• 제목/요약/키워드: field calculation

검색결과 1,796건 처리시간 0.023초

Theoretical Calculation of Zero Field Splitting of $Mn^{2+}$ Ion in $LiTaO_3$Crystal

  • Yeom, T.H;Lee, S.H
    • Journal of Magnetics
    • /
    • 제6권3호
    • /
    • pp.77-79
    • /
    • 2001
  • The semi-empirical superposition model has been applied to calculate the zero field splitting parameters of $Mn^{2+}$ion in $LiTaO_3$ single crystal, assuming that $Mn^{2+}$ion occupies one of two possible sites: $Li^{l+} \;or\; Ta^{5+}$ site, respectively. The 2nd-order axial zero field splitting parameters are $958\times10^{-4}cm^{-1}\; at\; Li^{1+}$ site and $193\times 10^{-4}cm^{-1} \;at\; Ta^{5+}$ site for $Mn^{2+}$ions. The 4th-order zero field splitting parameters at $Li^{l+} \;and\; Ta^{5+}$ sites are also determined. These calculated zero field splitting parameters are very important to determine the substitutional sites of doped impurity ions in $LiTaO_3$ crystal.

  • PDF

유휴농지 농업적 활용 평가지표 설정 및 현장적용 (Establishing Evaluation Indicator for Agricultural Utilization of Idle Farmlands and Field Application)

  • 김경찬;박창원;조석호;최진규;윤성수;손용훈
    • 농촌계획
    • /
    • 제20권2호
    • /
    • pp.127-137
    • /
    • 2014
  • Self-sufficiency rate of food in South Korea is almost at the lowest level among OECD countries, and the decrease tend of farmland is expected to be continued. In this situation, the government has been revised the target self-sufficiency rate of food, and carried forward various policies in order to achieve it. One of those policies is the restoration business of idle farmland which is planned to carry forward after 2015. This study set up indicators evaluating effective use of idle farmland, and tried to apply in the field before carrying forward restoration business. The result of this study may be summarized as follows. First of all, it reset an evaluation indicator that was based on the evaluation indicator developed in order to set application directions of idle farmland. Next, it selected 30 idle farmlands with reset evaluation indicator among 11,635 which were inspected nationwide in 2012. Before applying indicator, it measured the condition of recycling such as accessibility of farmland, condition of irrigation and drainage system, land state, and surroundings by field investigation. Then, it calculated composite score in each target area through applying indicators, and verified the indicator by comparing calculated result with the one which was decided from field investigation. Finally, it carried out field investigation, correct and upgrade some problems of the standard of score calculation that was found during applying previously set evaluation indicator to target area, and established the final standard of calculation for evaluation indicator.

C형 CIP법을 이용한 3차원 음장해석 (The Three-Dimensional Acoustic Field Analysis using the Type C CIP Method)

  • 이채봉;오성관
    • 한국전자통신학회논문지
    • /
    • 제5권2호
    • /
    • pp.125-132
    • /
    • 2010
  • 본 연구는 C형 CIP법을 이용한 3차원 시간영역 음장해석법의 정밀도에 대해서 세밀한 검토를 하였다. 3차원 C형 CIP 음장해석의 위상오차 특성과 전파방향에 따른 오차를 명확히 하고, 본 수치 해석법의 유효성을 나타내었다. 또 종래의 수치해석법으로 staggered-grid 모델을 이용한 FDTD법에 따른 계산결과와 M형 CIP법에 의한 계산결과와 비교를 하였다. 본 논문의 검토에 의해 같은 이산화조건에서는 C형 CIP법은 M형 CIP법 및 FDTD법보다 해석법이 가진 분산성이 적고, C형 CIP법으로 계산된 음압 파형은 변형이 적은 결과가 되는 것을 알 수 있었다. 그리고 C-1형 CIP법, C-2형 CIP법, M형 CIP법 및 FDTD법의 메모리와 계산시간을 비교하였다. 그 결과 C형 CIP해석은 FDTD해석에 비하여 수치분산성이 적지만 많은 사용 메모리와 계산시간이 필요하였다. C-1형 과 C-2형 CIP법은 입방체의 격자 대각 방향에서는 축 방향에 비하여 정밀도가 약간 저하하는 것을 알 수 있었다. 그리고 C-2형 CIP법은 C-1형 CIP법보다 사용 메모리와 계산시간이 적고, 계산정밀도도 고려해서 보면 유효한 해석법이라는 것이 명확하였다.

