the Fowler-Nordheim (F-N) type emission from a CNP triode emitter, we carried out 2dimensional numerical calculation of electrostatic potential using the finite element method. As it turned out, a radial variation of electric field was very important to account for the emission from a planar emitting layer. By assuming the graphitic work function of 5 eV for CNPs, we were able to extract a consistent set of F-N parameters, together with the radial position of emitting sites.

• Progress in Superconductivity
• /
• v.8 no.2
• /
• pp.169-174
• /
• 2007

We measured the field profiles, H(x)'s of coated conductors by using scanning Hall probe method when various magnetic fields, $H{_\alpha}'s$ or currents, I's were applied. From the measured field profiles, we calculated the current profiles, J(x)'s by the inversion method. The calculated J(x)'s of coated conductors show some different properties from the standard critical state model. $J{_c}'s$ are inhomogeneous varying with the positions and are not constant when $H_{\alpha}$ or I changes. And when I decreases the features of current reversion are remarkably different from the model.

• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.419-425
• /
• 2008

In previous study, it was reported that the anomalous skin effect should be considered in the low pressure condition(<10 mTorr). However there is the problem that the filament type antenna model of which size is 0 makes the non-physical phenomena that the electric field at the antenna point is infinite. Therefore, in this work, using the surface current model the electric field in antenna region is calculated and compared with the case of filament type antenna model in various conditions.