• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.54-59
• /
• 2006

Paperboards used for linerboard of corrugated fiberboard box were coated with different concentrations of polylactic acid (PLA) solution and the effects of harsh environmental conditions such as high humidity and temperature (96% RH at $30^{\circ}C$ for up to 5 days), and freeze-thaw ($-20^{\circ}C$ for a day and then thaw at room temperature for 30 min) conditions on the ring crush (RC) strength of the boards were investigated. One to five percent PLA solutions were coated onto SC manila linerboard ($20{\times}27cm$) using a No. 20 wire bar coater and the ring crush strength was measured using a computer-controlled Advanced Universal Testing System in accordance with TAPPI Test Method T 822 om-93. The RC strength increased significantly when the concentration of coating solution increased and appreciable changes were found when the concentration increased from 0 to 2% (P<0.05). Similar pattern of results was found after 5-day storage at $30^{\circ}C$ and 96% RH. Although such highly humid condition increased moisture content in the samples up to 3.95 from 0.97 times, the RC strength decreased in the range from 29.9 to 48.5%. The freeze-thaw treatment increased the moisture content only up to 1.27% and the reduction in the RC strength ranged from 21.1 to 28.1 %. The results were promising: the samples coated with 5% PLA solution showed 29.9% reduction in the RC strength while that of control was 48.5% during highly humid condition stated above.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.115-120
• /
• 2002

Woodceramics are new porous carbon materials obtained by burning wood or woody materials impregnated with thermosetting resin in a vacuum furnace. In this paper, the change of dimensions and bending strength of woodceramics which were made from medium density fiberboard have been investigated to examination the possibility of utilization as a woodceramics materials. 1) An increasing rate of dimension in impregnated board increased with increasing resin impregnation rate. And increasing rate of thickness was higher than that of length. 2) When the resin impregnation rate increased, the bending strength of impregnated board had a tendency to increase. 3) The rates of weight loss, length and thickness reduction of woodceramics showed a slight increase with increased burning temperature. 4) The density of woodceramics showed a increase from at 500℃ till at 800℃ with increasing burning temperature but decrease at 1,000℃ 5) When the burning temperature increased, the bending strength of woodceramics had a tendency to increase.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.165-171
• /
• 2002

This study was to investigate the adhesion properties of fancy veneer and base panels and formaldehyde emission of wood-based floorings bonded with urea-melamine formaldehyde adhesives. We focused on stoichiometric mole ratio of reactive functional groups. The urea-melamine formaldehyde adhesives were made at twelve different formaldehyde/urea-melamine mole ratios. The interlaminated shear strength and formaldehyde emission of wood-based floorings bonded with selected adhesive among these adhesives were examined. The results showed that the bonding properties were high and the formaldehyde emission was low as the adhesive consisted of stoichiometric mole ratio of formaldehyde/urea-melamine. Interlaminated shear strengths of HDF(High Density Fiberboard) flooring were over 14 kgf/cm² at all mole ratios. At the mole ratio of 1.0, HDF flooring showed low value of formaldehyde emission of 953 mg/L. Interlaminated shear strengths of Plywood flooring were high, 14.02 kgf/cm² at mole ratio of 1.4. At the mole ratio of 1.0, Plywood flooring showed low value of formaldehyde emission of 0.26 mg/L.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.1-10
• /
• 2002

The aim of this research was to investigate the manufacturing possibility of the paper sludge-synthetic fiber-wood fiber composite. Three levels of the formulation of paper sludge, synthetic fiber and wood fiber (5:5:90, 15:15:70, 25:25:50), two types of adhesive (PMDI, urea-formaldehyde resin) and three levels of density(0.7, 0.8, 0.9) were designed. From the test result, composites with similar or better properties, when compared with commercial fiberboard, appeared to be possible by the addition of up to 30~50% paper sludge and synthetic fiber into wood fiber.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.390-399
• /
• 2015

