• 한국염색가공학회지
• /
• 제34권4호
• /
• pp.241-249
• /
• 2022

As for military backpacks in Korea, utility backpack products equipped with various functions along with comfort and convenience are being developed. As a result, the volume and weight of the backpack increase, and many lightweight studies of the materials forming the backpack are being conducted. This study is a basic study on frame lightweight using fiber-reinforced composites to deal with aluminum, a back frame that maintains the shape of a backpack and provides stability when worn by combatants. As is known, only fiber-reinforced composites have sufficient light weight and mechanical properties, but the mechanical properties were reviewed by drilling holes to maximize the light weight. Tensile strength and flexural strength were measured by drilling 6mm, 12mm, 18mm, and 24mm holes, and the tensile strength and flexural strength were measured when 1, 3, 5, and 7 holes of 12mm were increased. As a result, even when the number of holes was increased, tensile strength did not change significantly, and the flexural strength showed to be higher in the case of 3 holes and 5 holes than in the case of 1 hole.

• Composites Research
• /
• 제19권6호
• /
• pp.16-22
• /
• 2006

다양한 조건 하에서 최상의 관통 특성을 발휘하기 위한 최적 조건에 대해 연구하였다. 섬유 종횡비(AR: 섬유 길이/섬유 직경), 계면 조건 그리고 섬유 함유량을 관통 저항력과 마찰력에 지대한 영향을 미치는 변수들로 고려하였다. 단섬유 강화고무의 관통 저항력은 기지에 비해 최대 3.4배 증가하였다. 동일한 섬유 종횡비와 섬유 함유량에서 계면 조건이 우수할수록 더 높은 관통 저항력을 보였다. 기지와 섬유 종횡비가 155이하인 일부 단섬유 강화고무의 마찰력은 존재치 않았다. 우수한 계면과 높은 섬유 종횡비를 갖는 단섬유 강화고무의 마찰력은 기지의 관통 저항력보다도 더 높았다. 전체적으로 계면 조건과 섬유 종횡비 그리고 섬유 함유량이 단섬유 강화고무의 관통 특성에 지대한 영향이 미침을 확인하였다.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.619-628
• /
• 2011

인체의 근육, 힘줄, 피부와 혈관 등은 일상생활 속에서 다양한 손상을 입는 경우가 많으므로 관심을 갖고 연구해야할 주제이다. 인체의 윤상인대의 역학적 특성을 얻기 위해서는 부족한 실험 자료를 감안하고서도 대변형뿐만 아니라 이방성 및 압축성까지 고려해야 하는 어려움이 있다. 본 연구에서는 섬유강화재료 모델을 사용하여 초탄성 재료 모델을 사용하고, 모재, 섬유 및 모재와 섬유와의 상관관계를 포함하는 에너지 함수를 도입하여 실험값과 비교하여 보았다. 윤상인대의 내부에서 2종류의 섬유는 일정한 각도를 갖고 있다고 가정하였다. 섬유강화재료 모델을 사용함에 있어서 모재에 대한 두 종류의 다른 에너지 함수를 대입하여 Neo-Hookean 재료를 사용하여 계산한 결과 및 기존에 알려진 실험결과와 비교하였으며 본 연구에서 제시된 모재에 관한 에너지 함수의 타당성을 보였다.

• Computers and Concrete
• /
• 제29권 6호
• /
• pp.393-405
• /
• 2022

Lightweight concrete is a superior material due to its light weight and high strength. There however remain significant lacunae in engineering knowledge with regards to shear failure of lightweight fiber reinforced concrete beams. The main aim of the present study is to investigate the optimum usage of steel fibers in lightweight fiber reinforced concrete (LWFRC). Multi-scale finite element model calibrated with experimental results is developed to study the effect of steel fibers on the mechanical properties of LWFRC beams. To decrease the amount of steel fibers, it is preferred to reinforce only the middle section of the LWFRC beams, where the flexural stresses are higher. For numerical simulation, a multi-scale finite element model was developed. The cement matrix was modeled as homogeneous and uniform material and both steel fibers and lightweight coarse aggregates were randomly distributed within the matrix. Considering more realistic assumptions, the bonding between fibers and cement matrix was considered with the Cohesive Zone Model (CZM) and its parameters were determined using the model update method. Furthermore, conformity of Load-Crack Mouth Opening Displacement (CMOD) curves obtained from numerical modeling and experimental test results of notched beams under center-point loading tests were investigated. Validating the finite element model results with experimental tests, the effects of fibers' volume fraction, and the length of the reinforced middle section, on flexural and residual strengths of LWFRC, were studied. Results indicate that using steel fibers in a specified length of the concrete beam with high flexural stresses, and considerable savings can be achieved in using steel fibers. Reducing the length of the reinforced middle section from 50 to 30 cm in specimens containing 10 kg/m3 of steel fibers, resulting in a considerable decrease of the used steel fibers by four times, whereas only a 7% reduction in bearing capacity was observed. Therefore, determining an appropriate length of the reinforced middle section is an essential parameter in reducing fibers, usage leading to more affordable construction costs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.933-937
• /
• 1995

