• Structural Engineering and Mechanics
• /
• v.59 no.5
• /
• pp.867-883
• /
• 2016

In this paper, the effects of steel-fiber and rebar reinforcements on the ultimate bearing strength of the local anchorage zone were investigated based on experiments and comparisons between test results and design-equation predictions (AASHTO 2012, NCHRP 1994). Eighteen specimens were fabricated using the same anchorage device, which is one of the conventional anchorage devices, and two transverse ribs were used to secure an additional bearing area for a compact anchorage-zone design. Eight of the specimens were reinforced with only steel fiber and are of two concrete strengths, while six were reinforced with only rebars for two concrete strengths. The other four specimens were reinforced with both rebars and steel fiber for one concrete strength. The test and the comparisons between the design-equation predictions and the test results showed that the ultimate bearing strength and the section efficiency are highly affected by the reinforcement details and the concrete strength; moreover, the NCHRP equation can be conservatively applied to various local anchorage zones for the prediction of the ultimate bearing strength, whereby conditions such as the consideration of the rib area and the calibration factor are changed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.865-871
• /
• 2017

In this paper, a gelatin layer was formed on the surface of the twisted fiber-optic couplers fabricated by hydrofluoric acid, which can be used to measure relative humidity. The proposed method of sensors has advantage of low cost compared with the sensors based on the conventional electronic devices and takes beneficial characteristics of optical fibers and light. The fiber-optic sensors presented in this study show a measurement from about 40% to 85% relative humidity, and the experimental results agree well with the calculated results. Based on the design presented in this paper, the structure will enable promising applications in the detecting humidity and various hazardous gases.

• Steel and Composite Structures
• /
• v.26 no.2
• /
• pp.213-226
• /
• 2018

This paper focuses on the seismic protection of slender old masonry structures by the implementation of prestressing devices at key locations. The devices are vertically and externally located inside the towers in order to be reversible and calibrated. An extensive parametric study on a selected slender tower is carried out based on more than 100 nonlinear static simulations aimed at investigating the impact of different parameters on the seismic performance: (i) different prestressing levels; (ii) shape memory alloy superelasticity and (iii) changes in prestressing-forces in all the stages of the analysis until failure and masonry toe crushing. The tendon materials under analysis are conventional prestressing steel, fiber-reinforced polymers of different fibers and shape memory alloys. The parametric study serves to select the most suitable prestressing device and optimal prestressing level able to dissipate more earthquake energy. The seismic energy dissipation is evaluated by comparing the structural capacity curves in original state and retrofitted.

• Journal of Information Processing Systems
• /
• v.19 no.3
• /
• pp.394-406
• /
• 2023

In this study, a real-time surveillance system using Internet of Things technology is proposed for vaccine cold chains. This system fully visualizes vaccine transport and storage. It comprises a 4G gateway module, lowpower and low-cost wireless temperature and humidity collection module (WTHCM), cloud service software platform, and phone app. The WTHCM is installed in freezers or truck-mounted cold chain cabinets to collect the temperature and humidity information of the vaccine storage environment. It then transmits the collected data to a gateway module in the radiofrequency_physical layer (RF_PHY). The RF_PHY is an interface for calling the bottom 2.4-GHz transceiver, which can realize a more flexible communication mode. The gateway module can simultaneously receive data from multiple acquisition terminals, process the received data depending on the protocol, and transmit the collated data to the cloud server platform via 4G or Wi-Fi. The cloud server platform primarily provides data storage, chart views, short-message warnings, and other functions. The phone app is designed to help users view and print temperature and humidity data concerning the transportation and storage of vaccines anytime and anywhere. Thus, this system provides a new vaccine management model for ensuring the safety and reliability of vaccines to a greater extent.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.4-4
• /
• 2011

