• 한국해양공학회지
• /
• 제17권2호
• /
• pp.40-46
• /
• 2003

The corrosion resistance of super duplex stainless steel on both its fibrous and dispersed phase was investigated. These structures consist of various volume fraction and distribution of austenite structure, which were obtained by changing the heat treatment temperature and cycle. The fibrous phase had higher austenite volume fraction than that of the dispersed phase at the same temperature. Corrosion resistance of super duplex stainless steel was evaluated through an immersion test and an impingement test, using 35% HCI and sea water, respectively. Super duplex stainless steel was compared with STS316L and STS304. The corrosion resistance of super duplex stainless steel was superior to ST316L and STS304. The dispersed phase of super duplex stainless steel was more stabilized than the fibrous phase in corrosion. The magnitude of corrosion rate was in order STS304, STS316L, fibrous phase of super duplex stainless steel and dispersed phase of super duplex stainless steel.

• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.171-175
• /
• 1998

$Al_2O_3$-TiC composites were prepared from aluminum, titanium oxide, and carbon fibers by self-propagating high-temperature synthesis(SHS). After the SHS reaction, the TiC phase in the sample was found either fibrous or non-fibrous shape. The fraction of the fibrous TiC phase varied with the amount of $Al_2O_3$ diluent addition. The optimum amount of diluent to make fibrous carbide was determined to be 30%. The fibers were hollow inside and made of multiple grains with a composition of titanium carbide. The hollow fiber formation mechanism was suggested and discussed. The synthesized powders were consolidated to dense composites by hot pressing at $1750^{\circ}C$ under 30 MPa.

• 한국분말재료학회지
• /
• 제9권3호
• /
• pp.148-152
• /
• 2002

The microstructures and indentation fracture of pressureless-sintered $DyNbO_4$ crystalline were investigated as a basic study for the application of weak phase of fibrous monolithic composites. They were comprised with many lamella twins as well as micro-cracks at the grain boundaries. The hardness at room temperature was remarkably low value(575 Hv) due to the low relative density and existence of microcracks at grain boundaries. The main fracture mode was a typical intergranular fracture, and showed remarkable micro-cracking effect. The heavy plastic deformation was observed around the site of indentation. In addition, the $DyNbO_4$ was expected to apply as a weak phase in the fibrous monolithic composites because of the low hardness and easily plastic deformation that could be led the preferable pulled-out and microcracking toughening under the failure.

• 열처리공학회지
• /
• 제14권4호
• /
• pp.205-211
• /
• 2001

The characteristics of super duplex stainless steel were investigated on its fibrous structure and dispersed structure. These structures consist of various volume fractions and distributions of the austenite phase that were obtained by changing the heat treatment temperature and cycle. The fibrous structure had higher austenite volume fraction than dispersed structure on the same temperature. As the austenite volume fraction increased in both structures, tensile strength and elongation increased, but hardness decreased. Fatigue life of fibrous structure parallel to rolling direction was shorter than that of perpendicular to rolling direction. Fatigue life of dispersed structure was longer than parallel fibrous structure, and shorter than perpendicular fibrous structure. Fatigue crack propagation rate of fibrous structure was faster than that of dispersed structure.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.213-218
• /
• 2003

Fibrous monolithic control of$ Al_2$$O_3$ -$ZrO_2$composite was investigated by multi-pass extrusion process. To obtain sound $Al_2$$O_3$-X $O_2$sintered bodies, burning out and sintering process were carefully carried out. The sintered bodies showed continuous, fibrous monolithic microstructure without any swelling. Many microcracks were observed at the $Al_2$$O_3$-$ZrO_2$interfaces due to the mismatching of thermal expansion coefficient between $Al_2$$O_3$ and $ZrO_2$phase. Most of m- $ZrO_2$grains included twin defects such as (001), (010) and (011) type to accommodate the phase transformation induced stress.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.40.2-40.2
• /
• 2009

