• Korean Journal of Agricultural Science
• /
• v.44 no.1
• /
• pp.86-94
• /
• 2017

In Korea, chemical analysis of animal feed is done through authorized feed analysis laboratories (AFALs). Analysis results among the AFALs need to be similar or within acceptable variations; however, there is no experimental evidence of their comparability. We aimed to determine the level of variation of feed chemical analysis results from different AFALs. For this, we requested analysis of four kinds of feed (corn, soybean meal, corn gluten feed, and ryegrass) to eight AFALs and the Cumberland Valley Analytical Services (CVAS) which is an internationally well-recognized feed analysis laboratory. The AFALs spent more time on analysis than did CVAS. Fiber analysis results varied significantly among laboratories. However, moisture, CP, and ash content values showed almost no variation. At least one AFAL obtained results with significant differences from CVAS for all tested values. These differences can be explained by the followings: 1) the standard methods for feed analysis (SMFA) established for AFALs are not detailed enough to control the analytical variations among different laboratories and 2) guidelines are insufficient for the quality control of analysis results in Korea. Failure to accurately identify the nutritional components of the feed could mean failure to provide adequate nutrients to the animals. Therefore, efforts to reduce the differences among AFALs, such as revising SMFA and publishing guidelines on quality control of feed analysis results, are important.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.88-93
• /
• 2001

Carbon fiber epoxy composite are widely used in airframe structures, space vehicles, sports equipment, and high speed reciprocating parts for industrial machinery. In this paper, the groove processing characteristics of carbon fiber epoxy com-posite was experimentally investigated in order to study the endmill operation of fiber reinforce epoxy composites. Followings are main finding from the experimental results. First, the cutting and bending force in groove processing of the carbon fiber epoxy composite increased as the spindle speed deceased. They also deceased as the table feed increased. Second, the good cutting status obtained at the entrance of groove while delamination occurred at the exit of groove, Third, the regular high speed steel endmill was not efficient, thus the new endmill such as coated carbide rooter endmill or dia-mode endmill should be used for the effective endmll operation of carbon filber epoxy composites.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.6
• /
• pp.871-879
• /
• 2014

Two experiments were conducted to determine the digestible energy (DE) and metabolizable energy (ME) contents of corn gluten feed (CGF) for finishing pigs and to develop equations predicting the DE and ME content from the chemical composition of the CGF samples, as well as validate the accuracy of the prediction equations. In Exp. 1, ten CGF samples from seven provinces of China were collected and fed to 66 finishing barrows (Duroc${\times}$Landrace${\times}$Yorkshire) with an initial body weight (BW) of $51.9{\pm}5.5$ kg. The pigs were assigned to 11 diets comprising one basal diet and 10 CGF test diets with six pigs fed each diet. The basal diet contained corn (76%), dehulled soybean meal (21%) and premix (3%). The ten test diets were formulated by substituting 25% of the corn and dehulled soybean meal with CGF and contained corn (57%), dehulled soybean meal (15.75%), CGF (24.25%) and premix (3%). In Exp. 2, two additional CGF sources were collected as validation samples to test the accuracy of the prediction equations. In this experiment, 18 barrows (Duroc${\times}$Landrace${\times}$Yorkshire) with an initial BW of $61.1{\pm}4.0$ kg were randomly allotted to be fed either the basal diet or two CGF containing diets which had a similar composition as used in Exp. 1. The DE and ME of CGF ranged from 10.37 to 12.85 MJ/kg of dry matter (DM) and 9.53 to 12.49 MJ/kg of DM, respectively. Through stepwise regression analysis, several prediction equations of DE and ME were generated. The best fit equations were: DE, MJ/kg of DM = 18.30-0.13 neutral detergent fiber-0.22 ether extract, with $R^2$ = 0.95, residual standard deviation (RSD) = 0.21 and p<0.01; and ME, MJ/kg of DM = 12.82+0.11 Starch-0.26 acid detergent fiber, with $R^2$ = 0.94, RSD = 0.20 and p<0.01. These results indicate that the DE and ME content of CGF varied substantially but the DE and ME for finishing pigs can be accurately predicted from equations based on nutritional analysis.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.391-400
• /
• 2017

