• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.253-256
• /
• 2008

복합섬유(Fiber Reinforced Polymers)가 외부 부착된 철근콘크리트 보에 관한 연구는 국내 및 세계 여러나라에서 활발히 진행되고 있으나 장기 거동에 관한 연구는 많이 미흡한 실정이다. 본 연구에서는 현재 국내에서 많이 사용되고 있는 탄소섬유(Carbon Fiber Reinforced Polymers)와 유리섬유(Glass Fiber Reinforced Polymers)를 철근 콘크리트 보에 외부 부착시킨 후 300일간 지속하중하에서 철근의 변형률, FRP의 변형률을 측정함으로써 FRP 보강 실험체의 시간의존적 거동을 파악하였다. 또한, Adjusted Effective Modulus Method, (AEMM)과 Ghali and Farve의 방법을 사용하여 시간경과에 따른 크리프와 건조수축에 의한 응력과 변형률의 변화를 예측하였다. 실험결과, RC보의 휨 보강 측면으로 보았을 때, CFRP가 GFRP보다 장기거동에 있어 우수한 성능을 보이는 것으로 나타났으며, 이론 식으로 산정된 값은 무보강 실험체의 철근 변형률의 경우 비교적 유사하게 예측하고 있으나 FRP로 보강된 실험체들의 인장철근은 다소 과대평가하는 결과를, 압축철근은 과소평가하는 결과를 나타냈다.

• Steel and Composite Structures
• /
• 제14권1호
• /
• pp.41-55
• /
• 2013

Fiber reinforced polymers (FRP) materials are increasingly being used for strengthening and repair of steel structures. An issue that concerns engineers in steel members which are retrofitted with FRP is stress experienced due to temperature changes. The changing temperature affects the interface bond between the FRP and Steel. This research focused on the effects of cyclical thermal loadings on the interface properties of FRP bounded to steel members. Over fifty tests were conducted to investigate the thermal effects on bonding between FRP and steel, which were cycled from temperature of $-11^{\circ}C$ ($12^{\circ}F$) to $60^{\circ}C$ ($140^{\circ}F$) for 21-36 days. This investigation consisted of two test protocols, 1) the tensile test of epoxy resin, tack coat, FRP and FRP-steel plate, 2) tensile test of each FRP compound and FRP with steel after going through thermal cyclic loading. This investigation reveals an extensive reduction in the composite's strength.

• 한국전산구조공학회논문집
• /
• 제24권1호
• /
• pp.23-31
• /
• 2011

본 연구는 섬유 보강 폴리머(Fiber Reinforced Polymers, 이하 FRP) bar로 보강된 콘크리트 깊은보의 전단강도을 평가하기 위하여 전단경간비, 보강비, 유효깊이, 주근의 종류를 변수로 총 15개의 시험체에 대한 전단 실험을 수행하였다. 전단 실험을 토대로 FRP bar로 보강된 콘크리트 깊은보의 균열 및 처짐에 대한 거동 조사를 수행하였으며, ACI 318-08의 스트럿-타이 모델(이하 STM)을 이용한 전단강도와 아치작용을 고려한 기존 제안식에 의한 전단강도를 비교 평가하였다. 그 결과 FRP bar로 보강한 경우가 Steel bar로 보강한 경우보다 전단강도가 증가하는 것으로 나타났으며, 전단강도 산정에 있어 ACI 318-08 STM을 이용한 방법이 경험식에 의한 방법보다 상대적으로 정확했다.

• Structural Engineering and Mechanics
• /
• 제64권5호
• /
• pp.557-566
• /
• 2017

Fiber reinforced polymer (FRP) sheets are the most efficient structural materials in terms of strength to weight ratio and its application in strengthening and retrofitting of a structure or structural elements are inevitable. The performance enhancement of structural elements without increasing the cross sectional area and flexible nature are the major advantages of FRP in retrofitting/strengthening work. This research article presents a detailed study on the inelastic response of conventional and retrofitted Reinforced Concrete (RC) frames using Carbon Fibre Reinforced Polymers (CFRP) and Glass Fiber Reinforced Polymers (GFRP) subjected to quasi-static loading. The hysteretic behaviour, stiffness degradation, energy dissipation and damage index are the parameters employed to analyse the efficacy of FRP strengthening of brick in-filled RC frames. Repair and retrofitting of brick infilled RC frame shows an improved load carrying and damage tolerance capacity than control frame.

• Advances in concrete construction
• /
• 제2권4호
• /
• pp.281-300
• /
• 2014

This study presents the experimental results of twenty three reinforced concrete beams with rectangular web openings externally strengthened with Fiber Reinforced Polymers (FRP) composites bonded around openings. All tested beams had the same geometry and reinforcement details. At openings locations, the stirrups intercepted the openings were cut during fabrication of reinforcement cage to simulate the condition of inclusion of an opening in an existing beam. Several design parameters are considered including the opening dimensions and location in the shear zone, the wrapping configurations, and the amount and the type of the FRP composites in the vicinity of the openings. The wrapping configurations of FRP included: sheets, strips, U-shape strips, and U-shape strips with bundles of FRP strands placed at the top and sides of the beam forming a fan under the strips to achieve closed wrapping. The effect of these parameters on the failure modes, the ultimate load, and the beam stiffness were investigated. The shear contribution of FRP on the shear capacity of tested beams with web openings was estimated according to ACI Committee 440-08, Canadian Standards S6-06, and Khalifa et al. model and examined against the test results. A modification factor to account for the dimensions of opening chords was applied to the predicted gain in the shear capacity according to ACI 440-08 and CSA S6-06 for bonded Glass Fiber Reinforced Polymers (GFRP) around openings. The analytical results after incorporating the modification factor into the codes guidelines showed good agreement with the test results.