상세 공간단위 농업분야 온실가스 배출량 산정 방안 연구 (Estimating GHG Emissions from Agriculture at Detailed Spatial-scale in Geographical Unit)

  • 김솔희;전혜진;최지연;서일환;전정배;김태곤
    • 한국농공학회논문집
    • /
    • 제65권5호
    • /
    • pp.69-80
    • /
    • 2023
  • Carbon neutrality in agriculture can be derived from systematic GHG reduction policies based on quantitative environmental impact analysis of GHG-emitting activities. This study is to explore how to advance the calculation of carbon emissions from agricultural activities to the detailed spatial level to a spatial Tier 3 level (Tier 2.5 level), methodologically beyond the Tier 2 approach. To estimate the GHG emissions beyond the Tier 2.5 level by region for detailed spatial units, we constructed available activity data on carbon emission impact factors such as rice cultivation, agricultural land use, and livestock. We also built and verified detailed data on emission activities at the field level through field surveys. The GHG emissions were estimated by applying the latest national emission factors and regional emission factors according to the IPCC 2019 GL based on the field-level activity data. This study has significance that it explored ways to build activity data and calculate GHG emissions through statistical data and field surveys based on parcels, one of the smallest spatial units for regional carbon reduction strategies. It is expected that by utilizing the activity data surveyed for each field and the emission factor considering the activity characteristics, it will be possible to improve the accuracy of GHG emission calculation and quantitatively evaluate the effect of applying reduction policies.

현장계측결과를 이용한 강거더교의 확률적 저항모델 (Probability Based Resistance Model of Steel Girder Bridges Based on Field Testing)

  • 엄준식
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제12권4호
    • /
    • pp.195-202
    • /
    • 2008
  • 현존하는 교량의 실제적인 거동에 대한 보다 정확한 예측방법의 개발은 보수보강이 필요한 교량에 예산이 집중될 수 있도록 하여 교량운영의 경제성 및 안전성 측면에서 매우 중요하다. 특히 교량의 형태와 설치 지역의 활하중의 특성을 고려하며 활하중에 교량이 반응하는 실제적인 거동을 파악하여 실제적인 교량의 내하력 평가 이외에도 평가대상 교량의 선정 및 평가의 우선순위를 결정하여 교량의 유지 보수에 사용되는 예산의 보다 효율적인 집행을 가능하게 할 수 있다. 이 연구에서는 교량 현장실험에서 얻어지는 결과를 신뢰성 해석에 반영하여 보다 실제적인 교량 안전성 평가의 방법론을 연구하였다. 17개의 강거더 교량에 대해 기존의 교량 실험 결과를 토대로 교량의 내하력을 평가하기 위하여 2단계의 신뢰성 해석을 수행하였다. 우선 대상교량에 대해 설계에 사용된 계수 및 공칭강도를 이용하여 신뢰성 해석을 수행하였으며 2단계 신뢰성 해석에서는 교량 실험 결과를 신뢰성 해석에 포함하였다. 해석 결과를 비교해 본 결과 교량실험을 통한 각종 구조적 계수의 불확실성 제거를 통해 교량의 안전성을 저해하지 않고도 대상 교량의 신뢰성이 대폭 증가하는 결과를 얻을 수 있었다.

도로선형의 결정에서 토공량 산정에 관한 연구 (A Study on the Earth-work Volume Calculation for Route Alignment of Highway)

  • 최재화;이석배;심정민
    • 한국측량학회지
    • /
    • 제11권2호
    • /
    • pp.89-100
    • /
    • 1993
  • 본 연구는 CAD와 LISP(LIST Processing)을 이용한 도로노선 결정에 있어서의 토공량 산정에 관한 연구이다. 컴퓨터의 비약적인 발전과 산업분야에서의 이용증대는 CAD/CAM/CAE 기술의 발전으로 이어져 자동설계 및 자동제작을 가능케 하고 있으며 또한 토목설계의 자동화도 꾸준히 추진되어 오고 있는 실정이다. 이러한 자동화 작업의 일환으로 본 연구에서는 도로노선 결정시 각 노선의 토공량 산정을 자동화하여 토목설계업무의 효율성을 높이고자 하였다. 연구의 방법으로 지형도에 DTM(Digital Terrain Model) 개념을 도입하여 지형정보를 자동독취할 수 있도록 프로그램화 한 후 이 데이타를 가지고 LISP 언어를 이용하여 체계적인 알고리즘을 만든 후 CAD 시스템과 접목시켜 종·횡단 면적과 토공량을 산정해서 유토곡선을 출력하는 자동설계 시스템을 시험적으로 구축하는 데 그 목적을 두고 있다.

