• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.624-629
• /
• 2022

Formaldehyde is an indoor pollutant that is harmful to humans, such as causing respiratory and skin diseases. Nitrogen plasma treatment was performed to introduce nitrogen groups on the surface of the activated carbon fibers (ACFs), and the adsorption characteristics of formaldehyde for the surface-modified ACFs were considered. As the nitrogen gas flow rate increased, the content of nitrogen functional groups introduced to the surface of the ACFs increased by about 7%, and the ratio of nitrogen functional groups to each type present was similar. Ultramicropores increased on the ACFs surface due to the etching effect of plasma treatment. The adsorption efficiency of formaldehyde on the modified ACFs surface was also enhanced. However, under the nitrogen flow rate of 120 sccm or more, the surface of the ACFs was excessively etched, and the specific surface area and the formaldehyde adsorption capacity decreased. Therefore, the content of the nitrogen groups is the main factor in the adsorption of formaldehyde on the nitrogen plasma-treated ACFs, but it can be found that the adsorption efficiency of formaldehyde is improved when the ACFs have a suitable pore structure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.2
• /
• pp.317-328
• /
• 1995

The objective of this study was to determine the effects of low temperature plasma on the surface properties of polyester fabric with respect to wettability and water repellency. Highly wettable polyester fabric surfaces were obtained by oxygen treatment. The improved wettabililty of oxygen plasma treated fabrics decreased with aging time up to 30 days, and then the wettability remained relatively constant and still exhibited significant improvement compared to that of untreated polyester. Water repellency was significantly improved by tetratfluorocarbon plasma treatment. Such an improvement appears due to introduced fluo\ulcornerrine atoms or a thin fluorocarbon film on the fiber surface. Water repellency remained constant in fact, even after 150 days.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.402-406
• /
• 2013

In this study, a pitch for melt-electrospinning was prepared from naphtha cracking bottom (NCB) oil by the modification with heat treatment. The softening point and property of the modified pitch was influenced by modification conditions such as nitrogen flow rate, heat treatment temperature, and reaction time. Among these, the heat treatment temperature had a very strong influence on the distribution of molecular weight and softening point of the pitch. The C/H mole ratio and average molecular weight increased with increasing the heat treatment temperature due the decomposition and cyclization reaction of surface-functional groups. In addition, the values of benzene insoluble and quinoline insoluble also tends to decrease, and the width of molecular weight distribution seems to get more narrow. The carbon fiber with a diameter of $4.8{\mu}m$ was prepared from a modified pitch at the softening point of $155^{\circ}C$ by melt-electrospinning. It is believed that the melt-electro spinning method is much more convenient to get the thinner fiber than the conventional melt spinning method.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1233-1235
• /
• 1993

With the Contact angle of phase epoxy resin on the inorganic filler(glass plate) surface treated with air plasma, we have studied about the interface between epoxy resin and glass plate as simple model of a glass fiber reinforced composite materials. The contact angle on the inorganic filler surface varied with ambient temperature and surface treatment conditions.

• Membrane and Water Treatment
• /
• v.14 no.2
• /
• pp.85-93
• /
• 2023

Membrane separation is widely used for several applications such as water treatment, membrane reactors and climate change. Cross-linked organic-inorganic hybrid polyvinylidene fluoride (PVDF) / Tetraethyl orthosilicate (TEOS) was adopted for the preparation of optimized hollow membrane (HFM) for membrane distillation or other low pressure separators for mechanical properties and permeability under varying pretreatment schemes. HFMs were prepared on semi-pilot membrane fabrication system. Novel adopted post-treatment schemes involved soaking in glycerol, magnesium sulphate (MgSO₄), sodium hypochlorite (NaOCl), and isopropanol for different durations. All fibers were characterized for morphology using a scanning electron microscope (SEM), surface roughness using atomic force microscope (AFM), elemental composition by examining Energy Dispersive Spectroscopy (EDS), water contact angle (CA°) and porosity. The performance of the fibers was evaluated for pure water permeation flux (PWF). Post-treatment with MgSO₄ gave the highest both tensile modulus and flux. Assessment of properties and performance revealed comparable results with other organic-inorganic separators, HF or flat. In spite of few reported data on post treatment using MgSO₄ in presence of TEOS, this proves the potential of low cost treatment without negative impact on other membrane properties. The flux is also comparable with hypochlorite which manifests substantial precaution requirements in actual industrial use.The relatively high values of flux/bar for sample treated with TEOS, post treated with MgSO₄ and hypochlorite are 88 and 82 LMH/bar respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.5 s.153
• /
• pp.772-778
• /
• 2006