Italian ryegrass (IRG) is one of the fastest growing grasses available to farmers. It offers rapid establishment and starts growing early in the following spring and has fast regrowth after defoliation. So, IRG can be utilized as the dominant/single species of grass used in a farming system, or to play a role as a large producing pasture and sacrificial paddock. The objective of this study was to develop the use of unmanned aerial vehicle (UAV) for the evaluation of feed value of IRG. For this study, UAV imagery was taken on the Nonsan regions two times during the IRG growing season. We analyzed the relationships between $NDVI_{UAV}$ and feed value parameters such as fresh matter yield, dry matter yield, acid detergent fiber (ADF), neutral detergent fiber (NDF), total digestible nutrient (TDN) and crude protein at the season of harvest. Correlation analysis between $NDVI_{UAV}$ and feed value parameters of IRG revealed that $NDVI_{UAV}$ correlated well with crude protein (r = 0.745), and fresh matter yield (r = 0.655). According to the relationship, the variation of $NDVI_{UAV}$ was significant to interpret feed value parameters of IRG. Eight different regression models such as Linear, Logarithmic, Inverse, Quadratic, Cubic, Power, S, and Exponential model were used to estimate IRG feed value parameters. The S and exponential model provided more accurate results to predict fresh matter yield and crude protein than other models based on coefficient of determination, p- and F-value. The spatial distribution map of feed values in IRG plot was in strong agreement with the field measurements in terms of geographical variation and relative numerical values when $NDVI_{UAV}$ was applied to regression equation. These lead to the result that the characteristics of variations in feed value of IRG according to $NDVI_{UAV}$ were well reflected in the model.

• Korean Journal of Animal Reproduction
• /
• v.27 no.4
• /
• pp.325-331
• /
• 2003

This study was performed to test the cellulose digestibility using the transgenic pigs harboring cellulose degradation gene D (CelD). After delivered offsprings between normal pig and transgenic swine, DNA was isolated from piglets tail for PCR analysis. In first generation, five out of 65 piglets showed CelD positive. Unfortunately, four CelD-positive pigs were died during growing, but one survived pig was used as a transgenic founder to produce F$_1$ descendents. Among 3 F$_1$ transgenic pigs produced, one died and the remaining two pigs were used to test the fiber digest efficiency. An assorted feed was composite of 5％ fiber with other ingredients. The feed of 3 kg per day was provided to the pigs including transgenic founders and littermate controls. The manure quantity was measured daily for a month, and all manures were dried for three days to analysis nitrogen, phosphate and fiber concentrations. The fiber digestion efficiencies of the transgenic F$_1$ pigs showed approximately 10％ higher than those of control pigs. Fiber digestion was not greatly improved in transgenic pigs as it had been expected approximately 30％. Nitrogen concentration of transgenic pig's manure was slowly decreased compare to the control pigs. Because there were only two transgenic pigs tested, a large number of transgenic pigs may be necessary to obtain more reliable data. Breeding of animals to obtain sufficient transgenic pigs subjected for a further study is on progress. Taken together, this study demonstrated successful production of transgenic pigs with increase of cellulose digestibility in the porcine feed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1719-1724
• /
• 2016

The objective of this study was to determine the effects of physically effective neutral detergent fiber (peNDF) content in total mixed ration (TMR) on dry matter intake, digestibility, and chewing activity in fattening Hanwoo (Bos taurus coreanae) heifers. The experiment was designed as a replicated $3{\times}3$ Latin square using 12 heifers. Fattening heifers were offered one of three diets [high (T1), medium (T2), and low (T3) peNDF] obtained by different mixing times (3, 10, and 25 min) for the same TMR feed. The peNDF content of TMR was determined by multiplying the proportion of dry matter retained by a 1.18 mm-screen in a Penn State Particle Separator by the dietary NDF content. The $peNDF_{1.18}$ content was 30.36%, 29.20%, and 27.50% for the T1, T2, and T3 diets, respectively (p<0.05). Dry matter intake was not affected by peNDF content in TMR. Total weight gain in T1 group was significantly higher (p<0.05) than in T2 and T3 groups. However, weight gain did not differ between T2 and T3 groups. The feed conversion ratio decreased with an increase in the peNDF content (T1: 12.18, T2: 14.17, and T3: 14.01 g/g). An increase in the peNDF content of TMR was associated with a linear increase in the digestibility of dry matter, crude protein, crude fiber, neutral detergent fiber, and acid detergent fiber (p<0.05). Also, an increase in peNDF content of the TMR resulted in a linear increase in the number of chews in eating and ruminating (p<0.05), and consequently in the number of total chews (p<0.05). These results indicate that peNDF content affects digestibility and chewing activity. Consequently, the peNDF content of TMR should be considered for improving feed efficiency, digestibility, body weight gain, and performance in fattening heifers.