  • PDF

Study on Settlement Calculation of the Long-Short Pile Composite Foundation

  • XU, Xin;Kwag, Yunehyeong;Chun, Byungsik
    • 한국지반환경공학회 논문집
    • /
    • 제14권7호
    • /
    • pp.13-18
    • /
    • 2013
  • As a new foundation treatment technology, long-short pile composite's design theory is still in primary phase, and there are no explicit settlement calculation methods in active codes. So it is necessary to study the working mechanism and the methods of settlement calculation. In this paper, the mechanics of long-short pile composite foundation are fully discussed. Meanwhile, based on the shear deformation method, the Mylonakis & Gazetas models about mutual action between two piles and the one between pile and soil are introduced, Considering the performance of cushion, the flexible factors of mutual actions are provided. Then the settlement calculation of long-short pile composite foundation which can consider the mutual actions between pile, soil and cap is deduced, and the correlated program is also developed. Finally, an engineering example is discussed with the method. A comparison shows that calculated results and measured data from a field test pile are in a good agreement, indicating that the presented approach is feasible and applicable in engineering practice.

폭발하중에 대한 지하공동구조체의 3차원 공적 유한요소해석 (Three-Dimensional Dynamic Analysis of Underground Openings Subjected to Explosive Loadings)

  • 김선훈;김진웅;김광진
    • 전산구조공학
    • /
    • 제10권2호
    • /
    • pp.171-178
    • /
    • 1997
  • 본 연구에서는 발파로 인한 폭발하중에 대한 지하공동구조체의 3차원 동적유한요소해석을 수행하였다. 해석과정은 1차원 근원해석과정과 3차원터널해석과정의 2단계로 나누어 수행하였다. 1차원 근원해석에서는 장약공과 그 주변의 자유장을 포함하는 해석으로서 3차원 터널해석을 위한 입력하중의 계산작업을 수행한다. 본 연구에서 수행한 해석방법의 기능은 3차원 동적해석프로그램 MPDAP-3D에 추가되었으며, 향후 발파공법에 의한 지하공동구조체의 건설시 구조체의 안전성을 평가하는데 활용가능할 것으로 예상된다.

  • PDF

EA성숙도가 정보화관리 성과에 미치는 영향에 관한 연구 (The Effect of EAMaturity on Information Management and Performance)

  • 이동욱;전성현;박찬욱
    • 한국IT서비스학회지
    • /
    • 제11권1호
    • /
    • pp.39-58
    • /
    • 2012
  • This study was carried out to figure out the relationship between EAmaturity, information management capacity, and information performance, and find the effect between these variables and the reciprocal causation. The study found that EAmaturity has a positive effect on information resource management and performance. In other words, the effect of input, calculation, management and utilization factors on information planning in EAmaturity showed that calculation, management and utilization factors have a significant effect on the information planning. While the effect of input, calculation, management and utilization factors on information introduction and management showed that only both calculation and utilization have a significant effect on the information management factor. It says that EAinput in EAmaturity does not play a big part in the planning stage, as well as not go through a series of process that is connected to the maturity stage by immediate field application. Consequently, EAmaturity varies from the level that EAcreates introduction and performance according to organization. This suggests that the maturity and performance can be also changed by the level that EAcreates information performance by accepting and using this capability within organization as well as the capability to introduce and fully perform the EAsystem presented in enterprise architecture framework of public sector.

점성 손실모델 도입에 의한 축류 압축기 준 3차원 압축성 유동해석 (A Study on the Quasi-3-Dimensional Compressible Flow Calculation by Introduction of Viscous Loss Model in Axial-Flow Compressor)

  • 조강래;이진호;김주환
    • 대한기계학회논문집
    • /
    • 제13권5호
    • /
    • pp.1044-1051
    • /
    • 1989
  • 본 연구에서는 Wu가 제시한 수학적 모델에 기초를 둔 비점성 준3차원 유동해 석에 실제 유체의 점성효과 및 2차유동 등에 의해 발생하는 손실들을 손실모델로 반영하여 그 타당성 유무를 검토하는 데 목적을 두었다.