The design of injection molded prlymeric parts has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the parts. This study shows CAE approach for the design of the seat frame of fiber-reinforced composite material in order to realize the concept os rationsl design for the productivity and quality of mold making. The knowledge-based CAE system is constructed by adding the knowledge-basw module for the design evaluation and appropriate CAE programs for mold design analysis in order to provied designers, at the initial design stage, with comprehensive process knowledge for the performance analysis and the design evaluation. A knowledge-based CAE system is a new tool which enables the concurrent design with integrated and balanced design decisions at the initial design stage of injection molding.

• Coupled systems mechanics
• /
• 제11권1호
• /
• pp.15-32
• /
• 2022

The comprehensive understanding of the fiber reinforced polymer behavior requires the use of advanced non-destructive testing methods due to its heterogeneous microstructure and anisotropic mechanical proprieties. In addition, the material response under load is strongly associated with manufacturing defects (e.g., voids, inclusions, fiber misalignment, debonds, improper cure and delamination). Such imperfections and microstructures induce various damage mechanisms arising at different scales before macrocracks are formed. The origin of damage phenomena can only be fully understood with the access to underlying microstructural features. This makes X-ray Computed Tomography an appropriate imaging tool to capture changes in the bulk of fibrous materials. Moreover, Digital Volume Correlation (DVC) can be used to measure kinematic fields induced by various loading histories. The correlation technique relies on image contrast induced by microstructures. Fibrous composites can be reinforced by different fiber architectures that may lead to poor natural contrast. Hence, a priori analyses need to be performed to assess the corresponding DVC measurement uncertainties. This study aimed to evaluate measurement resolutions of global and regularized DVC for glass fiber reinforced polymers with different fiber architectures. The measurement uncertainties were evaluated with respect to element size and regularization lengths. Even though FE-based DVC could not reach the recommended displacement uncertainty with low spatial resolution, regularized DVC enabled for the use of fine meshes when applying appropriate regularization.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.385-390
• /
• 2003

As growing of industrialization and increasing of population, the quantities of waste glasses are rapidly growing in the earth. It cause some problems such as the waste of natural resources and environmental pollution. In this context, recycling waste glass as a material of concrete has a great advantage environmentally and economically. This study is aimed to investigate the effect of load and deflection on fiber reinforced concrete slab model utilizing waste glass by fine aggregates. The flexural strength of the concrete including waste glass increased considerably, as the inclusion rate of steel fiber were increased. And the first crack load, maximum load and energy absorption capacity increased remarkably as the inclusion rate of steel fiber were increased. Therefore, in this study we confirmed the possibility of application for the usage of waste glass to the steel fiber reinforced concrete.

• 구강회복응용과학지
• /
• 제22권1호
• /
• pp.23-27
• /
• 2006

This case reports describe a new approach to the use of polymers in orthodontics, using a fiber reinforced composite(FRC). FRC was successfully used in a periodontal splints, fiber post for endodontic use, orthodontic retainer and space maintainers, implant prosthesis, large span bridge, management of cracked tooth, anchorage reinforcement in orthodontics. FRC has highly favorable mechanical properties, and its strength-to-weight ratios is superior to those of most alloys. FRC has potential for use in many applications in dentistry and is expected to gain increasing application and popularity in dentistry. These case reports show that FRC is a promising anchorage reinforcement material for use in orthodontic practice.

• 한국안전학회지
• /
• 제16권3호
• /
• pp.135-142
• /
• 2001

본 연구에서는 복합소재인 GFRP(Glass Fiber Reinforced Polyester)의 2차원 절삭공정에서 주파수 스팩트럼과 절삭 메커니즘과의 연관성에 관하여 논의한다. 해석방법으로는, 공정중 발생하는 절삭력 신호를 FFT에 의해 주파수 분석하고 주파수 스팩트럼과 다양한 칩형성 메커니즘과의 연관관계를 모델링한다. 특히, 섬유경사각(Fiber orientation angle), 절삭변수 그리고 공구형상이 절삭 메커니즘에 미치는 영향을 평가하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.85-86
• /
• 2017

Fiber reinforced concrete as a construction material has been widely used. Fibers, as the reinforced component, the physical properties and the distribution influence the engineering properties of the composite. To illustrate the engineering properties, fiber distribution and orientation are necessary. Steel fibers can be easily captured by X-ray, but it is difficult them to express being numerical because they don't show as perfect circular shape on the grinding face. To get the more exact information for this, the numerical method for the orientation and distribution of fibers have to be more elaborately. This paper presents a possible method which makes the calculate for orientation possible.