This study was conducted to examine the potential use of coffee waste (CW) as an adsorbent of HCHO by adding into fiberboard. For the purpose, CW treated with various temperatures and times was placed in desiccator with a HCHO solution and then the HCHO adsorptivity of the CW was measured by acetylacetone (ATAN) and DNPH methods. In the results of ATAN analysis, amount of HCHO adsorbed in distilled water was the lowest on the non-treated CW and steadily increased to $100^{\circ}C$-treated temperature. However, over the $100^{\circ}C$, heating temperature (H-Temp) had not an effect on the HCHO adsorptivity of CW. Amount of HCHO adsorbed on CW itself was the highest at $100^{\circ}C$ H-Temp, following by $50^{\circ}C$, $150^{\circ}C$, $0^{\circ}C$, $250^{\circ}C$ and $200^{\circ}C$. For the HCHO adsorptivity of CW measured by DNPH methods, HCHO was not detected in the distilled water stirred with non-treated CW, but detected from the distilled water stirred with heating-treated CW. The content was the highest in the CW heating-treated at $100^{\circ}C$ for 10 min. In addition, HCHO adsorbed on CW itself increased to the H-Temp of $100^{\circ}C$ regardless of heating time, but decreased or reduced greatly degree of the increase over $100^{\circ}C$ H-Temp. In conclusion, optimal heating conditions of CW for the HCHO adsorption might be H-Temp between 100 and $150^{\circ}C$ with 10 min according as technical and economical reasons. Heating-treated CW manufactured with above the conditions can be used as an adsorbent in conventional fiberboard production for reducing HCHO emssion.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.385-394
• /
• 2017

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.417-425
• /
• 2009

This study analyzed core issues addressed in the tentative agreement of WTO ministerial meetings held to finish WTO/DDA negotiations in Geneva in July 2008. The objectives of this study are to analyze changes in tariff reduction on timber products, and their influence on demand and supply of the items according to the modality of Non-Agricultural Market Access (NAMA) and to provide basic information for strategy formulation of our country for further WTO/DDA negotiations. The results indicate that there will not be significant changes in the tariff on sawnwood and on veneer sheets, however, the tariff on plywood need to be cut by around 50% from the applicable tariff rates of 2008 on condition that our country is in the position of developed countries. Therefore, the item of plywood is expected to be influenced greatly according to the change in tariff reduction. From the analysis of influence of tariff reduction on the demand and supply of timber products including sawnwood and wood based panels, such as plywood, particleboard, and fiberboard, the import quantities of the items are expected to be changed from 0.8% to 13.3% if our country is in the position of developed countries, however, they are expected to decline by 0.8%~44.3%, if our country is in the position of developing countries (22, coefficient for developing members).

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.3
• /
• pp.83-91
• /
• 2009

It is very difficult to export the fresh agricultural products to long distance countries such as USA and EU without any damage. Fresh products exporting would overcome very severe conditions such as hot and cold weather changes, heavy vibrations with rolling and pitching during the target distribution period, therefore, the packaging needs the immobility of products in the container and the keeping its quality by packaging materials or methods under any surrounding environments, especially. The physical strength of outer box should be designated according to its own characteristics for agricultural product packaging. Packaging dimension which would be fit to standard pallet is also very important factor to reduce the distribution cost. There have been many agricultural products researches for export packaging to the USA so far. However they have never got desirable results which enough to apply it in real. The main purpose of this research is to develop optimum compressive strength and optimum dimension of corrugated fiberboard box which would be used to USA export packaging of fresh melon as well as Japan.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.231-241
• /
• 2009

Trade specialization index, import market share, unit value index, market comparative advantage index have been applied to compare the competitiveness of forest products in Korean and European markets for the case of Korea-EU FTA. The results say that no items of non-timber products would show a surge of imports as a result of FTA. Timber products, however, such as non-coniferous plywood, continuously shaped wood (non-coniferous), densified wood, wood wool and flour, other (plywood), other (particle board, 441039)), other (fiberboard), oriented strand board (other), other (particle board, 441090), other (particle board, 441031), Prefabricated buildings of wood, fibreboard (of a density exceeding $0.5g/cm^3$ but not exceeding $0.8g/cm^3$), wooden frames (for paintings, photographs, mirrors or similar objects) and wood marquetry and inlaid wood are expected to increase of their imports by eliminating tariffs. For Korean exports no items of non-timber products have competitiveness in European market. For Korean pyroligneous liquid, which is the only competitive timber product in EU market in terms of MCA and TSI, it is difficult to decide whether it has competitiveness, since the actual exports have taken place occasionally during a period of last five years.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.217-230
• /
• 2020

Global warming has increased interest in reducing greenhouse gas emissions. And a policy has effort to reduce energy consumption as a greenhouse gas reduction plan. In Korea, 25% of total energy is consumed in the building sector. In order to reduce energy consumption of buildings, it is possible to expand the utilization of wood as a structural material or thermal insulation materials with low thermal conductivity. It is also reported that when used as an interior finishing material, the energy consumption of the building is reduced by up to 7% by insulation performance. In this study, the heat transfer characteristics and the heat capacity were compared according to the three type of finishing materials(cement, paulownia coreana, medium density fiberboard) normally used as indoor finish materials. Through this study, most of the heat transfer volumes are transferred in the form of radiant heat, and the result was derived from the highest amount of energy and heat transfer in the use of paulownia coreana. When indoor finishing materials are used as wood, it is deemed that energy efficiency inside the building will be improved.