Using the favorable resorption behavior of amorphous Calcium phosphate (CaP) we fabricated a gelatin basednano fibrous mat by electrospinning for using as a fast healing patch for minorbone defects. Bone is predominantly formed by an inorganic phase of nano-crystalline HAp materials and nano fibrous protein material of collagen. The osteoblast cells, which are the bone formation cells and are key to the new bone formation, receive these materials to form new bone. Taking these considerations we make a new nano fibrous mat of amorphous CaP and gelatin, which is derived from collagen itself. A polymer carrier of poly caprolactone(PCL) was used in the system to stabilize the materials in biological condition. The electrospinning conditions were optimized for smooth mat without any droplet formation. The fabricated mat was characterized for its morphologyby SEM. Mechanical properties like tensile strength was evaluated. To investigate the bio-compatibility we performed the MTT assay and investigated its resorption behavior and apatite formation behavior by SBF immersion.

• 한국광물학회지
• /
• 제28권2호
• /
• pp.165-171
• /
• 2015

부산과 울산의 중심지역에 대해 공기 중의 분진시료를 채취하여, 위상차현미경, 위상차분산현미경, 주사전자현미경 등으로 석면을 분석한 결과, 석면은 검출한계 이하로서 확인되지 않았다. 공기중의 분진시료에는 섬유상물질이 다수 포함되었으나, 이들은 대부분 유기질 섬유인 것으로 나타났다. 무기질 섬유물질로는 암면, 세라믹섬유, 석고 등이 소량 포함되었으며, 비섬유상인 석영, 방해석, 장석등의 광물도 가끔 관찰되었다. 국내의 공기 중 분진의 석면분석은 주로 위상차현미경으로 관찰하는 것으로 규정되어 있으나, 이것만으로는 석면의 식별이 불가능한 것으로 나타났다. 따라서 일본 JIS법과 같이 저온회화 처리 장치에 의한 유기물질 제거 후에 분산염색법으로 석면을 식별하고 계수하는 것이 효율적인 것으로 사료된다.

• 한국주조공학회지
• /
• 제16권6호
• /
• pp.523-536
• /
• 1996

This paper relates to fabrication processing analysis of metal matrix composites by the injection of liquid metal into a fibrous preforms. One dimensional heat transfer analysis during squeeze infiltration process of aluminum base composites has been studied. An analysis method was investigated for the temperature distribution, infiltration velocity and melt infiltration characteristics with the commercial preform with short fiber array. When molten metal is infiltrated in a fibrous preform with random orientation, phase transformation will be occurred in a region such as molten metal, solidified region, preform region and infiltration composites region. a mathematical modelling for a solidification phenomena in fabrication process of metal matrix composites using a squeeze infiltration technique was investigated by the basic relations for liquid metal into a fibrous preform. The temperature distribution of theoretical results was compared with experimental data.

• KSBB Journal
• /
• 제9권2호
• /
• pp.98-103
• /
• 1994

본 연구는 크로마토그래피적 방법에 의한 단백질 분리를 규모화시키기 위한 기초적인 실험을 행한 것이다. 단백질 분리를 위해서 화학적 처리된 폴리에틸렌섬유를 미국 Millipore사의 여과 Cartridge에 장착시키고, 그 시스템에서 단백질인 5%의 Bovine Serum Albumin을 통과시켜 섬유 표면의 단백질 흡착능력과 결합 가역성 등을 관찰하였다. 또한 실험자료들을 Omega 프로그램이 내장된 컴퓨터와 맥킨토시의 Kaleidagraph로 자료처리 한 것을 보여주었다.

• 공업화학
• /
• 제7권3호
• /
• pp.580-587
• /
• 1996

소성법을 이용하여 반응은도 $1050^{\circ}C$, 반응시간 3시간, $K_2CO_3$에 대한 $TiO_2$(rutile)의 mole ratio 2.8 그리고 $1^{\circ}C/min$의 서냉속도로 서냉하여 초생상을 합성하였으며, 이를 비등수로 10시간 처리하여 층상구조를 갖는 장섬유의 $K_2Ti_4O_9$을 효과적으로 합성하였다. 또한 합성된 $K_2Ti_4O_9$의 열적안정성을 조사하였으며, 이 결과 $K_2Ti_4O_9$은 열적으로 매우 불안정하여 온도가 올라감에 따라 $K_2O$와 $K_2Ti_6O_{13}$으로 분리됨을 확인하였다.