• Design & Manufacturing
• /
• 제13권1호
• /
• pp.25-30
• /
• 2019

This paper presents the design strategy for the optimal RTM molds of Carbon Fiber Reinforced Plastic (CFRP) by carbon fiber draping and resin flow simulation. First, the mold shape and molding condition were determined considering the undercut and die face of the product in the draping simulation, which made the preliminary shape of the product by compressing the carbon fiber. After that, the diffusion behavior during the injection of resin in the mold was predicted by the resin flow simulation. Finally, the optimal mold shape was designed by selecting the locations of resin injection port and vent based on total results of simulations. In this paper, the mold of automotive side mirror case was selected as the representative product. Also, the actual mold was manufactured based on the simulation design to confirm the practicality of it. This study is expected to contribute to the industry as a technology to improve the reliability and productivity of CFRP producted by RTM process.

• Journal of the Korean Wood Science and Technology
• /
• 제52권4호
• /
• pp.393-403
• /
• 2024

As an archipelagic country, Indonesia is surrounded by large and small islands. Many mangrove plant species are found along the coasts surrounding large and small islands. Besides their conservation value, mangrove plants provide various benefits, including the use of their leaves, fruit, bark, and wood as raw materials in pharmaceutical and other industries. Additionally, mangrove wood is a potential raw material for pulp and paper production. It is essential to study the fiber dimensions of the wood to identify the appropriate characteristics of raw material for pulp and paper. Therefore, in this study, we comprehensively analyzed the differences in the wood fiber dimensions of seven mangrove species from the Indramayu Regency, West Java Province, namely Avicennia alba, Bruguiera gymnorhiza, Bruguiera cylindrica, Hibiscus tiliaceus, Sonneratia ovata, Sonneratia caseolaris, and Excoecaria agallocha. For this analysis, maceration followed the Forest Product Laboratory guidelines, and preparation followed the Sass method. The fiber length, diameter, and lumen diameter were measured using a light microscope. Based on the values of the length and dimension derivatives, the fibers of these mangrove wood species were grouped into quality classes II or III for use as raw materials for the pulp and paper industry. The wood fibers of H. tiliaceus, A. alba, S. caseolaris, and E. agallocha met the quality class criterion II, whereas wood species fibers of B. gymnorhiza, B. cylindrica, and S. ovata met the quality class criterion III.

• 섬유기술과 산업
• /
• 제1권3호
• /
• pp.389-400
• /
• 1997

• 섬유기술과 산업
• /
• 제1권4호
• /
• pp.481-487
• /
• 1997

• 한국생활과학회지
• /
• 제19권2호
• /
• pp.389-398
• /
• 2010

This study examines the relationship between the concern about well-being lifestyle and the perceived image of Hanji fiber. A survey was conducted among male and female consumers aged 20 and over in Jeonju and Daejon from January 4th to 11th, 2008. A total of 168 responses were analyzed by using descriptive statistics, factor analysis, and ANOVA via the SPSS ver. 12. As a result, four factors were determined in the concern for a well-being lifestyle; product consumption, enjoying culture, using therapy and managing the household. The perceived image of Hanji fiber were classified into four elements; traditional, high-quality, functional and popular images. Among the factors of the concern for a well-being lifestyle and the perceived image of Hanji fibers, a partial relationship was observed. There is a positive relationship, especially between the product consumption factor of a well-being lifestyle and the high-quality and functional image of Hanji fiber. Also, there was a positive relationship between the factor of managing the household and the traditional image of Hanji fiber. However, the therapy interest factor of a well-being lifestyle was negatively related to the traditional image of Hanji fiber.

• 콘크리트학회논문집
• /
• 제13권4호
• /
• pp.346-353
• /
• 2001

본 연구는 얇은 시멘트판 제품의 보강재로써 건조공정에 의해 생산된 폐지섬유의 최적 배합비를 도출하기 위하여 수행되었다. 이를 위해 순수 목질섬유 대비 폐지섬유의 대체수준을 세분화하여 실험을 실시하였으며, 슬러리-탈수 공법을 사용하여 폐지섬유보강 시멘트 복합체를 제조하였다. 본 연구는 실험적 연구와 반응표면 분석법을 활용한 통계적 분석을 통해 공정인자(가압, 비가압)과 섬유보강재 조건(섬유혼입율, 순수섬유 대체수준)을 최적화하였다. 최적화된 재생 폐지섬유 시멘트 복합체를 기술적으로 분석하였으며, 그 결과, 폐지섬유보강 시멘트 복합체의 성능과 경제적 측면에서 폐지섬유의 재활용이 가능하리라 판단된다.

