• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2004년도 제29회 추계학술대회 발표논문집
• /
• pp.96-99
• /
• 2004

본 연구는 전신 GSO PET 스캐너를 사용하여 Cs-137 투과 선원을 이용한 감쇠보정기법들을 평가하는 것이다. 이를 위하여, 4개의 모양이 다른 팬텀들을 사용하여 감쇠보정기법들을 검사하였다. 뇌영상을 위하여 256 mm의 시야가 사용되었고, 약 110MBq의 F-18 선원이 팬텀실험을 위해 사용되었다. 감쇠를 보정하기위해서, 방출선원이 팬텀에 주입된 후, Cs-137점선원의 투과 스캔 데이터가 획득되었다. 방출선원 데이터는 산란보정을 하였고, 4가지 종류의 감쇠보정기법을 이용하여 감쇠보정을 하였다. 재구성된 팬텀 영상들이 비교평가되었고, 임상 뇌영상은 핵의학 의사들이 평가를 하였다. 결과적으로 균일성 평가를 위한 원형팬텀의 영상에서, 측정감쇠보정기법을 이용시 가운데 부분이 떨어져 보였으나, 나머지 감쇠보정 기법들에서는 균일하게 보였다. 임상 뇌 데이터의 경우, 두개골에 대한 감쇠 효과를 볼 수 있었고, 두개골에 대한 감쇠보정이 적용되지 않은 영상에서는 인공산물이 발생하는 것을 보여주었다. 결론적으로, 정량적 뇌영상에 대한 정확도를 높이기 위해서, 두개골에 대한 감쇠보정이 적용된 개선된 감쇠보정 방법이 요구되어진다. 본 연구는 앞으로 Cs-137 점선원을 이용한 감쇠보정기법이 포함된 뇌 PET 영상 장치를 개선하는데 유용할 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제25권2호
• /
• pp.181-200
• /
• 2007

A decoupling technique for simulating near-field wave motions in two-phase media is introduced in this paper. First, an equivalent but direct weighted residual method is presented in this paper to solve boundary value problems more explicitly. We applied the Green's theorem for integration by parts on the equivalent integral statement of the field governing equations and then introduced the Neumann conditions directly. Using this method and considering the precision requirement in wave motion simulation, a lumped-mass FEM for two-phase media with clear physical concepts and convenient implementation is derived. Then, considering the innate attenuation character of the wave in two-phase media, an attenuation parameter is introduced into Liao's Multi-Transmitting Formula (MTF) to simulate the attenuating outgoing wave in two-phase media. At last, two numerical experiments are presented and the numerical results are compared with the analytical ones demonstrating that the lumped-mass FEM and the generalized MTF introduced in this paper have good precision.

• Journal of Magnetics
• /
• 제18권1호
• /
• pp.43-49
• /
• 2013

A pulsed ferrite magnetic field generator (FMFG) was designed for the use in the 1000 m long through-the-earth (TTE) communication system for mining disaster situations. To miniaturize the TTE system, a ferrite core having 10,000 of permeability was used for the FMFG. Attenuation of the magnetic field intensity from the FMFG (200-turn and 0.18 m diameter) was calculated to be 89.95 dB at 1000 m depth soil having 0.1 S/m of conductivity. This attenuation was lower than 151.13 dB attenuation of 1 kHz electromagnetic wave at the same conditions. Therefore, the magnetic-field was found to be desirable as a signal carrier source for TTE communications as compared to the electromagnetic wave. The designed FMFG generates the magnetic field intensity of $1{\times}10^{-10}$ Tesla at 1000 m depth. This magnetic field is detectable by compact magnetic sensors such as flux gate or magnetic tunneling junction sensor. Therefore, the miniature FMFG TTE communication system can replace the conventional electromagnetic wave carrier type TTE system and allow reliable signal transmission between rescuer and trapped miners.

• 대한방사선기술학회지:방사선기술과학
• /
• 제23권1호
• /
• pp.13-19
• /
• 2000

We have presented with the "A study on overexposure rate according to over-density in chest X-ray radiography(I)" last year. In this report, We could calculate the entrance skin dose from chest X-ray film density the formula $I_0=Ix/e^{-{\mu}x}{\times}mG$, (mG is Bucky factor) was used to deliver the skin dose. At that time, There was two problems that the Bucky factor from maker was not equal to field experience and the field size influenced on the Attenuation Rate. The experiment of Bucky factor was done from film method and retried the Attenuation Rate of Acryle phantom according to Good & Poor geometry. As the results, The Bucky factor from maker higher than in this experiments $30{\sim}40%$. The Attenuation Rate in good geometric condition brings about a little alteration compare with poor geometric condition. In the field experiment, we could get the chest image with very low entrance skin radiation dose $29.3{\mu}Sv$, especially with air gap methode, the entrance skin dose was detected $10{\mu}Sv$.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권4호
• /
• pp.343-350
• /
• 2021