Extensive research efforts are directed toward the development of highly sensitive gas sensors using novel nanostructured materials. Among the different strategies for producing sensor devices based on nanosized building blocks, polymeric fiber templating approach which is combined by chemical and physical synthesis routes was attracted much attention. This unique morphology increases the surface area and reduces the interfacial area between film and substrate. Consequently, the surface activity is markedly enhanced while deleterious interfacial effects between film and substrate are significantly reduced. Both effects are highly advantageous for gas sensing applications. In this presentation, facile synthesis of hollow and porous metal oxide nanostructures and their applications in chemical sensors will be discussed.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.33-35
• /
• 2003

Over the last 30 years, water-swellable and water-insoluble hydrogels have been extensively investigated and developed, leading to a large family of materials which have found use in a wide range of biomedical applications such as carriers of soft tissues, wound healing, ophthalmological applications, membranes for artificial kidney, and materials for blood compatible and other medical devices[1-3]. (omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.484-487
• /
• 2004

Symmetric directional couplers are widely used in interferometers, switches, and various signal processing devices. Recently, several optical couplers using multimode fibers were reported, but these suffer from inefficient coupling of light into a branching fiber and/or low directivity. This paper presents the measurement and analysis of loss in the connection of optical fibers via the optical directional couplers. The functionality of the device is based on the principle that is symmetrical, the power in excited mode can be unambiguously directed into one of the output channel by varying and of its parameters. In this experiment, we measure the power of loss in the optical directional coupler at various radius of curvature. Before the measurement of loss in x-coupler, we polish the contact of the fiber surface in order that light can penetrate through another port. The results show that, when the radius of curvature is increased, the loss power is decreased and also approaches of the straight line case.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.124-127
• /
• 2004

This study is to investigate the bond characteristics of glass fiber reinforced polymer(GFRP) reinforcing bars in concrete by pullout test experimentally. Three different types of GFRP bars with different surface deformations were considered in this study. Also, standard deformed steel reinforcing bar with or without epoxy-coating were included for the comparisons of bond strength. All test procedures including specimens preparation, test apparatus and measuring devices were made according to the recommendation of CSA(Canadian Standards Association) Standard S806-02. From the test results, it was found that small surface indentations contributed to increase the bond strength of GFRP bar significantly. Based on the limited test results till now, the bond strength of GFRP bar with sand-coated deformation commercially available in foreign market is around $80\%$ of that of steel deformed bars.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.558-561
• /
• 2005

In-situ photopolymerization of alkyl acrylate monomers in the presence of a nematic fluid provides a cellular matrix of liquid crystalline droplets in which the chemical structure of the encapsulating polymer exerts control over the alignment (anchoring) of the liquid crystalline molecules. Control is obtained by variation of the alkyl side chains and through copolymerization of two dissimilar monofunctional acrylates. Two monofunctional acrylates with opposing tendencies on copolymerization provide control over the tunability of anchoring over a wide temperature range. Using various acrylates we show that a uniform vertical alignment can be achieved over a large area. Utilizing this technique and a nematic with negative dielectric anisotropy, we have fabricated highly flexible liquid crytal based devices, with high contrast and fast response time, without using any alignment layer.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.117-120
• /
• 2003

PON (Passive Optical Network) is an emerging local subscriber access architecture that provides more bandwidth and services to subscriber than DSL (Digital Subscriber Line and HFC (Hybrid-Fiber Coaxial) network. A PON is a point-to-multipoint optical network with no active elements in the signals' path from source to destination. Advantages of using PON for a subscriber access network include large coverage area, reduced fiber deployment, multicast and broadcast capabilities, reduced cost of maintenance (due to devices being passive), and ease of upgrades to higher bit rate or additional wavelengths. PON uses WDM (Wavelength Division Multiplexing) technique that transmits the downstream and upstream data at each different wavelength. For transmitting the CATV (Community Antenna television) service through PON network, we give out additional wavelength. This study shows the available TPS (Triple play service) architecture using CATV overlay EPON (Ethernet PON) architecture and analyzes the effects of EPON-based CATV transmission by measuring the power loss fur each wavelength and the power range of the available analog wavelength and RF.