• Computers and Concrete
• /
• 제14권2호
• /
• pp.163-174
• /
• 2014

Damping as a material property plays an important role in decreasing dynamic response of structures. However, very little is known about the evaluation and application of the actual damping of Fiber Reinforced Polymer Confined Reinforced Concrete (FRP-C RC) material which is widely adopted in civil engineering at present. This paper first proposes a stress-dependent damping model for FRP-C RC material using a validated Finite Element Model (FEM), then based on this damping-stress relation, an iterative scheme is developed for the computations of the non-linear damping and dynamic response of FRP-C RC columns at any given harmonic exciting frequency. Numerical results show that at resonance, a considerable increase of the loss factor of the FRP-C RC columns effectively reduces the dynamic response of the columns, and the columns with lower concrete strength, FRP volume ratio and axial compression ratio or higher longitudinal reinforcement ratio have stronger damping values, and can relatively reduce the resonant response.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.515-520
• /
• 2001

This study discusses the flexural performance of rehabilitated composite sections, consisting originally of R/C beams and subsequently strengthened by, Hybrid Fiber Reinforced Polymers(FRPs) and adhesives. Experimentations were peformed with 8 specimens to compare the rehabilitated effect of the length of FRPs, 2plies of FRPs, and 3plies of FRPs. The results show that the increase of the FRP strengthening length is effective on the flexural capacity and strength. Also, R.C beams retrofitted with hybrid FRPs are more effective on the increase of flexural capacity, strength, stiffness, and ductility than with a single kind of FRPs.

• Structural Engineering and Mechanics
• /
• 제77권5호
• /
• pp.673-689
• /
• 2021

This paper addresses the efficiency of thermal insulation layers applied to protect structural elements strengthened by fiber-reinforced polymers (FRP) in the case of fire event. The paper presents numerical modeling and nonlinear analysis of reinforced concrete (RC) columns externally strengthened by FRP and protected by thermal insulation layers when subjected to elevated temperature specified by standard fire tests, in order to predict their residual capacity and fire endurance. The adopted numerical approach uses commercial software includes heat transfer, variation of thermal and mechanical properties of concrete, steel reinforcement, FRP and insulation material with elevated temperature. The numerical results show good agreement with published results of full-scale fire tests. A parametric study was conducted to investigate the influence of several variables on the structural response and residual capacity of insulated FRP-confined columns loaded by service loads when exposed to fire. The residual capacity of FRP-confined RC column was affected by concrete grade and insulation material and was shown to improve substantially by increasing the concrete cover and insulation layer thickness. By increasing the VG insulation layer thickness 15, 32, 44, 57 mm, the loss in column capacity after 5 hours of fire was 30%, 13%, 7% and 5%, respectively. The obtained results demonstrate the validity of the presented approach for estimation of fire endurance and residual strength, as an alternative for fire testing, and for design of fire protection layers for FRP-confined RC columns.

• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.275-282
• /
• 2006

최근 철근 콘크리트 구조물에서 철근의 부식문제를 근본적으로 해결하기 위한 대안으로 섬유강화폴리머(Fiber Reinforced Polymers, FRP)가 주목받고 있다. FRP는 철근에 비해 높은 비강도를 가지며, 무게가 가볍다. 특히 내부식성이 뛰어나 염해와 같은 열악한 환경에 특히 유용하다. 그러나 재료단가가 철근에 비해 높고, 장기거동에 대해 구축되어 있는 정보가 적으며 항복 거동을 보이는 철근과는 달리 취성파괴를 일으키기 때문에 FRP를 토목재료로 사용하려는 노력은 더디게 진행되고 있다. FRP 제작에 사용되는 섬유 중 유리섬유가 가장 경제적이지만 강성이 철근에 비해 대략 1/4 정도 밖에 되지 않아 휨부재에 사용될 경우 과도한 처짐 문제가 발생한다. 이에 본 연구에서는 유리섬유로 제작된 FRP(Glass Fiber Reinforced Polymer, GFRP) 로드(Rod)의 인장특성을 개선하고자 탄소와 유리섬유로 제작된 하이브리드 로드의 인장특성에 관한 연구를 수행하였다. 로드 제작에 사용되는 수지 종류와 배치 방법에 대해 변수를 설정하여 총 40개의 시편을 제작하여 인장실험을 실시하였다. 하이브리드 로드의 인장특성은 섬유가 혼합되지 않은 순수한 유리섬유와 탄소섬유로만 제작된 로드의 인장특성과 비교하였다. 실험 결과에 따르면 로드의 핵은 탄소섬유로, 외피는 유리섬유로 제작된 하이브리드 로드의 인장특성이 가장 우수하였다.

• Steel and Composite Structures
• /
• 제11권6호
• /
• pp.455-468
• /
• 2011

Although retrofitting and strengthening reinforced concrete (RC) columns by wrapping fiber reinforced polymer (FRP) composites have become a popular technique in civil engineering, the study on reinforced high-strength concrete (HSC) columns is still not sufficient. The objective of these companion papers is to investigate the mechanical properties of reinforced HSC square columns confined by aramid FRP (AFRP) jackets under concentric compressive loading. In the part I of these companion papers, an experiment was conducted on 54 confined RC specimens and nine unconfined plain specimens, the considered parameters were the concrete strength, the thickness of AFRP jackets, and the form of AFRP wrapping. The experimental process and results are presented in detail. Subsequently, some discussions on the confinement effect, failure modes, strength, and ductility of the columns are carried out.