• Design & Manufacturing
• /
• 제18권3호
• /
• pp.9-14
• /
• 2024

Among the various plastic polymer molding methods, thermoplastic resins are most commonly used for mass production due to their suitability for high-volume manufacturing. However, recently, thermosetting resins have been utilized depending on product design and functionality, necessitating appropriate mold design and injection conditions to achieve suitable molded products. Therefore, resin selection must be considered not only in terms of product design but also based on functionality, taking into account the physical and mechanical properties of the resin. Additionally, since the flow characteristics of the resin are critical in injection molding, molding conditions should be set according to the thermal, physical, and rheological properties of the resin.This study focuses on the effects of filler content (glass fiber) in thermosetting fiber-reinforced plastics (FRP), specifically Bulk Molding Compound (BMC) resin, which is crucial for thermal deformation in automotive motor housing products. The resins used in this study include Generic BMC1 resin, BMC1 with 15% glass fiber, and BMC1 with 30% glass fiber. The research employs CAE (Computer-Aided Engineering) to investigate strain under basic conditions for the BMC resin and the strain variations with the addition of glass fiber. It also examines the impact of filler content on injection molding conditions, specifically mold temperature and curing time. Experimental results indicate that mold temperature has the most significant effect among the injection conditions, while the impact of curing time was relatively minor.

• 한국축산식품학회지
• /
• 제32권1호
• /
• pp.54-61
• /
• 2012

Makgeolli lees is a by-product of the makgeolli brew processing. Makgeolli lees contains high levels of fibers, which can be separated and used to develop foods rich in dietary fibers. The purpose of this study was to determine the effect of makgeolli fibers (0-4%) on proximate composition, caloric content, pH, color, cooking yield, textural profile, and sensory characteristics of chicken-emulsion sausages. The moisture content of 1, 2, and 3% makgeolli lees fiber-amended product was higher than the control, while that of the 4% product was not. Total calorie estimates of makgeolli lees fiber-amended sausages were lower than the control, except for in the case of the 4% treatment. Moreover, chicken sausages supplemented with makgeolli lees fiber had higher cooking yields and improved textural properties. Chicken emulsion sausages prepared with makgeolli lees fiber had improved overall acceptability, and the best results of sensory characteristics were obtained for the emulsion sausages containing 2% makgeolli lees fiber.

• Composites Research
• /
• 제28권6호
• /
• pp.340-347
• /
• 2015

VARTM 공정에서 고분자 수지가 함침 될 때 시간에 따라 섬유보강재가 팽창하여 섬유체적율이 감소하는 현상이 발생한다. 풍력 블레이드와 같은 대형 복합재료 구조물의 경우 섬유체적율의 변동 폭이 커져 제품의 치수가 변하고 기계적 물성이 저하될 뿐 아니라 예측하지 못한 고분자 수지의 사용량이 증가하는 등의 문제점과 경제적인 손실이 발생할 여지가 증가할 수 있다. 본 연구에서는 VARTM 공정에서 수지 함침에 따른 섬유 보강재의 팽창 현상에 관한 분석을 통하여 복합재료 액상 성형 공정에서의 섬유 체적율을 조절하는 방안을 모색하였다. 그 결과 유동 선단의 진행에 따라 섬유의 팽창 현상이 크게 두 단계로 구분되어 나타나는 것을 확인하였고 각각의 단계에서 작용하는 힘을 분석함으로써 섬유의 체적율 변화에 관한 현상학적 모델을 제시하였고 1차원 편미분 수치 해석과 연계하여 VARTM공정에서 수지 함침에 따른 섬유 체적율의 변화를 예측하였다.

• 한국레이저가공학회지
• /
• 제16권3호
• /
• pp.22-26
• /
• 2013

Fiber laser welding was performed on SUS Materials metal bellows. The results can be summarized as follows: When we tried to change welding focus location. we get the best welding line when focus location placed 0mm. In product welding, We could make a satisfactory product in constant area by applying optimized conditions and show a table that is able to help producer easily to apply it to manufacturing. In comparison with existing TIG and plasma welding, welded bellows by fiber laser has faster processing speed, smaller thermal effect, very narrow welding area and fine surface.