• Membrane Journal
• /
• v.11 no.2
• /
• pp.83-88
• /
• 2001

A methodology for enhancing the bond strength of a coating layer with a support has been established in preparing low-pressure reverse osmosis mO) hollow fiber which would experience shear badly in flowing feed un it. Prior to coating process, the support membrane, ultrafiltratiun polysulfone(PS) hollow fibers was pretreated with a reaction solution containing glutaraldehyde (GAl which has a good affinity to the suppurt membrane material as well as a reactivity to some of the cunstituents of cuating layer subsequently formed on the support by interfacial polymerization. Therefore, the reactant GA distributed unifonnly over the support layer through the pretreatment could provide a strong adhesive bond between the coating layer and the support, sticking fast to the support membrane through physical bond and, at the same time, connecting its functional group with the coating laycr by chemical bonding. Due to the strong adhesive bond, the resulting hollow fiber membrane showed an excellent long-tcnn stability in pcnneation.

• Composites Research
• /
• v.26 no.6
• /
• pp.380-385
• /
• 2013

Characteristics of delamination factor and surface roughness by drilling condition for glass fiber reinforced plastic (GFRP) composites were investigated in this paper. An expression to quantify the delamination factor was induced by using image pixels of the entry and the experimental drilling was accomplished by fabricating several GFRP specimens in condition of minimizing the effect of vibration and heat. A method for measuring 6 points average surface roughness was applied to acquire the more reliable roughness values. The experimental results showed that the delamination factor was decreased as the feed rate was increased and it was also slightly decreased as the cutting speed was increased. Also, it was investigated that the surface roughness at inner surface of drilled holes was increased as the feed rate was increased, whereas the roughness values were not affected by the cutting speed variation.

• Membrane Journal
• /
• v.23 no.2
• /
• pp.170-175
• /
• 2013

Poly (vinyl alcohol) (PVA) solution containing the glutaraldehyde (GA) as a crosslinking agent was coated onto the polyacrylonitrile (PAN) hollow fiber membrane as the supporter. Pervaporation experiments were carried out to characterize the prepared PVA/PAN composite membrane for water-isopropyl alcohol mixture. The flux and separation factor were measured at 30, 50, $90^{\circ}C$ for the feed mixture of aqueous 85 wt% IPA solution with varying the reaction temperature and composition of coating solutions. Typically the flux showed 1,870 $g/m^2{\cdot}hr$ at $90^{\circ}C$ feed mixture and the coating concentration of 3.5 wt% and the highest separation factor of 804 was obtained at $30^{\circ}C$ feed mixture and the coating concentration of 7 wt% as well.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.204-212
• /
• 2006

A numerical analysis was carried out for separation of carbon dioxide from carbon dioxide/nitrogen gas mixture by a polyethersulfone hollow fiber membrane which has shown a good stability against plasticization by carbon dioxide and an excellent separation efficiency fur carbon dioxide from its gas mixture. A computer program for carbon dioxide separation was developed using the Compaq Visual Fortran 6.6 software. Governing module equations were thought to be an initial-value problem and the nonlinear ordinary differential equations were simultaneously solved using the Runge-Kutta-Verner fifth-order method. From results of numerical analysis, the carbon dioxide partial pressure of the feed stream, the pressure ratio of the feed side to the permeate side and the feed gas residence time at the inside of a membrane were found to be very important factors to affect the permeation characteristics of carbon dioxide.