Silk organza can make the silhouette of clothes bulky and rich, owing to its stiffness. And silk organza in the gum has better dyeability so can be dyed more bright and deeper color than scoured silk because silk organza has sericin gum that has better dyeability than fibroin. So, silk organza came into the most broad use as the material for Hanbok, especially in summer. But the silk organza has poor color fastness. Sericin is removed from organza when silk organza go through scouring. The purpose of this research is to find out the optimum conditions that the scoured silk fabrics can get stiffness by persimmon juice treatment. For experiments, non scoured, partially scoured and fully scoured silk fabrics were prepared by alkali treatments. Then 3 kinds of silk fabrics were treated with the concentration of 1, 5, 10, 50 and 100% of persimmon Juice. The change of fiber surface of the various silk fabrics were observed By SEM. The hand values of those fabric samples also were measured hand values by Kawabata Evaluation System and stiffness by Cantilaver method. By scouring, the silk organza got more flexibility and less cohesiveness between their fibers. And it can be a little more bulky by removing gum. Namely, silk organza lost its unique stiff and crisp handle. By the persimmon juice treatment, tannin component could be coated on the fiber surface. so that the stiffness of the fabrics were improved.

• Journal of Fashion Business
• /
• v.10 no.5
• /
• pp.45-57
• /
• 2006

In the previous study, african marigold petals extract was valued as an excellent natural yellow dye because of its distinguished reactivity with various mordants and color fastness. In this study, we were studied on effect of absorbed metal ion by after-treatment of mordants on the color and fastness in human hair and wool fiber dyed with african marigold petals extract because the proteinic and cellulosic fiber were very well dyed. The dyed human hair showed better dyeing ability in the color fastness than wool fiber on tests of light, wash and perspiration. The absorbed metal ion concentration of mordanted human hairs were 1 or 5 times higher than wool fibers. However, excess of absorbed metal ion haven't consistent effect on K/S and surface color. Human hairs dyed using african marigold extract and mordanted with Al, Sn, Cu and Fe were showed various reddish yellow color groups and good dyeing ability on african marigold extract.

• Membrane and Water Treatment
• /
• v.8 no.1
• /
• pp.35-50
• /
• 2017

The theoretical membrane gas absorption module treatments in a hollow fiber gas-liquid membrane contactor using Happel's free surface model were obtained under countercurrent-flow operations. The analytical solutions were obtained using the separated variable method with an orthogonal expansion technique extended in power series. The $CO_2$ concentration in the liquid absorbent, total absorption rate and absorption efficiency were calculated theoretically and experimentally with the liquid absorbent flow rate, gas feed flow rate and initial $CO_2$ concentration in the gas feed as parameters. The improvements in device performance under countercurrent-flow operations to increase the absorption efficiency in a carbon dioxide and nitrogen gas feed mixture using a pure water liquid absorbent were achieved and compared with those in the concurrent-flow operation. Both good qualitative and quantitative agreements were achieved between the experimental results and theoretical predictions for countercurrent flow in a hollow fiber gas-liquid membrane contactor with accuracy of $6.62{\times}10^{-2}{\leq}E{\leq}8.98{\times}10^{-2}$.

• Textile Coloration and Finishing
• /
• v.29 no.3
• /
• pp.148-154
• /
• 2017

Many researches have been made on the processing technology of Poly(ethylene terephthalate) (PET), which is widely used for clothing and non-clothing applications. In this study, we coated PET filaments with m-aramid resin to improve heat resistance and antimicrobial properties. In order to enhance adhesion between PET and m-aramid polymer, the adhesive polymer was coated on the PET filaments using a winding speed of 100m/min and then treated with m-aramid. Scanning electron microscopy was used to analyze the surface of the adhesive polymer and m-aramid treated PET filament. The change of initial degradation temperature according to treatment was confirmed by thermogravimetric analysis. Antimicrobial activity analysis using bacterial reduction method showed that PET filament treated with adhesive polymer and m-aramid had an increased antibacterial effect compared to untreated PET filament.

• Journal of Adhesion and Interface
• /
• v.13 no.2
• /
• pp.58-63
• /
• 2012

CFRP chip is the byproduct from carbon fiber reinforced plastic (CFRP) processing. CFRP chip is not simply a waste mainly composed of fine carbon fiber and epoxy resin. CFRP chip keeps matrix to maximize their reinforcing effect. To obtain a uniform length of carbon fiber in CFRP chip, chip was chopped ina mortar. CFRP chip should be purified to get better interface adhesion. Epoxy resin on the carbon fiber was removed by $H_2O_2$ surface etching treatment. Optimal dispersion and fabrication conditions of CFRP chip embedded in phenolic resin were determined by thermal stability for fire retardant applications. CFRP chip-phenolic composite exhibits better mechanical and thermal properties than neat phenolic resin. Surface condition of CFRP chip-phenolic composite was evaluated by static contact angle measurement. Contact angle of CFRP chip-phenolic composite was greater than neat phenolic due to heterogeneous condition of fine carbon fibers. From the evaluation for fire retardant (ASTM D635-06) test, thermal stability of CFRP chip-phenolic composite was found to be improved with higher concentration of CFRP chip.