3D printing technology is an additive manufacturing technology produced through 3D scanning or modeling method. This technology can be produced in a short time without mold, which has recently been applied in earnest in various fields. In the medical field, 3D printing technology is used in various fields of radiology and radiation therapy, but related research is insufficient in the field of nuclear medicine. In this study, we compare the characteristics of traditional nuclear medicine phantom with 3D printing technology and evaluate its applicability in clinical trials. We manufactured the same size phantom of poly methyl meta acrylate(PMMA) and acrylonitrile butadiene styrene(ABS) based on the aluminum step wedge. We used BrightView XCT(Philips Health Care, Cleveland, USA) SPECT/CT. We acquired 60 min list mode for Aluminum, PMMA and ABS phantoms using Rectangular Flood Phantom (Biodex, New York, USA) ^99mTcO₄ 3 mCi(111 MBq), 6 mCi (222MBq) and ⁵⁷Co Flood phantom(adq, New Hampshire, USA). For the analysis of acquired images, the region of interest(ROI) were drawn and evaluated step by step for each phantom. Depending on the type of radioisotope and radiation dose, the counts of the ABS phantom was similar to that of the PMMA phantom. And as the step thickness increased, the counts decreased linearly. When comparing the linear attenuation coefficient of Aluminum, PMMA and ABS phantom, the linear attenuation coefficient of the aluminium phantom was higher than that of the others, and the PMMA and ABS phantom had similar the linear attenuation coefficient. Based on ABS phantom manufactured by 3D printing technology, as the thickness of the PMMA phantom increased, the counts and linear attenuation coefficient decreased linearly. It has been confirmed that ABS phantom is applicable in the clinical field of nuclear medicine. If the calibration factor is applied through further research, it is believed that practical application will be possible.

• 한국의학물리학회지:의학물리
• /
• 제4권1호
• /
• pp.55-71
• /
• 1993

Measured and calculated the TMR and SMR factors from percent depth dose underpartial attenuators which cover the whole part of the radiation beam with variousfilter thickness from 0 to 50 mm. This study was performed for x-ray beams generated with a 6 MV linear acceleratorat source to surface distance of 100cm in a water phantom for Lipowitz metal. TMR(0,d,t) was derived from non-linear polynomial regression with field sizedifferencies and a given filter thickness. In this experiments, the TMR(0,10,50) of 50mm of filter thickness was showed13.6 % higher than that of open field and SMR(5,10,50) was 38.5% smaller than thatof open field in same depth.

• 한국소음진동공학회논문집
• /
• 제11권4호
• /
• pp.71-77
• /
• 2001

In this paper, stress wave propagation characteristics of MR(Magneto-rheological) inserts are experimentally investigated. Generally, stress waves of structures such as warships or submarines are induced by shock waves from underwater explosion. Their fatal effects on the shipboard equipments or structures damage the performance of warships. But, such a problem can be solved by controlling the stress waves propagating through structures by means of MR inserts. MR insert consists of two aluminum layers and MR fluid filled in between. Two piezoceramic disks are embedded on the host plate as a transmitter and a receiver of stress waves. Pulse waves are generated by the transmitter and they reach to the receiver through the MR insert. Permanent magnet and magnetic coil are used to produce magnetic field at the MR insert. In the presence of magnetic field, MR particles are arranged in chains parallel to the magnetic field such that the transmitted stress waves are reduced. Attenuation of stress waves is experimentally investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.227-236
• /
• 1997

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and has become a very serious issue in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult because the poorness of basic data and insufficiency of the existing research. Especially, in order to establishment of sound insulation plan about pilings work noise that has highly sound pressure level and impactive, a real situation of sound characteristics about pilings work noise in foundation work demands close investigation. In this point, this study attempts to surveys the characteristics of attenuation and propagation of construction equipment noise in pilings work using SIP(soilcement injected precast pile) method. And this study intends to get the basic data for establishment of a standard about construction noise.

• 대한토목학회논문집
• /
• 제36권4호
• /
• pp.645-650
• /
• 2016

본 연구에서는 기존의 수리모형실험에서 나타나는 파랑-흐름 상호작용에 의한 파고감쇠현상을 분석하기 위하여 Navier-Stokes Solver를 이용한 수치시뮬레이션을 수행하였다. 파랑과 흐름이 만날 경우, 유속의 난류성분이 증가하여 난류강도가 커지는 것을 확인하였다. 이것으로부터 파랑이 전파될수록 난류의 영향으로 파랑에너지가 감소하고, 파고가 줄어드는 현상을 이해할 수 있었다. 그리고 흐름의 유속이 증가할수록 난류강도가 증가함으로 파고감쇠효과가 크게 나타났다. 또한 파랑이 동일한 거리를 전파할 때에 파고가 작을수록, 주기가 짧을수록 파고감쇠현상이 심화되는 것을 확인할 수 있었다.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.21-27
• /
• 2015

Induction bending is a method that allows the bending of any material that conducts electricity. This technology applies a bending force to a material that has been locally heated by an eddy current induced by a fluctuating electromagnetic field. Induction bending uses an inductor to locally heat steel through induction. This results in a narrow heat band in the shape to be bent. In general, the reduction of thickness attenuation of a large-diameter steel pipe is not allowed to exceed 12.5%. In this paper, in order to meet the standard of thickness attenuation reduction, a non-uniform heating temperature jump-bending process was investigated. As a result, the developed bending technique meets the requirements of thickness attenuation reduction for large-diameter steel pipes.